Abstract:To date, more than fifty articles have been published on the feasibility studies of zinc and its alloys as biodegradable metals. These preliminary in vitro and in vivo studies showed acceptable biodegradability and reasonable biocompatibility in bone and blood microenvironments for the experimental Zn-based biodegradable metals and, for some alloy systems, superior mechanical performance over Mg-based biodegradable metals. For instance, the Zn-Li alloys exhibited higher UTS (UTS), and the Zn-Mn alloys exhibited higher elongation (more than 100%). On the one hand, similar to Mg-based biodegradable metals, insufficient strength and ductility, as well as relatively low fatigue strength, may lead to premature failure of medical devices. On the other hand, owing to the low melting point of the element Zn, several new uncertainties with regard to the mechanical properties of biomedical zinc alloys, including low creep resistance, high susceptibility to natural aging, and static recrystallization (SRX), may lead to device failure during storage at room temperature and usage at body temperature. This paper comprehensively reviews studies on these mechanical aspects of industrial Zn and Zn alloys in the last century and biomedical Zn and Zn alloys in this century. The challenges for the future design of biomedical zinc alloys as biodegradable metals to guarantee 100% mechanical compatibility are pointed out, and this will guide the mechanical property design of Zn-based biodegradable metals. STATEMENT OF SIGNIFICANCE: Previous studies on mechanical properties of industrial Zn and Zn alloys in the last century and biomedical Zn and Zn alloys in this century are comprehensively reviewed herein. The challenges for the future design of zinc-based biodegradable materials considering mechanical compatibility are pointed out. Common considerations such as strength, ductility, and fatigue behaviors are covered together with special attention on several new uncertainties including low creep resistance, high susceptibility to natural aging, and static recrystallization (SRX). These new uncertainties, which are not significantly observed in Mg-based and Fe-based materials, are largely due to the low melting point of the element Zn and may lead to device failure during storage at room temperature and clinical usage at body temperature. Future studies are urgently needed on these topics.

Research Progress on Biocompatibility Evaluation of Biomedical Degradable Zinc Alloys

A Comprehensive Review of the Current Research Status of Biodegradable Zinc Alloys and Composites for Biomedical Applications

A Critical Review of Biodegradable Zinc Alloys toward Clinical Applications

Challenges in the use of zinc and its alloys as biodegradable metals: Perspective from biomechanical compatibility

Research status and future prospects of biodegradable Zn-Mg alloys

Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives

Research progress in biodegradable Zn-based materials for orthopedic applications

[Research status and development of biodegradable zinc alloy as orthopedics implant].

In Vitro Evaluation of the Feasibility of Commercial Zn Alloys As Biodegradable Metals

Advances on biodegradable zinc-silver-based alloys for biomedical applications

Surface Modification on Biodegradable Zinc Alloys

Biodegradable Zn–Sr alloys with enhanced mechanical and biocompatibility for biomedical applications

A review on current research status of the surface modification of Zn-based biodegradable metals.

Recent Developments in Zn-Based Biodegradable Materials for Biomedical Applications

Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr

A Study of Degradation Behaviour and Biocompatibility of Zn-Fe Alloy Prepared by Electrodeposition.

Opportunities and challenges of biodegradable Zn-based alloys

Design and characterizations of novel biodegradable Zn-Cu-Mg alloys for potential biodegradable implants

Microstructure, Mechanical Properties and in Vitro Degradation Behavior of Novel Zn-Cu-Fe Alloys

The Prospects of Zinc as a Structural Material for Biodegradable Implants—A Review Paper

Impact of copper on corrosion behavior, biocompatibility and antibaterial activity of biodegradable Zn-3Mg-xCu alloys for orthopedic applications