Abstract:Purpose In recent years, owing to the rapidly increasing labor costs, the demand for robots in daily services and industrial operations has been increased significantly. For further applications and human–robot interaction in an unstructured open environment, fast and accurate tracking and strong disturbance rejection ability are required. However, utilizing a conventional controller can make it difficult for the robot to meet these demands, and when a robot is required to perform at a high-speed and large range of motion, conventional controllers may not perform effectively or even lead to the instability. Design/methodology/approach The main idea is to develop the control law by combining the SMC feedback with the ADRC control architecture to improve the robustness and control quality of a conventional SMC controller. The problem is formulated and solved in the framework of ADRC. For better estimation and control performance, a generalized proportional integral observer (GPIO) technique is employed to estimate and compensate for unmodeled dynamics and other unknown time-varying disturbances. And benefiting from the usage of GPIO, a new SMC law can be designed by synthesizing the estimation and its history. Findings The employed methodology introduced a significant improvement in handling the uncertainties of the system parameters without compromising the nominal system control quality and intuitiveness of the conventional ADRC design. First, the proposed method combines the advantages of the ADRC and SMC method, which achieved the best tracking performance among these controllers. Second, the proposed controller is sufficiently robust to various disturbances and results in smaller tracking errors. Third, the proposed control method is insensitive to control parameters which indicates a good application potential. Originality/value High-performance robot tracking control is the basis for further robot applications in open environments and human–robot interfaces, which require high tracking accuracy and strong disturbance rejection. However, both the varied dynamics of the system and rapidly changing nonlinear coupling characteristic significantly increase the control difficulty. The proposed method gives a new replacement of PID controller in robot systems, which does not require an accurate dynamic system model, is insensitive to control parameters and can perform promisingly for response rapidity and steady-state accuracy, as well as in the presence of strong unknown disturbances.

A Modified Active Disturbance Rejection Control Method for the Compliance Control of the Flexible Joint Robots.

Compliance Control for Standing Maintenance of Humanoid Robots under Unknown External Disturbances.

An adaptive compliance position control based on EKF for series elastic actuation

A practical study of active disturbance rejection control for rotary flexible joint robot manipulator

Active Disturbance Rejection Control of Hydraulic Quadruped Robots Rotary Joints for Improved Impact Resistance

Impedance Control of Collaborative Robots Based on Joint Torque Servo with Active Disturbance Rejection.

A Position Control Based on Active Disturbance Rejection Controller Considering Parameter Variations of Harmonic Drive Gear Systems

Disturbance Observer-based Neural Network Integral Sliding Mode Control for a Constrained Flexible Joint Robotic Manipulator

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Fully-Actuated System Approach-Based Dynamic Event-Triggered Control With Guaranteed Transient Performance of Flexible-Joint Robot: Experiment

Design of Robust Terminal Sliding Mode Control for Underactuated Flexible Joint Robot

Active disturbance rejection sliding mode control for robot manipulation

Joint Torque Control of a Collaborative Robot Based on Active Disturbance Rejection with the Consideration of Actuator Delay

Finite-time disturbance observer-based trajectory tracking control for flexible-joint robots

Observer-Based Finite-Time Prescribed Performance Sliding Mode Control of Dual-Motor Joints-Driven Robotic Manipulators with Uncertainties and Disturbances

Compliance Control for Robot Manipulation in Contact with a Varied Environment Based on a New Joint Torque Controller

Active disturbance rejection control of flexible industrial manipulator: A MIMO benchmark problem

Decentralized Robust Control of Uncertain Robots with Backlash and Flexibility at Joints

Practical Prescribed Tracking Control of n-DOF Robotic Manipulator with Uncertainties via Friction Compensation Approach

Self-adaptive Composite Control for Flexible Joint Robot Based on RBF Neural Network

Robust tracking control of flexible manipulators using hybrid backstepping/nonlinear reduced-order active disturbance rejection control