Abstract:Electroaerodynamic (EAD) devices, which produce a propulsive force in air by electrostatic acceleration, have been demonstrated as a method of propulsion for airplanes. However, achieving sufficient thrust-to-power is a significant challenge in developing EAD aircraft which are practical. Theory predicts that devices with larger inter-electrode gap spacing will enable higher thrust-to-power, but most experimental work has been limited to gap spacings of less than 80 mm. Those studies which have investigated spacings of greater than 100 mm have found results deviating from theory, with lower thrust-to-power than predicted. We performed experiments between 50 and 300 mm gap spacing and conclude that three effects explain the discrepancy: 'leakage current' from the electrodes to the surroundings, which does not produce thrust but increases measured electrical power; reverse corona emission from the collecting electrode, which reduces thrust and increases power; and the electric potential of the thruster relative to its surroundings, which affects both leakage current and reverse corona emission. Our results show that if these effects are accounted for, the existing EAD theory is correct without modification beyond its previous range of validity and is applicable to wire-to-cylinder EAD devices up to at least 300 mm gap spacing. We support our experimental results with two-dimensional numerical simulations, which show that the experimental current and thrust, including effects of leakage current, can be reproduced by computation with 12% error—an important step towards numerical design and optimization. By experimentally replicating equilibrium in-flight conditions, we measure thrust-to-power in the laboratory of up to 15 N kW<sup>−1</sup> for large gap spacing thrusters at practically useful thrust levels. This is two to three times higher than current implementations with smaller gap spacings, suggesting that large gap spacing thrusters will be suitable for future EAD-propelled flight applications at thrust-to-power competitive with or exceeding conventional propulsion.

Research on Characteristics of Decoupled Electroaerodynamic Thruster with Auxiliary Electrode

Performance of decoupled electroaerodynamic thrusters

Research on Characteristics of Dual-Frequency Coupling Electroaerodynamic Thruster

Discharge Characteristics and System Performance of the Ablative Pulsed Plasma Thruster with Different Structural Parameters

Optimization of Plasma Plume Characteristics Based on Multi-anode Coaxial Ablative Pulsed Plasma Thruster

The mechanism of multi-anode electrode geometry applied to vacuum arc thruster

Research of Influence of the Additional Electrode on Hall Thruster Plume by Particle-in-cell Simulation

Effect of Relative Position Between Cathode and Magnetic Separatrix on the Discharge Characteristic of Hall Thrusters

Performance Study of Pulsed Plasma Thruster Using a New Kind of Electrode

Optimization of a Long-Lifetime Hall Thruster with an Internally Mounted Cathode

Influence of Different Energy Supply Methods on Performance of Ablative Pulsed Plasma Thrusters

Order-of-Magnitude Improvement in Electroaerodynamic Thrust Density with Multistaged Ducted Thrusters

A study of an air-breathing electrodeless plasma thruster discharge

Effect of Double-Stage Discharge on the Performance of A Multi-Mode Hall Thruster

The Effect of Electrically Pre-Stressing of High DC Electric Field on Performance of SDBD Thruster in Near Space

Diagnostic and Modelling Investigation on the Ion Acceleration and Plasma Throttling Effects in a Dualemitter Hollow Cathode Micro-Thruster

Higher thrust-to-power with large electrode gap spacing electroaerodynamic devices for aircraft propulsion

Plastic film based lightweight thruster driven by triboelectric nanogenerator for multi-purpose propulsion applications

Effect of Magnetic-Field Intensity Near an Intermediate Electrode on the Discharge Characteristics of a Hall Thruster with a Double-Peaked Magnetic Field

Study on the Improvement of Theoretical and Electric Field Simulation Methods for the Accurate Prediction of FEEP Thruster Performance

Influence of acceleration stage electrode voltage on the performance of double-stage Hall effect thruster with adjustable zero magnetic point