Abstract:In the pathway towards decarbonization, hydrogen can provide valid support in different sectors, such as transportation, iron and steel industries, and domestic heating, concurrently reducing air pollution. Thanks to its versatility, hydrogen can be produced in different ways, among which steam reforming of natural gas is still the most commonly used method. Today, less than 0.7% of global hydrogen production can be considered low-carbon-emission. Among the various solutions under investigation for low-carbon hydrogen production, membrane reactor technology has the potential, especially at a small scale, to efficiently convert biogas into green hydrogen, leading to a substantial process intensification. Fluidized bed membrane reactors for autothermal reforming of biogas have reached industrial maturity. Reliable modelling support is thus necessary to develop their full potential. In this work, a mathematical model of the reactor is used to provide guidelines for their design and operations in off-design conditions. The analysis shows the influence of temperature, pressures, catalyst and steam amounts, and inlet temperature. Moreover, the influence of different membrane lengths, numbers, and pitches is investigated. From the results, guidelines are provided to properly design the geometry to obtain a set recovery factor value and hydrogen production. For a given reactor geometry and fluidization velocity, operating the reactor at 12 bar and the permeate-side pressure of 0.1 bar while increasing reactor temperature from 450 to 500 °C leads to an increase of 33% in hydrogen production and about 40% in HRF. At a reactor temperature of 500 °C, going from 8 to 20 bar inside the reactor doubled hydrogen production with a loss in recovery factor of about 16%. With the reactor at 12 bar, a vacuum pressure of 0.5 bar reduces hydrogen production by 43% and HRF by 45%. With the given catalyst, it is sufficient to have only 20% of solids filled into the reactor being catalytic particles. With the fixed operating conditions, it is worth mentioning that by adding membranes and maintaining the same spacing, it is possible to increase hydrogen production proportionally to the membrane area, maintaining the same HRF.

An Integrated Modeling Method for Membrane Reactors and Optimization Study of Operating Conditions

Thermodynamic Simulation of Hydrogen Production from the Nano-Cao Reactive Sorption Enhanced Biomass Steam Reforming

Process optimization of CO2membrane and cryogenic hybrid separation

Techno-economic Analysis and Optimization of a Novel Hybrid Solar-Wind-bioethanol Hydrogen Production System Via Membrane Reactor

Synergistic Enhancement of Reaction and Separation for a Solar Membrane Reactor by Topology Optimization of Catalyst Bed

Modeling and Simulation of Water-Gas Shift Reactors with and without Membrane

Multiple-objective optimization on ammonia decomposition using membrane reactor

Design Optimization of a Molten Salt Heated Methane/steam Reforming Membrane Reactor by Universal Design Analysis and Techno-Economic Assessment

Multi-objective optimization for membrane reactor for steam methane reforming heated by molten salt

Optimization of Small-Scale Hydrogen Production with Membrane Reactors

Use of A Reactor Network Model in the Design and Operation of A New Type of Membrane Wall Entrained Flow Gasifier

Optimization of an experimental membrane reactor for low-temperature methane steam reforming

Modeling and Simulation of Biodiesel Production Using a Membrane Reactor Integrated with a Prereactor

Rapid Prediction, Optimization and Design of Solar Membrane Reactor by Data-Driven Surrogate Model

Total entropy generation rate minimization configuration of a membrane reactor of methanol synthesis via carbon dioxide hydrogenation

CFD simulation of methane steam reforming in a membrane reactor: Performance characteristics over range of operating window

Hydrogen production and geometry optimization of ethanol steam reforming combining water gas shift reaction in a crossflow membrane tube reactor

Computational modelling of methanol autothermal reforming phenomena in microchannel reactors for hydrogen production

Thermodynamic Optimization of Ammonia Decomposition Solar Heat Absorption System Based on Membrane Reactor

Transient Numerical Modeling and Model Predictive Control of an Industrial-Scale Steam Methane Reforming Reactor

Mathematical Modeling of a Three-Compartment Electro-Reactor Process with Ion-Exchange Membranes for Recycling and Resource Recovery of Desulfurization Residuals