Abstract:In the development of advanced steel, accurate and detailed knowledge about the kinetics of phase transformations and microstructure formation is critical. The critical issue in pearlite-austenite transformation is the consideration of diffusional paths of the alloy element. Simulation has been an available method to study the diffusion of alloy elements and the migration rate of the phase boundary in the complex morphological evolution of austenite growth. The isothermal pearlite-austenite transformations at 720 and 740 degrees C in Fe-0.6%C-2%Mn (mass fraction) alloy were studied by phase-field methods based on MICRESS. At different temperatures, the effects of diffusional paths on the austenite transformation were discussed. To achieve a semiquantitative verification of the simulated results, the migration rates of the austenite/pearlite boundary at 720 and 740 degrees C were estimated from the experimental kinetics curves by fitting the JMA equation. By measuring the Mn profile in austenite, the modes of the austenization at 720 and 740 degrees C can be verified as partitioned local equilibrium (PLE) and non-partitioned local equilibrium (NPLE) modes. The heterogeneous distribution of Mn in austenite at 740 degrees C can be observed with STEM-EDS. However, the homogenous distribution of Mn can be found near the pearlite/austenite boundary in austenite at 720 degrees C. The cases considering the gamma, alpha, and interface-diffusional paths were simulated by phase-field methods to compare with the migration rates of the austenite/pearlite boundary. Because carbon is an interstitial element in steel and has an interstitial diffusional mechanism, it can be speculated reasonably that the diffusion of C mainly proceeded in austenite and ferrite through the considerations of the atom-size of carbon and the experimental results. Phase-field methods were used to study Mn diffusion in the lamellar pearlite-austenite transformation. With the analysis of the experimental estimations, the interface-diffusional path was observed as the dominant path for the Mn diffusion. It is because the Mn atoms have greater diffusivity in interfaces than in gamma or alpha-diffusional paths. Furthermore, the diffusional activation energy is closely related to the diffusivity of Mn at the interface. Moreover, compared with the gamma-diffusional path, the diffusional flux of Mn in ferrite is much larger than that in austenite. Thus, it can be concluded that the contribution of the alpha-diffusional path to the migration rate of the pearlite/austenite boundary is larger than that of the gamma-diffusional path. As a result, considering the alpha-diffusional path in the thermodynamics analysis under NPLE mode makes more sense. However, ignoring the interface- and alpha-diffusional path, which is different from the traditional cognition in PLE mode, will result in a magnitude error for the thermodynamics analysis.

The Role of Interfacial Coherency in the Kinetics of Austenite to Ferrite Transformation in Fe-C-M Alloys: A Phase Field Study

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Phase Field Simulation of Multiple Phase Transformation of Fe-C Alloy During Solidification Process

A New Kinetic Mode During the Austenite-to-Ferrite Transformation in Fe–Mn and Fe–Mn–Mo Alloys

A New Kinetic Mode During the Austenite - to-Ferrite Transformation in Fe–Mn and Fe–Mn–Mo Alloys

Phase Field Simulation of Liquid-Solid-eutectoid Multiple Phase Transformations of a Fe-C Binary Alloy

Phase field simulation of nucleation of solid-solid phase transformation in multiple phase transition

Phase Field Study of the Diffusional Paths in Pearlite-Austenite Transformation

Simulation of Isothermal Solidification of Multi-Component Alloys with Phase-Field Method

The Study of Widmanstätten Ferrite in Fe–C Alloys by a Phase Field Model Coupled with Anisotropic Elasticity

Phase-field Simulation of Effect of Phase-field Parameters on Solidification Process of Multicomponent Alloys

Computation of Phase Fractions in Austenite Transformation with the Dilation Curve for Various Cooling Regimens in Continuous Casting

Atomistically Informed Phase Field Modeling of Solid-Solid Phase Transformations

Phase-field investigation on the peritectic transition in Fe-C system

Austenite/Ferrite Interface Migration and Alloying Elements Partitioning: an Overview

A Comparative Study on Intrinsic Mobility of Incoherent and Semicoherent Interfaces During the Austenite to Ferrite Transformation

Phase Field Modeling of Cyclic Austenite-Ferrite Transformations in Fe-C-Mn Alloys

Phase Field Study of Concurrent Nucleation and Growth in A Diffusion-Controlled Solid-State Phase Transformation

Phase-field Study for the Influence of Solute Interactions on Solidification Process in Multicomponent Alloys

Phase-Field Modeling of Kinetics of Diffusive Phase Transformation in Compositionally-Graded Ni-Based Superalloys

Determination of phase transformation kinetics under magnetic fields: Modeling based on magnetization and application in a Fe-1 wt.%Cu alloy