A Study on the Mechanisms and Influencing Factors of Interfacial Physicochemical Interactions Between Asphalt and Mineral Aggregates Based on Multiscale Evaluation Methods
Chang Lu,Zhengqi Zhang,Jierong Shi,Xinhong Yang,Mi Yang,Hengbin Liu,Jianhua Yang,Zhixiang Wang
DOI: https://doi.org/10.1016/j.conbuildmat.2024.138298
IF: 7.4
2024-01-01
Construction and Building Materials
Abstract:The elucidation of interfacial physicochemical mechanisms between asphalt and mineral aggregates is vital for comprehending the interface formation in asphalt mixtures and enhancing their performance. To this end, multiscale evaluation methods were used to investigate the mechanisms and influencing factors of interfacial physicochemical interactions between asphalt and mineral aggregates (IPIAMA). Initially, the dynamic shear rheometer (DSR) was used to measure the complex shear modulus (G*) of various asphalt mastics. Subsequently, the interface film thickness was calculated using G* in conjunction with the Hashin and Mori-Tanaka (MT) micromechanical models. This indicator facilitated quantitative assessments and the analysis of influencing factors. The results indicated that the MT model underestimated the interface film thickness by approximately 0.08-0.29 % compared to the Hashin model, a discrepancy attributable to assumptions regarding aggregate particle interlocking. Moreover, the interface film thickness systematically varied with factors such as aggregate content, type of aggregate, and type of asphalt, ranging from 0.24 to 0.53 mu m. To further elucidate the IPIAMA mechanisms behind these variations, the fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), and the ultraviolet test (UV) testing were conducted. FTIR tests demonstrated that the primary components of mineral aggregates-dolomite, calcite, and quartz-contributed to the physical adsorption increments on asphalt functional groups by 0.0185, 0.0509, and 0.004, respectively. SEM images revealed that dolomite and calcite possessed more surface fissures and pores than quartz. XPS tests showed that calcium carbonate and magnesium carbonate chemically reacted with asphalt, resulting in electron shifts of 0.9 eV and 1.1 eV, respectively, while silicon oxide only exhibited electron shifts when combined with a silane coupling agent-modified asphalt. UV tests demonstrated that lighter asphalt fractions were preferentially absorbed into the pores and micro-cracks of mineral aggregates. Consequently, the complex IPIAMA involved physical adsorption, chemical reactions, and selective absorption, strongly correlating with factors such as mineral composition, surface morphology, and asphalt type.