Abstract:The body force method (BFM) is an efficient computational method used for maneuvering simulations of marine vehicles with ordinary propellers. In this paper, an improved BFM is proposed to perform maneuvering simulations of a self-propelled AUV with a ducted propeller. Initially, the conventional BFM is applied to numerically investigate the open water performance of a ducted propeller(No. 19A+Ka4-70). However, significant prediction errors have been observed, which were mainly caused due to ignorance of the interaction between the duct and the propeller. To increase the prediction accuracy, an improved BFM is proposed to perform maneuvering simulations of the ducted propeller AUV by considering the mass flow correction. In addition, the external diameter of the actuator is proposed to be a function of real-time advance velocity. To investigate the efficacy of the proposed method, the simulated results have been compared with the model testing carried out in a towing tank and with the discretized propeller method. The proposed improved BFM is used to simulate the 20°/20° zigzag tests of AUV in both vertical and horizontal planes with different advance speeds. Simulated results, particularly propeller thrust, advance speed, pitch (or yaw), resistance, and especially duct thrust of AUV have significantly improved as compared to the conventional BFM. The improved BFM results were found in close agreement with discretized propeller method and thus, the proposed method is considered a highly efficient and computationally cost-effective method to perform maneuvering simulations of ducted-propeller marine vehicles. The present work can contribute to the fast optimization of the manoeuvrability of marine vehicles with ducted propeller.

Numerical Study on the Hull–propeller Interaction of Autonomous Underwater Vehicle

Study on the Interaction Characteristics of Hull-Propeller-appendages of Autonomous Underwater Vehicle Based on Unsteady Conditions

A Numerical and Experimental Study on the Hull-Propeller Interaction of A Long Range Autonomous Underwater Vehicle

Computational Fluid Dynamics Study of Autonomous Underwater Vehicle with Vectorial Thrusters

Hydrodynamic Performance Of A Flapping Wing Based Auv-A Numerical Study

Numerical study of the hydrodynamic performances of surface piercing propeller

Numerical Simulation Study on the Recovery Process of Autonomous Underwater Vehicle

Self-propulsion Performance Predictions of AUV Based on Response Surface Methodology

Thrust Performance of Propeller During Underwater Recovery Process of AUV

Hydrodynamic Coefficient Estimation of Small Autonomous Underwater Vehicle

Analysis and forecast of hydrodynamic simulation for small autonomous underwater vehicle

Numerical study on hydrodynamic performance of an underwater propulsive wing propulsor

Numerical Research on the Influence of Surface Waves on the Hydrodynamic Performance of an AUV

An Improved Body Force Method for Simulation of Self-Propulsion AUV with Ducted Propeller

Numerical Investigation on Hydrodynamic Performance of a Portable AUV

Numerical Simulation of Unsteady Propeller Force for a Submarine in Straight Ahead Sailing and Steady Diving Maneuver

Experimental and numerical simulation study of drag reduction on AUV grooved surfaces

Numerical Investigation on Interactive Hydrodynamic Performance of Two Adjacent Unmanned Underwater Vehicles (Uuvs)

Hydrodynamic Shape Optimization of an Autonomous Underwater Vehicle with an Integrated Lifting Line and Viscous Continuous Adjoint Approach

Numerical Investigation of Hydrodynamic Characteristics of a Rim-Driven Thruster Coupled with an Underwater Vehicle

Numerical Calculation of Hydrodynamic Interactions of Submarine Flow on AUV