Abstract:A medium-power, highly-efficient broadband linear power amplifier (PA) is designed in a 40-nm GaN technology that covers the key 5G FR2 band of 24–40 GHz. Load-pull simulations suggest better device broadband performance and peak power-added-efficiency (PAE) around <inline-formula> <tex-math notation="LaTeX">$V_{\text {DD}} =4$ </tex-math></inline-formula>–6 V. Measurement data corroborates the simulations and this PA achieves a small-signal 3-dB bandwidth (BW) of 18.0–40.3 GHz, with max. PAE/<inline-formula> <tex-math notation="LaTeX">$P_{\text {SAT}}$ </tex-math></inline-formula> of 42.1%/18.6 dBm at 28 GHz, and 26.0%/17.2 dBm at 38 GHz at <inline-formula> <tex-math notation="LaTeX">$V_{\text {DD}} = 4$ </tex-math></inline-formula> V. When tested with a 9 MHz <inline-formula> <tex-math notation="LaTeX">$\times \,\, 100$ </tex-math></inline-formula> MHz 256-quadratic-amplitude modulation (QAM) 5G new radio (NR) signal, it achieves an adjacent-channel-leakage-ratio (ACLR) of −27 dBc with <inline-formula> <tex-math notation="LaTeX">$P_{\text {OUT, AVG}}$ </tex-math></inline-formula>/PAE of 11.3 dBm/13.9% at 28 GHz. When compared with state-of-the-art broadband PAs, it achieves the best <inline-formula> <tex-math notation="LaTeX">$S_{21}~3$ </tex-math></inline-formula>-dB BW with excellent peak PAE and linearity. This work also reports the best PAE for broadband medium-power millimeter-wave GaN PA at <inline-formula> <tex-math notation="LaTeX">$P_{\text {SAT}}~\sim 20$ </tex-math></inline-formula> dBm.

A Mm-Wave Parallel-Combined Power Amplifier Supporting Balanced/Unbalanced Mode for 5G NR FR2 Applications

A 30Mhz-3Ghz 1W Stacked-Fet GaAs MMIC Power Amplifier.

Design and Analysis of a 26–34.5-Ghz Power Amplifier with Balanced Mismatch Reduction and Interstage Matching

A W-band current combined power amplifier with 14.8dBm Psat and 9.4% maximum PAE in 65nm CMOS

A Compact 19.7-to 43.8-Ghz Power Amplifier with 20.3-Dbm $p_{\mathrm{sat}}$ and 35.5% PAE in 28-Nm Bulk CMOS

25.2 A 19.7-to-43.8ghz Power Amplifier with Broadband Linearization Technique in 28nm Bulk CMOS

A 15.6 Dbm P, 24 Db Gain, 24.4%PAE, Linear CMOS Power Amplifier for 5G Application

32.8 A 27.8-to-38.7GHz Load-Modulated Balanced Power Amplifier with Scalable 7-to-1 Load-Modulated Power-Combine Network Achieving 27.2dBm Output Power and 28.8%/23.2%/16.3%/11.9% Peak/6/9/12dB Back-Off Efficiency.

An 8-way series-parallel combiner based power amplifier for mm-wave 5G communication in 40-nm CMOS

A Dual-Band GaN MMIC Power Amplifier with Hybrid Operating Modes for 5G Application

A 1V 32.1 dBm 92-to-102GHz Power Amplifier with a Scalable 128-to-1 Power Combiner Achieving 15% Peak PAE in a 65nm Bulk CMOS Process.

A Tri-Mode Filtering Power Amplifier for 5G Millimeter-Wave Dual-Side LO Injection Systems with Power-Efficiency Enhancement

A 2.5 Watt 2.6 GHz HBT Power Amplifier Using Transformer-Based Matching Networks

A 57-64 GHz Two-Way Parallel-Combined Power Amplifier with 16.6 dBm Psat and 23.6% Peak PAE in 40nm Bulk CMOS

A 28-GHz CMOS Linear Power Amplifier With Low Output Phase Variation Over Dual Power Modes

A Broadband Millimeter-Wave Continuous-Mode Class-F Power Amplifier Based on the Deembedded Transistor Model

A Highly Efficient 18–40 GHz Linear Power Amplifier in 40-nm GaN for mm-Wave 5G

Efficient GaN-on-Si Power Amplifier Design Using Analytical and Numerical Optimization Methods for 24–30 GHz 5G Applications

Design of an Efficient 24–30 GHz GaN MMIC Power Amplifier Using Filter-Based Matching Networks

32.4 A 67.8-to-108.2ghz Power Amplifier with a Three-Coupled-Line-Based Complementary-Gain-Boosting Technique Achieving 442ghz GBW and 23.1% Peak PAE

A Broadband Linear Millimeter-Wave Power Amplifier with an Adaptive Bias Circuit