Abstract:To achieve high speed, flexible planar parallel manipulators (PPM) are typically designed with lightweight linkages, but hence suffer from unwanted structural vibration, diminishing positioning accuracy. To achieve high positioning accuracy, this paper addresses the vibration suppression of a PPM with three flexible linkages actuated by linear ultrasonic motors (LUSM). Based on the extended Hamilton’s principle, a rigid–flexible dynamic model of a proposed PPM is developed using the substructure approach and the assumed mode method (AMM). The assumed mode shapes of the flexible linkages are verified through the experimental modal tests. Then, two control algorithms are designed for tracking control of the end effector and vibration attenuation of the flexible linkages. The first approach is a two-timescale control based on singular perturbation principles, implemented as a joint motion control without additional actuators. The second approach is a dual-stage control method. In this control approach, a variable structural control (VSC) method is applied to realize motion tracking of the moving platform, while the strain and strain rate feedback control (SSRF) is developed to suppress the undesired vibration of the flexible linkages, using multiple distributed collocated lead zirconate titanate (PZT) transducers. Stability analysis of the two algorithms is investigated based on Lyapunov approach. Simulation results of these two approaches show that the dual-stage control method provides better vibration attenuation, and hence, faster settling time of the PPM is achieved.

Vibration Suppression and Boundary Control for Nonlinear Flexible Rotating Manipulator in Three-Dimensional Space Subject to Output Restrictions.

Random Vibration Control for Multi-Degree-of-freedom Mechanical Systems with Soft Actuators

Active Torsional Vibration Control of Flexible Manipulator

Adaptive Boundary Control for a Flexible Manipulator With State Constraints Using a Barrier Lyapunov Function

Adaptive boundary iterative learning vibration control using disturbance observers for a rigid–flexible manipulator system with distributed disturbances and input constraints

Boundary control for a constrained two-link rigid–flexible manipulator with prescribed performance

Boundary Vibration Control for a Flexible Timoshenko Robotic Manipulator

Boundary antisaturation vibration control design for a flexible Timoshenko robotic manipulator

Adaptive Neural-Network Boundary Control for a Flexible Manipulator with Input Constraints and Model Uncertainties

Boundary control of multiple-sectioned flexible marine riser with time-varying output constraint

Boundary Control Design for A Flexible Robotic Manipulator Modeled As A Timoshenko Beam

Partial differential equation modeling and vibration control for a nonlinear 3D rigid‐flexible manipulator system with actuator faults

Multiobjective Vibration Control for the Noncollocated Active Magnetic Bearings Flexible Rotor Systems

Sliding Mode Boundary Control for a Planar Two-link Rigid-flexible Manipulator with Input Disturbances

Active control of bending-torsion-coupled vibration of a space flexible manipulator

Disturbance observer‐based adaptive boundary iterative learning control for a rigid‐flexible manipulator with input backlash and endpoint constraint

Boundary Output Feedback Control for a Flexible Two-Link Manipulator System With High-Gain Observers

Trajectory Tracking and Vibration Suppression of a 3-PRR Parallel Manipulator with Flexible Links

Three-dimensional vibration suppression for an Euler–Bernoulli beam with asymmetric output constraint

Boundary Torque Control of a Flexible Two-Link Manipulator and Its Experimental Investigation

Boundary Robust Adaptive Control of a Flexible Timoshenko Manipulator