Abstract:An experimental study was conducted to evaluate the ductility of reinforced concrete beams longitudinally reinforced with hybrid Fiber Reinforced Polymer (FRP)–steel bars. The specimens were fourteen reinforced concrete beams with and without hybrid reinforcement. The test variables were bar positions, ratio of longitudinal reinforcement, and type of FRP. The beams were loaded until failure using a four-point bending test. The performance of the tested beams was observed using the load–deflection curve obtained from the test. Numerical analysis using the fiber element model was carried out to examine the growth of neutral axis due to the effects of the test variables. The neutral axis curves were then used to estimate the neutral axis angles and displacement indices. The test results showed that the reinforcement position did not significantly affect the flexural capacity of beams with a higher ratio of hybrid reinforcement, but was quite significant in beams with a lower ratio of hybrid reinforcement. It was observed from the test that the flexural capacity of beams with hybrid reinforcement was 15–45% higher than that of beams with conventional steel bars, depending on bar positions and the ratio of longitudinal reinforcement. The ductility of beams with hybrid reinforcement was significantly increased compared to that of beams with FRP, but decreased as the hybrid reinforcement ratio (Af/As) increased. This study also showed that the developed numerical model could predict the flexural behavior of beams with hybrid reinforcement with reasonable accuracy. Based on the test results, parametric analysis, and data obtained from the literature, the use of the neutral axis angle and displacement index value to evaluate the ductility of cross-sections with hybrid reinforcement is proposed.

Design Provisions for Flexural Strength of Hybrid Reinforced Concrete Beams with Fiber-Reinforced Polymer and Steel Bars

Flexural Strength Design of Hybrid FRP-Steel Reinforced Concrete Beams

Ultimate Strength of Reinforced Concrete Beams Retrofitted with Hybrid Bonded Fiber-Reinforced Polymer

Strength reduction factor based on probabilistic analysis for hybrid reinforced concrete beams

Effect of Reinforcement Ratio on the Flexural Performance of Hybrid FRP Reinforced Concrete Beams

Finite element analysis of ductility and flexural capacity of FRP and steel bars hybrid reinforced concrete beams

Flexural property and design method evaluation of BFRP and steel bars hybrid reinforced concrete beams

A Design Proposal for Concrete Cover Separation in Beams Strengthened by Various Externally Bonded Tension Reinforcements

A New Flexural Strength Model of CFRP-strengthened RC Beams with Intermediate Crack Induced Debonding Failure

Reliability-Based Evaluation of Flexural Members Strengthened with Externally Bonded Fiber-Reinforced Polymer Composites

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Experimental research on the flexural behavior of Basalt fiber‐reinforced polymer (BFRP) and steel bars hybrid reinforced concrete beams

Study on the deformation of hybrid BFRP-steel reinforced concrete beams considering crack development

Ductility Estimation for Flexural Concrete Beams Longitudinally Reinforced with Hybrid FRP–Steel Bars

Flexural behavior of RC continuous beams having hybrid reinforcement of steel and GFRP bars

Prediction of Structural Behavior of Continuous Reinforced Concrete Beams with Hybrid CFRP-Steel Bars

Flexural Behavior of Reinforced Concrete Beams Strengthened with Hybrid Carbon-Pet FRP Laminates

Experimental study of hybrid FRP reinforced concrete beams

Effect of Fiber Volume Ratio on Flexural Behavior of RC Beam with Novel HFRP Rebar and Steel Rebar

Post-yielding deflection calculation of flexural hybrid reinforced concrete with a combination of fiber reinforced polymer and steel bars

Reliability evaluation of flexural capacity design provision for UHPC beams reinforced with steel rebars/prestressing tendons