Abstract:Water pollution by various toxic substances remains a serious environmental problem, especially the occurrence of organic micropollutants including endocrine disruptors, pharmaceutical pollutants and naphthol pollutants. Adsorption process has been an effective method for pollutant removal in wastewater treatment. However, the thermal regeneration process for the most widely used activated carbon is costly and energy-consuming. Therefore, there has been an increasing need to develop alternative low-cost and effective adsorption materials for pollutant removal. Herein, β-cyclodextrin (β-CD), a cheap and versatile material, was modified with methacrylate groups by reacting with methacryloyl chloride, giving an average degree of substitution of 3 per β-CD molecule. β-CD-methacrylate, which could function as a crosslinker, was then copolymerized with acrylamide monomer via free-radical copolymerization to form β-CD-polyacrylamide (β-CD-PAAm) hydrogel. Interestingly, in the structure of the β-CD-PAAm hydrogel, β-CD is not only a functional unit binding pollutant molecules through inclusion complexation, but also a structural unit crosslinking PAAm leading to the formation of the hydrogel 3D networks. Morphological studies showed that β-CD-PAAm gel had larger pore size than the control PAAm gel, which was synthesized using conventional crosslinker instead of β-CD-methacrylate. This was consistent with the higher swelling ratio of β-CD-PAAm gel than that of PAAm gel (29.4 vs. 12.7). In the kinetic adsorption studies, phenolphthalein, a model dye, and bisphenol A, propranolol hydrochloride, and 2-naphthol were used as model pollutants from different classes. The adsorption data for β-CD-PAAm gel fitted well into the pseudo-second-order model. In addition, the thermodynamic studies revealed that β-CD-PAAm gel was able to effectively adsorb the different dye and pollutants at various concentrations, while the control PAAm gel had very low adsorption, confirming that the pollutant removal was due to the inclusion complexation between β-CD units and pollutant molecules. The adsorption isotherms of the different dye and pollutants by the β-CD-PAAm gel fitted well into the Langmuir model. Furthermore, the β-CD-PAAm gel could be easily recycled by soaking in methanol and reused without compromising its performance for five consecutive adsorption/desorption cycles. Therefore, the β-CD-PAAm gel, which combines the advantage of an easy-to-handle hydrogel platform and the effectiveness of adsorption by β-CD units, could be a promising pollutant removal system for wastewater treatment applications.

Sulfonated Polyhedral Oligomeric Silsesquioxane-Cyclodextrin Hybrid Polymers for Efficient Removal of Micropollutants from Water.

Designing MOFs/CuCo-LDHs Hybrid-Based Superhydrophobic Sponge for Speedy Eliminating Microplastics, Dyes, and Oils from High-Salinity Water

Rapid, Complete Removal Of Organic Pollutants From Water By A Sns2-Modified Porous -Cyclodextrin-Containing Polymer

Achievements in Preparation of Cyclodextrin–Based Porous Materials for Removal of Pollutants

Hierarchically Micro-Mesoporous Β-Cyclodextrin Polymers Used for Ultrafast Removal of Micropollutants from Water.

A Crosslinked Β-Cyclodextrin Polymer Used for Rapid Removal of a Broad-Spectrum of Organic Micropollutants from Water.

Post-crosslinking of conjugated microporous polymers using vinyl polyhedral oligomeric silsesquioxane for enhancing surface areas and organic micropollutants removal performance from water

Multifunctional Β-Cyclodextrin Polymer for Simultaneous Removal of Natural Organic Matter and Organic Micropollutants and Detrimental Microorganisms from Water.

Amphiphilic hyper-crosslinked porous cyclodextrin polymer with high specific surface area for rapid removal of organic micropollutants

Multifunctional porous β-cyclodextrin polymer for water purification

Porous calix[4]pyrrole-based polymers with high surface area for efficient removal of polar organic micropollutants from water

β-cyclodextrin-scaffolded crosslinked poly(ionic liquid)s for ultrafast removal of multiple pollutants: Insight into adsorption performance and mechanism

Versatile preparation strategy of negatively charged saccharide-based polymers for selective removal of cationic organic pollutants

Porous multifunctional phenylcarbamoylated-β-cyclodextrin polymers for rapid removal of aromatic organic pollutants

Porous β-cyclodextrin nanotubular assemblies enable high-efficiency removal of bisphenol micropollutants from aquatic systems

Sulfonate-Bonded Conjugated Microporous Polymer Hollowed-Out Spheres to Capture Fluoroquinolone Antibiotics and Cationic Dyes from Wastewater

Ethanolamine- and Amine-Functionalized Porous Cyclodextrin Polymers for Efficient Removal of Anionic Dyes from Water

Removal of the Water Pollutant Ciprofloxacin Using Biodegradable Sorbent Polymers Obtained from Polysaccharides

Quaternary Ammonium Groups Modified Magnetic Cyclodextrin Polymers for Highly Efficient Dye Removal and Sterilization in Water Purification

β-Cyclodextrin-Polyacrylamide Hydrogel for Removal of Organic Micropollutants from Water

Method to Fabricate Porous Multifunction Β-Cyclodextrin Modified Resin for Ultrafast and Efficient Removal of Cu(II) and Bisphenol A