Abstract:The lithium (Li)-metal anode is deemed as the "holy gray" of the next-generation Li-metal system because of its high theoretical specific capacity, minimal energy density, and lowest standard electrode potential. Nevertheless, its commercial application has been limited by the large volume variation during charge and discharge, the unstable interface between the Li metal and electrolyte, and uneven deposition of Li. Herein, we present a 3D host (Cu) with lithiophilic matrix (CuO and SnO2) in situ modification via a facile ammonia oxidation method to serve as a current collector for the Li-metal anode. The 3D Cu host embellished by CuO and SnO2 is abbreviated as 3D CSCC. By increasing interfacial activity, lowering the nucleation barrier, and accommodating changes in volume of the Li metal, the 3D CSCC electrode effectively demonstrates a homogeneous and dendrite-free deposition morphology with an excellent cycling performance up to 3000 h at a 1.0 mA cm–2 current density. Additionally, the full cells paired with CSCC anodes and LiCoO2 cathodes show good capacity retention performance at 0.2 C.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13896.XPS survey spectrum of 3D CSCC; EDS mapping images of 3D CSCC; SEM images of various amounts of Li plating in 3D CSCC with a current density of 1.0 mA cm-2; SEM images of various amounts of Li stripping in Cu foil with a current density of 1.0 mA cm-2; SEM images of various amounts of Li stripping in 3D CSCC with a current density of 1.0 mA cm-2; plating/stripping SEM images of 10 and 50 cycles in 3D CSCC at a current density of 1.0 mA cm-2 with a density of 1.0 mA h cm-2; 10th, 50th, 100th, and 200th circles of voltage profiles of Li plating/stripping on 3D CSCC at a current density of 0.5 mA cm-2 with a capacity of 0.5 mA h cm-2; voltage–time profiles of the Li-plated plane 3D CSCC and the Cu foil current collector Li||Li symmetric cell; detailed voltage profiles of 3D CSCC and the Cu foil current collector electrodes in symmetric cells at a current density of 1.0 mA cm-2 with a capacity of 1.0 mA h cm-2; voltage profiles of the Li-plated CSCC||Li symmetric cell at increasing current densities from 0.5 to 1.0, 2.0, and 4.0 mA cm-2 for a 1.0 mA h cm-2 capacity; cycling performances of LCo|| CSCC cells at a rate of 1 C and 2 C; EIS of 3D CSCC and the Cu foil current collector in different electrolytes; and voltage profiles of Li plating on 3D CSCC with a capacity of 1.0 mA h cm-2 at a current density of 1.0 mA cm-2 in different electrolytes (PDF)This article has not yet been cited by other publications.

In Situ Generated Mixed Ion/Electron-Conducting Scaffold with Uniform Li Deposition for Flexible Li Metal Anodes

Highly Lithiophilic Copper-Reinforced Scaffold Enables Stable Li Metal Anode

Uniform Deposition of Li-Metal Anodes Guided by 3D Current Collectors with In Situ Modification of the Lithiophilic Matrix

Regulating Lithium Nucleation and Deposition via MOF‐Derived Co@C‐Modified Carbon Cloth for Stable Li Metal Anode

Constructing Three-Dimensional Flexible Lithiophilic Scaffolds with Bi 2 O 3 Nanosheets toward Stable Li Metal Anodes

A Lithiophilic 3D Conductive Skeleton for High Performance Li Metal Battery

Conformal 3D Li/Li13Sn5 Scaffolds Anodes for High‐Areal Energy Density Flexible Lithium Metal Batteries

Three-Dimensional (3D) Nanostructured Skeleton Substrate Composed of Hollow Carbon Fiber/Carbon Nanosheet/ZnO for Stable Lithium Anode

Flexible mixed ion-electron conductor fabric for stable and dendrite-free Li-metal anodes

A Flexible Carbon Nanotube Film Modified with Gradient Lithiophilic Cu2O/Cu Heterojunction for Dendrite-Free Lithium Metal Anodes

Realizing Compact Lithium Deposition via Elaborative Nucleation and Growth Regulation for Stable Lithium-Metal Batteries

Regulating Li nucleation/growth via implanting lithiophilic seeds onto flexible scaffolds enables highly stable Li metal anode

Regulating Lithium Nucleation Via CNTs Modifying Carbon Cloth Film for Stable Li Metal Anode

In-Situ Electrodeposition of Nanostructured Carbon Strengthened Interface for Stabilizing Lithium Metal Anode

Hollow SiO x /C Microspheres with Semigraphitic Carbon Coating as the “Lithium Host” for Dendrite-Free Lithium Metal Anodes

Simultaneously Homogenized Electric Field and Ionic Flux for Reversible Ultrahigh-Areal-Capacity Li Deposition

<i>In situ</i> coating of a lithiophilic interphase on a biporous Cu scaffold with vertical microchannels for dendrite-free Li metal batteries

General construction of lithiophilic 3D skeleton for dendrite-free lithium metal anode via a versatile MOF-derived route

Flexible, freestanding and lithiophilic Indium/MXene heterostructure enabling dendrite-free lithium metal anode in commercial carbonate-based electrolyte with high voltage cobalt-free LiNi0.5Mn1.5O4 cathode

Scalable slurry-coating induced integrated 3D lithiophilic architecture for stable lithium metal anodes

Bottom-Up Li Deposition by Constructing a Multiporous Lithiophilic Gradient Layer on 3D Cu Foam for Stable Li Metal Anodes