Abstract:Due to the complexity of construction sequence and the extended duration required to construct super large section tunnels, the selection of excavation method critically influences the stability of the surrounding rock and support structures. In this work, the Xiaoyuan Tunnel project in Jiangxi Province serves as the research background for employing ABAQUS software to simulate the variations in displacement and stress within the rock and support structures under three different excavation methods. The simulated results are subsequently compared and verified against monitoring data. The findings indicate that the three-benching seven-step method releases more stress (maximum principal stress value reaches 0.621 MPa) from the surrounding rock and support structures than the other methods, resulting in stress concentrations. Therefore, it is of vital significance to complete the initial support in time and seal the tunnel opening quickly. The maximum principal stress values caused by three excavation methods all appear at the arch foot position, highlighting the need for prompt reinforcement of stability support there. Compared to the CRD method and the three-benching seven-step method, the tunnel vault’s settlement value caused by the double-side drift method is reduced by 14% and 19%, respectively. Furthermore, the largest disturbance of the surrounding rock occurs under the CRD method, while the double-side drift method minimizes such disturbances, making it the preferred choice for the construction of super large section tunnels. These insights are invaluable for guiding the selection and optimization of construction methods for such tunnels.

STUDY ON THE APPLICATION OF RETRACTABLE STEEL ARCH FRAME IN TUNNEL MINING METHOD

Comparison Study on Stability Behavior Between Steel Pipe Arch Bridge and CFST Truss Arch Bridge

Analysis of Supporting Mechanism of Steel Arch Frame in Tunnel Collapse

Study on Bearing Mechanism and Coupling Mechanism of Steel Arch-concrete Composite Structure of Initial Support System of Large Section Tunnel

Mechanical characteristics and stability analysis of an innovative type of steel–concrete composite support in shallow-buried excavation tunnels

Study of deformation characteristics of compound support steel arch and surrounding rock stability in diversion tunnel

Experiments and Numerical Simulation of the Reinforcement Effect of Channel-Steel-reinforced Shield Tunnel Segments under Unloading Conditions

Mechanical behaviour analysis and support system field experiment of confined concrete arches

Study on the Stress and Deformation of Surrounding Rock and Support Structure of Super Large Section Tunnels Based on Different Excavation Methods

Study on Effect of Frame Structures Crossed by Shallow-Buried and Mining Tunnelling

Research on the Mechanism of Loose Deformation in Weak Fracture Zone Tunnel Surrounding Rock and Support Control

Study on Stress Characteristics of Multi-arch Tunnel Lining under Weak Surrounding Rock Conditions Based on Field Measurement

A Case Study of Tunnel Reinforcement Measure during Traffic Upgrading in Chongqing City, China

Design and application of a prefabricated structure for large-span arch open-cut highway tunnels

Numerical Simulation Analysis on the Supporting Effect of Different Pre-reinforcement Methods in Portal Section of the Shallow Buried Soft Rock Tunnel

Mechanism Research of a New Constant Resistance Yielding Device for Tunnels

Bearing effect of arched frame structures with longitudinal connections in large-section tunnels

On Asymmetric Failure Characteristics of Tunnels and Surrounding Rock Control Techniques Under Close‐Distance Repeated Coal Mining

Theoretical study of bearing capacity calculation model for multi-segment confined concrete arch and design method in underground engineering

Study on the mechanical properties of prefabricated assembled cover arch reinforcements in tunnels

Analysis of Arch Forming Factors of Shallow Buried Hard Rock Tunnel under Overlying Load