Abstract:This study aims to propose a model for dynamically simulating the online-refueling process in pebble-bed reactor (PBR) using MCNPX. PBR has a special feature of online-refueling which can greatly reduce the outage time and enable a higher burnup in spent fuel. However, this feature also results in the dynamical fuel movements which may significantly increase the difficulty and the computational time in computer simulation. Therefore, an appropriate model is necessary to be proposed to simulate the burnup characteristics of online-refueling and to reduce the computational time simultaneously. All the calculations in this study were performed using MCNPX 2.7.0 with the ENDF/B-VII continuous energy nuclear data library. The PBR model was built according to the core design of HTR-10 but adopted some reasonable assumptions. The refueling process was emulated by utilizing the fuel loading scenario of the once through then out (OTTO) in combination with the layer-mixed-shell fuel movement. Additionally, the layer-mixed-shell fuel movement considered the concept of fuel channels, where the fuel pebbles only move in the same fuel channel, such that the burnup characteristics of fuel pebbles in both radial and axial direction can be identified separately. The core was divided into 9 fuel zones with a fixed volume and 3 fuel channels with a variety of fuel zones. Furthermore, the number of fuel zones in each fuel channel was determined based on the relative residence time of fuel pebbles in the core. The results revealed that the core can achieve an equilibrium fuel cycle after refueling several times, and after that all the core characteristics can nearly maintain unchanged between different cycles. Although the refueling process was modeled based on the OTTO fuel loading scenario instead of the multi-pass one, the discharged burnup can still reach the target burnup of the spent fuel for HTR-10, i.e. 72 GWd/tHM. In addition, the average discharged burnup under the equilibrium fuel cycle is approximate to 80 GWd/tHM, which also coincides the design value of the spent fuel for HTR-10. Therefore, the layer-mixed-shell movement model can consider the fuel movements in either radial or axial directions simultaneously and enable a more accurate prediction to the real refueling process of HTR-10 than our previous studies.

A Multi-Scale Coupling Algorithm for Burnup Calculation of Dispersed Particulate Poison

A Pairwise Nuclear Fusion Algorithm for Particle-in-cell Simulations: Weighted Particles at Relativistic Energies

Research on Coupling Scheme of Monte Carlo Burnup Calculation in RMC

An Equivalent Homogenization Method for Treating the Stochastic Media

Comparative Analysis of Coupling Schemes of Monte Carlo Burnup Calculation in RMC

Research on Preventing Xenon Oscillation in Monte Carlo Burnup Calculation Based on RMC

Improved Collision Probability Analysis of the Double-Heterogeneity Problem Based on Matrix Chord Length Correction

Development of the Integrated Parallelism Strategy for Large Scale Depletion Calculation in the Monte Carlo Code RMC

A Serpent/OpenFOAM coupling for 3D burnup analysis

A simple formula for local burnup based on constant relative reaction rate per nuclei

Monte Carlo simulation of dispersed coated particles in accident tolerant fuel for innovative nuclear reactors

Burnup-Dependent Core Neutronics Analysis of Plate-Type Research Reactor Using Deterministic and Stochastic Methods

A Machine-Learning Augmented Mixed Method for Simulating Α Particle Transport in Inertial Confinement Fusion

Research on the On-the-fly Homogenization Method Based on RMC Code for Criticality Calculations

Single-step Monte Carlo Criticality Algorithm

Calculation acceleration for fuel cycle simulation of molten salt reactor based on multi-group cross section method

Burnup computations of online-refueling process for pebble-bed reactors using layer-mixed-shell fuel movement model

Novel burnup measurement system via anti-compton techniques for HTR-10

Research on Reactivity-Equivalent Physical Transformation Method for Double Heterogeneity in Pressurized Water Reactors Based on Machine Learning

Optimization Treatment of Point-Wise Nuclear Data in Monte Carlo Criticality and Burnup Calculations

Multiobjective Genetic Algorithm Strategies for Burnable Poison Design of Pressurized Water Reactor