Abstract:Microbial electrosynthesis (MES) is an emerging technology for CO2 fixation and renewable energy storage. Currently, the low current density hinders the practical application of this technology. In situ coupling of electrochemical hydrogen production, and hydrogen gas fermentation has been proposed as a promising way to enhance the current density of MES. However, due to the low solubility of hydrogen, how to ensure a high coulombic efficiency (i.e. hydrogen utilization efficiency) under high current density is the main challenge for this type of reactor. Here, we report a novel electrolytic-hydrogen-fed moving bed biofilm reactor (electroMBBR) reactor for methane production. The reactor consists of an electrochemical cell at the bottom and an MBBR column at the top. The MBBR column prolongs the retention time of the electrolytically-produced hydrogen and enhances the mass transfer of hydrogen. Consequently, the methanogens in the reactor could efficiently convert the electrolytically-produced hydrogen and the externally-supplied CO2 into methane. The 4.5 L reactor achieved a maximum methane production rate of 1.42 L center dot L-1 center dot d-1 (141.5 L center dot m- 2cat center dot d- 1) at 5 A (111.1 A center dot m- 2cat). The CH4 production rate is more than two times higher than the maximum reported value based on biofilm-driven MES (0.54 L center dot L-1 center dot d-1, 65 L center dot m- 2cat center dot d-1). Microbial community analysis showed that the Methanobrevibacter was the dominant methane-producing archaea. These results demonstrated under high current density high coulombic efficiency could be achieved if proper hydrogen retention time and good hydrogen mass transfer were ensured in hydrogen-mediated MES reactors. The electro-MBBR appears to be a promising MES setup for scaling up and practical application.

3D-Printed GA/PPy Aerogel Biocathode Enables Efficient Methane Production in Microbial Electrosynthesis

A three-dimensional phenolic-based carbon anode for microbial electrochemical system with customized macroscopic pore structure to promote interior bacteria colonization.

3D‐Printed Methane‐Producing Electrodes for Microbial Fuel Cells Developed Using Biogel Ink Containing Live Methanogens and White Charcoal

Efficient Hydrogen Delivery for Microbial Electrosynthesis via 3D-Printed Cathodes

Enhanced microbial electrosynthesis performance with 3-D algal electrodes under high CO2 sparging: Superior biofilm stability and biocathode-plankton interactions

Nano zero-valent iron functioned 3D printing graphene aerogel electrode for efficient solar-driven biocatalytic methane production

Efficient Methane Production from Beer Wastewater in a Membraneless Microbial Electrolysis Cell with a Stacked Cathode: the Effect of the Cathode/Anode Ratio on Bioenergy Recovery

GO/PEDOT modified biocathodes promoting CO2 reduction to CH4 in microbial electrosynthesis

3D Macroporous Nitrogen‐Enriched Graphitic Carbon Scaffold for Efficient Bioelectricity Generation in Microbial Fuel Cells

Magnetic assembling GO/Fe3O4/microbes as hybridized biofilms for enhanced methane production in microbial electrosynthesis

Biochar based cathode enriched with hydroxyapatite and Cu nanoparticles boosting electromethanogenesis

Enhancing CH 4 production in microbial electrolysis cells: Optimizing electric field via carbon cathode resistivity

Optimization of a Newly Developed Electromethanogenesis for the Highest Record of Methane Production

An electrolytic-hydrogen-fed moving bed biofilm reactor for efficient microbial electrosynthesis of methane from CO2

Structure design of 3D hierarchical porous anode for high performance microbial fuel cells: From macro-to micro-scale

Three-dimensional amino modification carbon nanotubes/graphene composite aerogel anode enhanced Geobacter enrichment and performance in microbial electrochemical systems

Enhanced methane production in an up-flow microbial electrolysis assisted reactors: Hydrodynamics characteristics and electron balance under different spatial distributions of bioelectrodes

Upgrading algae waste into 3-D bio-cathode to enhance acetate synthesis by microbial electrosynthesis

Hydrophilic Graphene Aerogel Anodes Enhance the Performance of Microbial Electrochemical Systems.

Strengthening H2 Gas–liquid Mass Transfer Using Superaerophobic Cathodes for Enhanced Methane Production from CO2 in H2-mediated Microbial Electrosynthesis System

A 3d Hybrid Of Layered Mos2/Nitrogen-Doped Graphene Nanosheet Aerogels: An Effective Catalyst For Hydrogen Evolution In Microbial Electrolysis Cells