Abstract:Lithium–sulfur batteries (LSBs) suffer from sluggish reaction kinetics of sulfur-containing species and loss of soluble polysulfides (PSs) during cycling, especially in the case of liquid electrolytes. Here, we improve the kinetics of sulfur species by decorating Mo2C nanoparticles on carbon nanotubes (CNTs) as the host for sulfur active mass. In addition, by use of gel polymer electrolytes (GPEs) derived from in situ polymerization of 1,3-dioxolane (DOL) to mitigate the diffusion of PSs and improve the stability of Li stripping/plating. As a result, the sulfur cathodes are endowed with enhanced initial specific capacity and suppressed dissolution of sulfur species. The cells with CNT/Mo2C/S cathodes and GPE exhibit excellent electrochemical performance. The anodes cycled with GPE show remarkably enhanced lithium plating-stripping behavior. Benefitting from the synergistic effect, LSBs with higher energy density and improved durability are obtained, demonstrating a new approach for developing high-performance quasi-solid-state Li metal batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14629.DFT computational method; TEM images of CM-0, CM-10, CM-20, and CM-40; TEM and elemental mapping images of CM-20; TGA curves of CM-0, CM-10, CM-20, and CM-40; pore size distribution curves of CM-20; survey scans spectra of CM-0 and CM-20; Raman spectra and FTIR spectra of CM-0, CM-10, CM-20, and CM-40; schematic diagram of the polymer polymerized by DOL; FTIR spectra of DOL before and after polymerization; SEM images of the PP separator and PP separator with GPE of the cycled cell; initial model of CNTs and Mo2C; electrochemical impedance plot of the cells with CM-0/S and CM-20/S; Mo 3d XPS spectra of the cycled CM-20/S cathode; permeation behavior of Li2S6 in GPE after 0 and 48 h; and cyclic performance of cell with CM-20/S at 1.0C (PDF)This article has not yet been cited by other publications.

g-C3N4/MoO3 composite with optimized crystal face: A synergistic adsorption-catalysis for boosting cathode performance of lithium-sulfur batteries

Two-dimensional Molybdenum Nitride Nanosheets Modified Celgard Separator with Multifunction for LiS Batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Suitable polysulfides adsorption and conversion on MoSe2@g-C3N4 interlayer for advanced lithium-sulfur batteries

Ordered Dual-Channel carbon embedded with molybdenum nitride catalytically induced High-Performance Lithium-Sulfur battery

Cobalt and Molybdenum Carbide Nanoparticles Grafted on Nitrogen‐Doped Carbon Nanotubes as Efficient Chemical Anchors and Polysulfide Conversion Catalysts for Lithium‐Sulfur Batteries

Synergistic mediation of polysulfide immobilization and conversion by a catalytic and dual-adsorptive system for high performance lithium-sulfur batteries

Ultra‐Dispersed α‐MoC 1−x Embedded in a Plum‐Like N‐Doped Carbon Framework as a Synergistic Adsorption–Electrocatalysis Interlayer for High‐Performance Li–S Batteries

Separator modified by a caterpillar-like composite with interconnected N-doped carbon nanotubes decorated Co-MnO heterointerface enabling robust polysulfide adsorption and catalytic conversion for Li-S batteries

Synergistic effect of multifunctional Co3O4@C@MnO2 composite for enhancing redox kinetics toward stable lithium-sulfur battery

Highly Catalytic Porous MoN Nanosheets Anchored Carbon Microtubes Interlayer for Lithium-Sulfur Batteries

MOF derived MoP nanorods decorated N-doped thin carbon layer as robust lithiophilicity and sulfiphilicity nanoreactor for high-performance Li-S batteries

Mo 2 C Electrocatalysts for Kinetically Boosting Polysulfide Conversion in Quasi-Solid-State Lithium–Sulfur Batteries

Mo 2 C‐Embedded Carbon Nanofibers as the Interlayer in High‐Performance Lithium‐Sulfur Batteries

Synergistic catalytic conversion and chemisorption of polysulfides from Fe/Fe 3 C/FeN 0.0324 nanocubes modified separator for advanced Li-S batteries

Ultra-thin 2D MoO2 nanosheets coupled with CNTs as efficient separator coating materials to promote the catalytic conversion of lithium polysulfides for advanced lithium-sulfur batteries

MoC/N-C composites derived from Mo doped ZIF-8 for separator modification of lithium-sulfur batteries

Mo2C Electrocatalysts for Kinetically Boosting Polysulfide Conversion in Quasi-Solid-State Lithium-Sulfur Batteries

MOF derived cobalt-nickel bimetallic phosphide (CoNiP) modified separator to enhance the polysulfide adsorption-catalysis for superior lithium-sulfur batteries

Construction of Co@N-CNTs grown on N-MoxC nanosheets for separator modification to enhance adsorption and catalytic conversion of polysulfides in Li-S batteries