Abstract:To accurately estimate the rock shear strength parameters of cohesion (C) and friction angle (φ), triaxial tests must be carried out at different stress levels so that a failure envelope can be obtained to be linearized. However, this involves a higher budget and time requirements that are often unavailable at the early stage of a project. To address this problem, faster and more inexpensive indirect techniques such as artificial intelligence algorithms are under development. This paper first aims to utilize four machine learning techniques of Gaussian process regression (GPR), support vector regression (SVR), decision trees (DT), and long-short term memory (LSTM) to develop a predictive model to estimate parameters C and φ. To this aim, 244 datasets are available in the RockData software for intact Sandstone, including three input parameters of uniaxial compressive strength (UCS), uniaxial tensile strength (UTS), and confining stress (σ3) are employed in the models. The dropout technique is used to overcome the overfitting problem in LSTM-based models. A comprehensive evaluation is adopted for the performance indices of the prediction models. In this step, the most accurate results are produced by the LSTM model (C: R2 = 0.9842; RMSE = 1.295; MAPE = 0.009/φ: R2 = 0.8543; RMSE = 1.857; MAPE = 1.4301). In the second step, we improve the performance of the proposed LSTM model by fine-tuning the LSTM hyper-parameters, using six metaheuristic algorithms of grey wolf optimization (GWO), particle swarm optimization (PSO), social spider optimization (SSO), sine cosine algorithm (SCA), multiverse optimization (MVO), and moth flame optimization (MFO). The developed models' prediction performance for predicting parameter C from high to low was PSO-LSTM, GWO-LSTM, MVO-LSTM, MFO-LSTM, SCA-LSTM SSO-LSTM, and LSTM with ranking scores of 34, 29, 24, 21, 14, 12, and 5, respectively. Also, the models' prediction performance for predicting parameter φ from high to low was PSO-LSTM, GWO-LSTM, MVO-LSTM, MFO-LSTM, SCA-LSTM SSO-LSTM, and LSTM with ranking scores of 34, 31, 23, 18, 15, 14, and 5, respectively. However, the most robust results are produced by the PSO-LSTM model. Finally, the results indicate that applying a metaheuristic algorithm to tune the hyper-parameters of the LSTM model can significantly improve the prediction results. In the last step, the mutual information test method is applied to sensitivity analysis of the input parameters to predict parameters C and φ. Finally, it is revealed that parameters σ3 and UCS have the highest and lowest impact on the parameters C and φ, respectively.

Deep Learning for Intelligent Prediction of Rock Strength by Adopting Measurement While Drilling Data

Prediction of Uniaxial Compressive Strength in Rocks Based on Extreme Learning Machine Improved with Metaheuristic Algorithm

Prediction of Peak Shear Strength of Rock Joints Based on Back-Propagation Neural Network

Study on Rock Mechanics Parameter Prediction Method Based on DTW Similarity and Machine-Learning Algorithms

Strength prediction and drillability identification for rock based on measurement while drilling parameters

Uniaxial Compressive Strength Prediction for Rock Material in Deep Mine Using Boosting-Based Machine Learning Methods and Optimization Algorithms

Predicting Triaxial Compressive Strength of High-Temperature Treated Rock Using Machine Learning Techniques

Deep convolutional neural network for fast determination of the rock strength parameters using drilling data

Uniaxial Compressive Strength Prediction of Rocks Based on LSTM-Adaboost from Multi-Sources

New method prediction of rock mechanics parameters in drilling process based on machine learning

Rock strength prediction based on machine learning: A study from prediction model to mechanism explanation

Machine Learning Techniques to Predict Rock Strength Parameters

DNN–GA–RF Prediction Model for Rock Strength Indicators Based on Sound Level and Drilling Parameters

Dynamic Numerical Simulation and Transfer Learning-Based Rapid Rock Identification during Measurement While Drilling (MWD)

Advanced prediction for field strength parameters of rock using drilling operational data from impregnated diamond bit

Machine Learning Algorithms in Rock Strength Prediction: A Novel Method for Evaluating Dynamic Compressive Strength of Rocks Under Freeze-Thaw Cycles

A Deep Learning Method for the Prediction of the Index Mechanical Properties and Strength Parameters of Marlstone

A method for predicting uniaxial compressive strength of rock mass based on digital drilling test technology and support vector machine

Regressive and Big-Data-Based Analyses of Rock Drillability Based on Drilling Process Monitoring (DPM) Parameters

Deep Convolutional Neural Network-Based Method for Strength Parameter Prediction of Jointed Rock Mass Using Drilling Logging Data

Machine learning methods for predicting the uniaxial compressive strength of the rocks: a comparative study