Abstract:Solid oxide cell systems (SOCs) are increasingly being considered for electrical energy storage and as a means to boost the use of renewable energy and improve the grid flexibility by power-to-gas electrochemical conversion. The control of several variables (e.g., local temperature gradients and reactant utilization) is crucial when the stacks are used in dynamic operation with intermittent electrical power sources. In the present work, two 1D models of SOC stacks are established and used to investigate their dynamic behavior and to select and tune a suitable control strategy. Subsequently, safe operating ranges were determined to meet the thermal constraints of the stack by analysing not only the fuel cell (SOFC) and electrolyzer (SOEC) individual modes but also the switching between the two modes when the stack operates reversibly. The dynamic analysis shows that the control loops of our multi-input (reactant molar flow rates), multi-output (reactant utilization and maximum local temperature gradients) control system are strongly decoupled. Therefore, a proportional integral control strategy can be used to prevent dangerous stack operating conditions in dynamic operation. Finally, the controllers were tuned, and their transfer functions were reported. Convective heat transfer via air flow allows controlling the temperature of the solid structure of the cell/stack component, thus avoiding issues related to temperature variation during transient operation. Moreover, the reactant utilization controllers can avoid component fracture or degradation owing to fuel starvation under dynamic operation. The process can be approximated by two first order transfer functions. It can help in the design of more complex control systems in the future if necessary, with embedded process models, such as model predictive control. Results in the simulation environment are preparatory to the programming phase of an actual controller in real-world applications.

Fast and Safe Heating-Up Control of a Planar Solid Oxide Cell Stack: A Three-Dimensional Model-in-the-loop Study

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Thermal Management of Reversible Solid Oxide Cells in the Dynamic Mode Switching

A Predictive Model Of Solid Oxide Fuel Cell Stacks For Thermal Mangement

Dynamic modeling of reversible solid oxide cell stack and control strategy development

An Optimization and Fast Load-Oriented Control for Current-Based Solid Oxide Fuel Cell System

Constrained Predictive Controller Design Based on Fuel Exhaustion and Thermal Constraints of A 5 kW SOFC Stack

Modeling and control-oriented thermal safety analysis for mode switching process of reversible solid oxide cell system

Understanding performance difference in the scale-up of flat-chip solid oxide fuel cell: An experimental and numerical study

PEM Fuel Cell Thermal Management Strategy Based on Multi-model Predictive Control

Investigating the performance of a solid oxide electrolyzer multi-stack module with a multiphysics homogenized model

A Reduced-Order Electrochemical Model for Analyzing Temperature Distributions in a Tubular Solid Oxide Fuel Cell Stack

A Practical Compound Controller Design for Solid Oxide Fuel Cells

Numerical simulation acceleration of flat-chip solid oxide cell stacks by data-driven surrogate cell submodels

Lyapunov-Based Fast Finite-State Model Predictive Control for Sensorless Three-Phase Four-Arm MMC

Enhancing fuel cell performance through a dual MPC strategy for coordinated temperature management

Research on modeling and control of PEMFC cooling system

An Agile Layer-Resolved SOFC Stack Model Using Physics-Informed Neural Network

Temperature Model and Predictive Control for Fuel Cells in Switcher Locomotive

Design and implementation of model predictive control for an open-cathode fuel cell thermal management system

Dynamic thermal management of proton exchange membrane fuel cell vehicle system using the tube-based model predictive control