Abstract:With the fast development of full-field vibration measurements by combining digital image correlation (DIC) technique with the integrated highspeed camera system, the structural characteristic deflection shapes (CDS’s) can be readily captured, which are sensitive for damage localization. Naturally, the mode shapes are preferred due to their higher signal to noise ratio. However, traditional modal analysis methods are inefficient in processing the large volumes of data that acquired by high-speed camera system for mode shape-based damage localization. Moreover, how to extract the damage features and enhance the damage localization results without the baseline-data of the intact state is another challenging issue. To address these problems, a novel damage localization method is proposed by enhancing the mode shape estimation and optimizing the damage feature extraction. Firstly, the dominant singular vector at each interested resonant frequency is individually evaluated as the mode shapes in the proposed time domain decomposition (TDD) method. Moreover, based on the extracted mode shapes, a pseudo-excitation (PE) method is proposed to reveal the damage locations without baseline-data by examining the perturbation of local dynamic equilibrium. To circumvent the effects of measurement noise on PE method, an adaptive denoising technique is proposed based on Gaussian smoothing. Furthermore, the local contiguity and spatial sparsity of the damage-caused features are harnessed by a hierarchical clustering to optimize the damage localization performance via tuning the scale parameter of Gaussian smoothing. Finally, numerical and experimental studies of crack damaged plates are conducted to validate the feasibility and effectiveness of the proposed mode shape estimation and damage localization methods. During the experiment, the full-field vibration measurements are acquired by using an integrated binocular highspeed camera system. In addition, a comparison study based on benchmark data is carried out to demonstrate the performance and reliability of the proposed damage localization method.

Damage Detection Method Based on Defect Mode for Orthogonal Grid Stiffened Panels

Multistage Damage Detection Method Based on the Defect Mode for Periodically Stiffened Panels

Damage Detection Method Based on Lamb Waves for Stiffened Composite Panels

Damage Detection Based on Vibration for Composite Sandwich Panels with Truss Core

Damage Detection of Composite Structures Using Dynamic Analysis

Robust Structural Damage Detection and Localization Based on Joint Approximate Diagonalization Technique in Frequency Domain

Output-Only Damage Identification Using Enhanced Structural Characteristic Deflection Shapes and Adaptive Gapped Smoothing Method

Damage modes detection of composite laminates using improved modal strain energy method

Adaptive Damage Localization Based on Locally Perturbed Dynamic Equilibrium and Hierarchical Clustering

Vibration-based Damage Diagnosis of Composite Sandwich Panels with Bi-Directional Corrugated Lattice Cores

Damage Detection For Laminated Composite Structures With Wavelet Analysis

Eigenvalue Perturbation Theory with Applications to Small Structural Damage Detection

Damage Detection Method for Composite Structures Based on a Combined Technique of Cross Modal Strain Energy and Niche Genetic Algorithms

An Improved Adjacent Wave Subtraction Method for Damage Detection in Stiffened Composite Panels

Vibration-Based Non Destructive Structural Damage Detection

Vibration-based damage detection in composite wingbox structures by HHT

Damage Detection for an Elastic Thin Plate Based on Gauss Curvature Modal Difference

Modal Analysis and Damage Localization in Plate-Type Structures Via TDD and PE Methods Based on the Data of an Integrated Highspeed Camera System

Vibration-based Damage Identification of Sandwich Panels with Truss Core

Damage Detection of Sandwich Panels with Truss Core Based on Time Domain Dynamic Responses

Vibration-Based Damage Detection with Structural Modal Characteristics