Abstract:Li2MnO3 stabilizes the structure of Li M O2 ( M = Mn, Ni, Co, etc.) and makes Li-rich layer-structured xLi2MnO3·(1-x)Li M O2 (0<x<1.0, M = Mn, Ni, Co, etc.) composites (or solid solutions) become potential cathode materials for high energy density lithium ion batteries. However, as Mn4+ is inactive in Li2MnO3, the charge compensation from O2- ions during the initial delithiation and the irreversible layer-to-spinel structural transition in the subsequent lithiation makes the composite suffer from drawbacks such as low initial coulombic efficiency, discharge voltage and energy density falling, and poor rate performance during cycling as well as safety hazard in the initial cycle. Although surface modification, atomic substitution and optimization of synthesis strategies have been pursued to improve the performances of the xLi2MnO3·(1-x)Li M O2 composites, the inherent drawbacks of Li2MnO3 component have not been, and cannot, overcome. Here we introduce Li2MoO3 with disordered NaFeO2 structure (R-3m) as a prospective alternation of Li2MnO3 for designing novel Li-rich cathode materials xLi2 M ´O3·(1-x)Li M O2. In this report, the structural transition and charge compensation of Li2MoO3 during the initial charge and discharge were investigated with STEM and synchrotron in situ XRD and XAS techniques. It is shown that, during the initial delithiation, solid-solution reaction and two-phase reaction (slipped O3 → faulted O1) go in series due to charge compensation from Mo4+ ions in both the Mo-O and Mo-Mo covalent bonds in the Mo3O13 cluster accompanied with the Mo ion migration from Li-2Mo layer to Li layer. In the subsequent lithiation, its structure is recovered to a Li-insufficient O3 type Li2-x MoO3 (x = 0.50) due to the incomplete reduction of Mo6+ ions and the nearly reversible migration of the Mo ions at the end of lithiation. Unlike the irreversible oxygen release in deeply delithiated Li2MnO3, the O K-edge soft XAS of Li2MoO3 illustrates that oxidation of O2- to O(2-σ )- is nearly reversible and is required dynamically rather than thermodynamically. These features make Li2MoO3 a promising superior alternate in constructing novel Li-rich cathode material with improved structural stability and easy charge compensation. In addition, the contribution of Mo-Mo covalent bond seems to help to maintain the framework of the electrode material by hindering the loss of oxygen. Therefore, the basic findings in this work will also bring new insight on understanding the performance decay and searching for new ways to improve the performance of the conventional xLi2MnO3·(1-x)Li M O2materials. Acknowledgements This work was financially supported by the National Natural Science Foundation (No. 51372268) of China and the National 973 Program of China (2009CB 220100). The work at Brookhaven National Lab. was supported by the U.S. Department of Energy, the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technologies under Contract No. DEAC02-98CH10886.

Atomic‐Scale Revealing the Structure Distribution Between LiMO2 and Li2MnO3 in Li‐Rich and Mn‐Based Oxide Cathode Materials

Insight of reaction mechanism and anionic redox behavior for Li-rich and Mn-based oxide materials from local structure

Unveiling the mechanism of charge compensation in Li2RuxMn1−xO3 by tracking atomic structural evolution

Structural Transition and Charge Compensation During the Initial Delithiation and Lithiation of Li2MoO3

The Stability and Electronic Structures of Li2MnO3 in Highly Charged States

Oxygen vacancy in Li-rich Mn-based cathode materials: origination, influence, regulation and characterization

Understanding Lattice Oxygen Redox Behavior in Lithium‐Rich Manganese‐Based Layered Oxides for Lithium‐Ion and Lithium‐Metal Batteries from Reaction Mechanisms to Regulation Strategies

Tuning Oxygen Redox Chemistry in Li-Rich Mn-Based Layered Oxide Cathodes by Modulating Cation Arrangement.

Revealing the Thermodynamics and Kinetics of In-Plane Disordered Li 2 MnO 3 Structure in Li-Rich Cathodes

Weak σ–π–σ Interaction Stabilizes Oxygen Redox towards High-Performance Li–rich Layered Oxide Cathodes

Modulating Local Electronic Structure Enhances Superior Electrochemical Activity in Li-Rich Oxide Cathodes

Probing Structural Evolution of High-capacity Layered Oxide Cathode

Revealing the Role of Mn/Li Disordered Mixing in Li-rich Cathode Li2MnO3 by First-Principles Calculations

Local Electronic Structure Modulation Enables Fast‐Charging Capability for Li‐Rich Mn‐Based Oxides Cathodes With Reversible Anionic Redox Activity

Computational Understandings of Cation Configuration-Dependent Redox Activity and Oxygen Dimerization in Lithium-Rich Manganese-Based Layered Cathodes

Highly structural stability from small-sized Li2MnO3-like domains in Co-free Li-rich layered oxide cathodes

Exploit Li2MnO3 Activity by Two Phase Coexistence at Atomic Level Towards High Performance Mn-based Co-free Li-rich Cathodes

Cycling mechanism of Li2MnO3: Li–CO2 batteries and commonality on oxygen redox in cathode materials

High-Energy Cathode Materials (Li2mno3-Limo2) for Lithium-Ion Batteries

Insight into the Synergistic Effect Mechanism Between the Li2MO3 Phase and the LiMO2 Phase (M = Ni, Co, and Mn) in Li- and Mn-rich Layered Oxide Cathode Materials

Revealing the Electrochemical Mechanism of Cationic/Anionic Redox on Li-Rich Layered Oxides Via Controlling the Distribution of Primary Particle Size