Abstract:As a high-performance building material, fiber-reinforced concrete (FRC) has attracted garnered significant interest in practical engineering construction. However, the effect of coupled static-dynamic loading on the dynamic response of FRC remains far from understood, which seriously limits its wide application. In this study, a series of coupled static-dynamic loading tests are conducted on four types of FRC specimens using the modified split Hopkinson pressure bar (SHPB) system, and the influences of static pre-stress and strain rate on the mechanical performance of FRC under coupled static-dynamic loading are systematically analyzed. The experimental results indicate that static pre-stress generally reduces the dynamic strength and energy dissipation density, but increases the total strength and fragmentation degree of FRC. As the pre-stress ratio increases from 0 to 0.6, the dynamic strength of FRC decreases ranging from 12 to 25%, and the total strength increases ranging from 12 to 34%. The failure features of FRC specimens changes from tensile failure mechanism to tensile-shear mixed mechanism with increasing the static pre-stress. Combining the scanning electron microscope (SEM) and mercury intrusion porosimetry (MIP) techniques, the microscopic structure and fracture mechanisms of FRC specimens are revealed, and the underlying influencing mechanisms of the static pre-stress, strain rate and fibers are further discussed. The axial pre-stress exerts a dual effect on FRC: enhancement by compacting primary voids as well as attenuation by stimulating secondary microcracks. The strain rate dominates the mechanical performance of FRC under coupled static-dynamic loading, and the influence of pre-stress is diminished by higher strain rates. In addition, the fiber incorporation strengthens the concrete pore structure by bridging action and crack inhibition, resulting in superior mechanical performance compared to normal concrete under coupled static-dynamic loading conditions.

Influence of End Friction Confinement on Dynamic Mechanical Properties and Damage Evolution of Concrete by Coupled DEM-FDM Method

A Dynamic FEM-DEM Multiscale Modeling Approach for Concrete Structures

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

Dynamic Mechanical Properties and Damage Morphology Analysis of Concrete with Different Aggregates Based on FDM-DEM Coupling

A 3D Meso-Scale Model and Numerical Uniaxial Compression Tests on Concrete with the Consideration of the Friction Effect

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

3D Mesoscale Study on the Effect of ITZ and Aggregate Properties on the Fracture Behaviors of Concrete Based on Discrete Element Method

Fracturing behaviors of FRP-strengthened concrete structures

Influence of Fiber Type on the Mechanical Performance and Fracture Mechanism of Fiber Reinforced Concrete under Coupled Static-Dynamic Compression

Numerical Simulation of Dynamic Mechanical Properties of Concrete under Uniaxial Compression

Dynamic Fracture and Dissipation Behaviors of Concrete at the Mesoscale

Mesoscopic Numerical Simulation of Fracture Process and Failure Mechanism of Concrete Based on Convex Aggregate Model

Parametric Analysis on Compressive Strain Rate Effect of Concrete Using Mesoscale Modeling Approach

Mesoscale Numerical Investigation on the Size Effect of Concrete Uniaxial Compressive Strength under Different Contact Friction

DEM analysis of the effect of interface transition zone on dynamic splitting tensile behavior of high-strength concrete based on multi-phase model

Meso-scale Numerical Simulation of the Effect of Aggregate Strength on Damage and Fracture of High-Strength Concrete under Dynamic Tensile Loading

On the fracturing behaviors of FRP-strengthened concrete structures influencing of interfacial material capacities

The Modelling of Compressive Strength of Concrete on Discrete Element Method

Computational technology for analysis of 3D meso-structure effects on damage and failure of concrete

Discrete Element Modelling of Concrete Behaviour under Uniaxial Compressive Test

Effect of Surface Characteristics of Aggregates on the Compressive Damage of High-Strength Concrete Based on 3D Discrete Element Method