Abstract:Supercritical CO2 (S-CO2) power cycles have demonstrated significant performance improvements in concentrated solar and nuclear applications. These cycles promise an increase in thermal-to-electric conversion efficiency of up to 50% over conventional gas turbines (Wright, S., 2012, “Overview of S-CO2 Power Cycles,” Mech. Eng., 134(1), pp. 40–43), and have become a priority for research, development, and deployment. In these applications the CO2 is compressed to pressures above the critical value using radial compressors. The thermodynamic state change of the working fluid is close to the critical point and near the vapor–liquid equilibrium region where phase change effects are important. This paper presents a systematic assessment of condensation on the performance and stability of centrifugal compressors operating in S-CO2. The approach combines numerical simulations with experimental tests. The objectives are to assess the relative importance of two-phase effects on the internal flow behavior and to define the implications for radial turbomachinery design. The condensation onset is investigated in a systematic manner approaching the critical point. A nondimensional criterion is established that determines whether condensation might occur. This criterion relates the time required for stable liquid droplets to form, which depends on the expansion through the vapor–pressure curve, and the residence time of the flow under saturated conditions. Two-phase flow effects can be considered negligible when the ratio of the two time scales is much smaller than unity. The study shows that condensation is not a concern away from the critical point. Numerical two-phase calculations supported by experimental data indicate that the timescale associated with nucleation is much longer than the residence time of the flow in the saturated region, leaving little opportunity for the fluid to condense. Pressure measurements in a converging diverging nozzle show that condensation cannot occur at the level of subcooling characteristic of radial compressors away from the critical point. The implications are not limited to S-CO2 power cycles but extend to applications of radial machines for dense, saturated gases. In the immediate vicinity of the critical point, two-phase effects are expected to become more prominent due to longer residence times. However, the singular behavior of thermodynamic properties at the critical point prevents the numerical schemes from capturing important gas dynamic effects. These limitations require experimental assessment, which is the focus of ongoing and future research.

Design strategy for inlet conditions of supercritical CO2 centrifugal compressors

EFFECT OF COMPRESSOR INLET CONDITION ON SUPERCRITICAL CARBON DIOXIDE COMPRESSOR PERFORMANCE

Impact of Inlet Conditions on Performance of a Supercritical CO2 Centrifugal Compressor

Optimization of Supercritical Carbon Dioxide Recompression Brayton Cycle Considering Anti-Condensation Design of Centrifugal Compressor

Numerical Investigation On The Flow Characteristics Of A Supercritical Co2 Centrifugal Compressor

Numerical research on performance of new structure centrifugal compressor for supercritical CO 2 power systems

The Influence of Flow Passage Geometry on the Performances of a Supercritical CO2 Centrifugal Compressor

Technical benefits of the subcritical inlet condition for high-speed CO 2 centrifugal compressor in the advanced power-generation cycle

Technical Benefits of the Subcritical Inlet Condition for High-Speed CO2 Centrifugal Compressor in the Advanced Power-Generation Cycle

Numerical Research on Performance of New Structure Centrifugal Compressor for Supercritical CO2 Power Systems

Aerodynamic design and multi-dimensional performance optimization of supercritical CO2 centrifugal compressor

Effects of Near-Critical Condensation and Cavitation on the Performance of S-CO2 Compressor

Numerical Investigations on the Aerodynamic Performance of Supercritical Carbon Dioxide Centrifugal Compressor

Direction for High-Performance Supercritical CO2 Centrifugal Compressor Design for Dry Cooled Supercritical CO2 Brayton Cycle

Design and Performance Analysis of a Supercritical CO2 Centrifugal Compressor With Variable Geometry

Design and Aerodynamic Performance Investigations of Centrifugal Compressor for 150kW Class Supercritical Carbon Dioxide Simple Brayton Cycle

Effect of non-equilibrium phase transition on the aero-thermodynamic performance of supercritical carbon dioxide compressors

An Investigation of Condensation Effects in Supercritical Carbon Dioxide Compressors

Aerodynamic Optimization Design of a 150 kW High Performance Supercritical Carbon Dioxide Centrifugal Compressor without a High Speed Requirement

Theoretical Analysis of Isentropic Exponent Effects on the Internal Flow of Supercritical CO2 Centrifugal Compressors

Influence of Relative Velocity Ratio on Centrifugal Impellers Operating with Supercritical CO2