Abstract:Metal sulfides (MSs) can efficiently entrap thiophilic components, such as elemental mercury (Hg0), and realize environmental remediation. However, there is still a critical problem challenging the extensive application of MSs in related areas, i.e., how to self-regulate their water (H2O) resistance without complexing the sorbent preparation procedure. This work for the first time developed an in situ acid-etching method that self-engineered the water affinity of MSs through changing the interfacial interaction between MSs and Hg0/H2O. The introduction of abundant, undercoordinated sulfur onto the sorbent surface was the primary reason accounting for the significantly improved H2O resistance. The high surface coverage of undercoordinated sulfur induced the formation of polysulfur chains (Sx2-) that stabilized Hg0 via a bridging bond and repelled H2O, attributed to the favorable electron configurations. These properties made the surface of MSs highly hydrophobic and increased the adsorption selectivity toward Hg0 over H2O. The MSs exhibited 100% H2O resistance even in the presence of 20% H2O, which is much higher than the H2O concentration under most practical scenarios. From these perspectives, this work for the first time overcame the detrimental effects of H2O on MSs through a self-regulating way that is scalable and negligibly complexes the sorbent preparation pathway. The highly water-resistant and cost-effective MSs as prepared can serve as efficient Hg0 removal from industrial flue gas in the future.

First-Principles Study of Hg0 Immobilization on a Defective Pyrite Surface

Structural Defects in 2D MoS2 Nanosheets and Their Roles in the Adsorption of Airborne Elemental Mercury

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Mercury Removal Mechanism of Mechanochemical Sulfur Modified Straw Coke: Density Functional Theory Calculation and Kinetic Fitting

Insight into the Elemental Mercury Immobilization Mechanism with Carbon and Sulfur over the Mackinawite (fes) Surface Via Density Functional Theory

Achieving Large-Capability Adsorption of Hg0 in Wet Scrubbing by Defect-Rich Colloidal Copper Sulfides under High-SO2 Atmosphere

Effects of sulfur‐ and Fe‐deficient defects on the decomposition of hydrogen peroxide H2O2 on pyrite surface

Self-Constructing 100% Water-Resistant Metal Sulfides through In Situ Acid Etching for Effective Elemental Mercury (Hg 0 ) Capture

Sulphur Vacancy Derived Anaerobic Hydroxyl Radical Generation at the Pyrite-Water Interface: Pollutants Removal and Pyrite Self-Oxidation Behavior

Two-dimensional WS2 as a new mercury removal material: Mercury conversion pathway and effect of defect

Adsorption of Mercury (ii) from Aqueous Solutions Using Fes and Pyrite: A Comparative Study

Influence of pyrite surface defects on xanthate adsorption: A density functional theory perspective

Sulfur Dioxide Promoted Mercury Fast Deposition over a Selenite-Chloride-Induced Surface from Wet Flue Gas.

Research On The Effect Of Carbon Defects On The Hydrophilicity Of Coal Pyrite Surface From The Insight Of Quantum Chemistry

Immobilization of elemental mercury in non-ferrous metal smelting gas using ZnSe1−xSx nanoparticles

Insight into the Interfacial Stability and Reaction Mechanism Between Gaseous Mercury and Chalcogen-Based Sorbents in SO2-containing Flue Gas.

Theoretical exploration of the interaction between hydrogen and pyrite-type FeS2 surfaces

DFT Study on the Influence of Sulfur on the Hydrophobicity of Pyrite Surfaces in the Process of Oxidation

Gaseous Mercury Capture Using Supported CuSx on Layered Double Hydroxides from SO2-rich Flue Gas

Mercury Forms and Their Transformation in Pyrite under Weathering

Unrefined low-grade pyrolusite for elemental mercury removal from flue gas: Experimental and DFT insights