Abstract:Three-phase AC/DC pulse-width-modulated (PWM) converters have been widely employed in various renewable energy systems and industrial applications, which require a high-efficiency power converter operation. This article proposes a technique to reduce switching loss in AC/DC converters by integrating a voltage vector preselection strategy to model predictive virtual flux control. The voltage vector preselection strategy preselects available voltage vectors corresponding to switching states that lead to minimum switching loss in the phase leg, which conducts the highest current. By using preselected voltage vectors, clamping intervals are generated at every fundamental period to maintain the present switching states of the power switches, resulting in the reduction in switching loss. Additionally, by using virtual flux control, the proposed approach can effectively be used under both ideal and distorted source voltage conditions. The proposed method is compared with the conventional model predictive current control and the conventional model predictive virtual flux control. Both a simulation and experiment are performed to validate the correctness and effectiveness of the proposed method, which has been found to decrease the switching loss of an AC/DC converter by up to 15% compared to conventional control schemes at a negligible increase in the input current total harmonic distortion and DC output voltage ripple.

A Variable Switching Frequency Space Vector Pulsewidth Modulation Technique Using Virtual Flux Ripple

A Variable Switching Frequency Space Vector Pulse Width Modulation Control Strategy of Induction Motor Drive System with Torque Ripple Prediction

Virtual Variable Sampling Repetitive Control of Single-Phase DC/AC PWM Converters

Generalized Space Vector Modulation for Ripple Current Reduction in Quasi-Z-Source Inverters

Prediction and Analysis of PWM-Induced Current Ripple of PMSM at Low Switching-to-Fundamental Frequency Ratios

Hybrid Svpwm Technique for Reduced Torque Ripple in Permanent Magnet Synchronous Motor

Current Ripple Reduction for the Quasi-Z-Source Inverter with Modified Space-Vector PWM Strategy

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

PWM Frequency Voltage Noise Cancelation in Three-Phase VSI Using the Novel SVPWM Strategy

Research and Realize Variable-frequency Regulating Speed System of Motor Based on Voltage Space-vector PWM

Synchronous Periodic Frequency Modulation Based on Interleaving Technique to Reduce PWM Vibration Noise

Analysis and Performance of Five-Phase Piecewise-Random-Switching-Frequency Space Vector Pulse Width Modulation

A Passive Variable Switching Frequency SPWM Concept and Analysis for DCAC Converter

Modified Single-Edge SVPWM Technique to Reduce the Switching Losses and Increase PWM Harmonics Frequency for Three-Phase VSIs

Hybrid Periodic Carrier Frequency Modulation Technique Based on Modified SVPWM to Reduce the PWM Noise

Frequency-Adaptive Virtual Flux Estimator-Based Predictive Power Control With Suppression of Dc Voltage Ripples Under Unbalanced Network

Synchronous Random Switching Frequency Modulation Technique Based on the Carrier Phase Shift to Reduce the PWM Noise

Hybrid Space Vector Modulation Strategy for Torque Ripple Minimization in Three-Phase Four-Switch Inverter-Fed PMSM Drives

Model Predictive Virtual Flux Control Method for Low Switching Loss Performance in Three-Phase AC/DC Pulse-width-Modulated Converters

An Advanced Modulation Technique Featuring Neutral Point Voltage Ripple Suppression of Three-Level Converters in High-Speed Drives

High‐frequency Pulse Width Modulation Noise Reduction for Permanent Magnet Synchronous Motors Using Hybrid Asymmetrical Regular Sampled Modified Space‐vector Pulse Width Modulation