Abstract:Abstract Aluminum can enhance heat release of energetic composite in theory. However, the commonly used micron aluminum powder has several short comings like incomplete reaction and low reaction rate. Meanwhile, outer oxide shell of nano Al particle is thicker than micro Al, which leads to low active aluminum content and insufficient heat release. On the basis of previous research, reported fluoropolymers modified Al particles were compared and suitable F2311was chosen. Sub-micron scale Al (median particle size around 200 nm) was regarded as optimum coated object in consideration of activity content of aluminum powder changing with particle size. The super fine Al powder was prepared by electrical explosion method, and encapsulated in situ by selected fluorine rubber F2311. The experiments on thermal stability demonstrated F2311 coating thickness should be no less than 3.6 nm. These results were further confirmed by EXPLO5 thermo dynamic calculation. Calculated results showed that reaction characters of F2311 encapsulated Al exceeded conventional nano Al regardless of combustion and explosion. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), laser particle size analyzer and X-ray photoelectron spectroscopy (XPS) were used to characterize coated products’ morphology, particle size distribution and interfacial bonding information. The results showed that the coated samples were generally spherical shape, with median particle size of 217.7 nm and coating thickness of 3.6 nm. The coating shell contained a small amount of alumina and aluminum fluoride besides fluoropolymer. The non-isothermal dynamic equations of Al/F2311 and Al/Al 2 O 3 were deduced by TG/DSC simultaneous thermal analysis. Compared with conventional nano-Al, the apparent activation energy of Al/F2311 decreased by 45 kJ/mol and the first exothermic peak temperature was about 10 °C earlier. Moreover, heat release was nearly twice as conventional nano-Al. TG-DSC-MS coupled measurements certified that active Al was enveloped by ‘fluorine atmosphere’ while F2311 decomposed in range of 200–400 °C. Alumina was replaced with aluminum fluoride inside coating layer during 400–550 °C, which broadened the diffusion path and then accelerated the permeation of oxidizing gas. In addition, the exothermic of Al-F was obviously larger than Al-O. Consequently, the oxidation reaction was activated rapidly, especially in initial exothermic period. Fluoropolymer encapsulated sub-micron sized Al was a latent highly activity energetic fuel and a potential candidate for aluminum powder.

The Effect of Alumina As an Interfacial Layer on the Reactivity of Al/PTFE Energetic Composites

The Effects of Fluoropolymers with Optimized Contents on Reactivity and Combustion Behavior of Al/MxOy Nanocomposites

THERMAL REACTIVITY OF AL/FE CORE−SHELL NANOCOMPOSITES

Influence of ceramic particles as additive on the mechanical response and reactive properties of Al/PTFE reactive composites

Tuning the Reactivity of Metastable Intermixed Composite N-Al/ptfe by Polydopamine Interfacial Control.

Mechanical Properties, Impact Initiation Characteristics and Energy Release Effect of Al/PTFE Reactive Materials Enhanced by Fe Particles

Reactivity and reaction mechanism of Al-PTFE mechanically activated energetic composites

Construction of Al@Ptfe Composites with Excellent Ignition and Combustion Properties Through Mechanical and Thermal Activation

Anti-sintering behavior and combustion process of aluminum nano particles coated with PTFE: A molecular dynamics study

A latent highly activity energetic fuel: thermal stability and interfacial reaction kinetics of selected fluoropolymer encapsulated sub-micron sized Al particles

Preparation of Al@FTCS/P(VDF-HFP) Composite Energetic Materials and Their Reaction Properties

Investigation On The Thermal Behavior, Mechanical Properties And Reaction Characteristics Of Al-Ptfe Composites Enhanced By Ni Particle

Combustion characteristics of Al/PTFE materials with different microstructures

Reactivity Tuning of Metastable Intermolecular Composite Al/PFOA by Polydopamine Interfacial Control

Exploring the Interfacial Reaction of Nano Al/CuO Energetic Films through Thermal Analysis and Ab Initio Molecular Dynamics Simulation

Tuning the Reactivity of Perfluoropolyether-Functionalized Aluminum Nanoparticles by the Reaction Interface Fuel-Oxidizer Ratio

Ptfe-modified Al Through Bridging Approach to Enhance Combustion Reaction and Energetic Performance

Effects of three types of additives on mechanical properties and impact energy release characteristics of Al/PTFE reactive structural material

Effects of Al and W Particle Size on Combustion Characteristics and Dynamic Response of W-PTFE-Al Composites

An approach to the induced reaction mechanism of the combustion of the nano-Al/PVDF composite particles

The effect of alumina nanoparticles on the thermal properties of PMMA: a molecular dynamics simulation