Abstract:Thermal, mechanical and tribological properties of carbon fabric/resin laminated composites containing carbon fiber powder with different densities. Carbon fabric/resin laminated composites (CFRC) are extensively used in aerospace, transportation, and other fields owing to their superiorities of lightweight, high strength, and convenient integral molding. Therefore, strong interlaminar binding and prominent wear resistance are urgent requirements for avoiding premature failure of laminated materials in harsh working environments. To elevate the superficial wear resistance and interlaminar bonding strength of composites simultaneously, the modified composites were obtained by introducing carbon fiber powder (CFP) with different densities on the surface of the composites and between layers. The experimental results indicate that CFP can be evenly distributed in the interlaminar resin enrichment zone of the sample (CFRC‐40) when the deposition density is 40 g/m2. Consequently, CFRC‐40 presents optimal thermal conductivity owing to better heat transfer bridges between layers of the composite established by CFP. At the same time, the mechanical properties such as the tensile, impact, and interlaminar shear strengths of CFRC‐40 are improved by 42.8%, 10.2%, and 8.5%, respectively, compared with the original CFRC, which are attributed to the absorption of crack propagation energy and the inhibition of crack propagation by CFP. Furthermore, the dynamic friction coefficient maintains at a high level after introducing CFP with a density of 40 g/m2, while the wear rate significantly decreases by 61.2% from 12.99 × 10−14 m3(N m)−1 to 5.04 × 10−14 m3(N m)−1. This study proposes an innovative strategy to improve the interlaminar bonding of carbon fabric/resin laminated composite, which is conducive to obtaining composite with excellent mechanical and tribological properties. Highlights A facile and effectual method was adopted to introduce carbon fiber powder (CFP) into the interlamination and surface of the composites simultaneously. The mechanical properties and abrasive resistance of the composites were obviously strengthened by regulating the content and distribution of CFP. CFP at a certain scale, could not only hinder the propagation of cracks but also alleviate the surface wear and extend the service life of composites.

Carbon fibre-reinforced polydicyclopentadiene composites for automobile applications

Improved Interfacial Adhesion And Manufaturing Method Of Mgf/P-Dcpd Composites Using W, Mo, Or Ru Type Catalysts In Air Condition

Fatigue resistance of carbon fiber/polyphenylene sulfide composites engineered for automotive use

The Tribological and Mechanical Properties of Pdcpd/Pew Composites Prepared by Reaction Injection Moulding

Improving mechanical and tribological properties of carbon fabric/resin laminated composites by carbon fiber powder

Polydicyclopentadiene toughened epoxy resin and its carbon fiber composites via sequential polymerization

Improved interfacial adhesion of carbon fiber‐reinforced polydicyclopentadiene layered composite material by modification of norbornene derivatives

Application of poly(lactic acid)-grafted cellulose nanofibers as both inhibitor and reinforcement for 3D-printable tough polydicyclopentadiene composites via frontal ring-opening metathesis polymerization

Carbon fiber surface treatment for improved adhesion and performance of polydicyclopentadiene composites synthesized by ring opening metathesis polymerization

Study of Interlaminar Fracture Toughness and Flexural Properties of Carbon Fibre Composites Reinforced with Polyethersulfone/Graphene Oxide Films

Effect of carbon matrix on mechanical and tribological properties of Cf/Cu/C composites

Enhanced fracture properties of continuous Cf/ZrB2-based composites with polydopamine-derived carbon boundary layer

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

An investigation of the microstructure and tribological behavior of polyether ether ketone composites fabricated by extrusion‐based additive manufacturing

Processing and Characterization of Carbon Nanofibre Composites for Automotive Applications

3D orthogonal woven carbon fiber/PEEK composites with superior bending and flame-retardant properties

Preparation and Characterization of Dopamine-Modified Carbon Fiber Paper Composites for Gas Diffusion Layers

Repercussion of Fiber Content on the Mechanical, Thermal, and Thermomechanical Properties of Natural Fibers Reinforced Thermoplastic Composites for Automotive Application

Preparation of High-Performance Carbon Fiber-Reinforced Epoxy Composites by Compression Resin Transfer Molding

Effects of Carbon Fiber Content on the Crystallization and Rheological Properties of Carbon Fiber-Reinforced Polyamide 6

Tribological Characteristics of Fibrous Polyphthalamide-Based Composites