Abstract:The significance and complexity of cyclic behavior of saturated silt under non-proportional loading are still of great concern in practice, due to the highly inherent anisotropy of soil fabric. This paper presents an experimental investigation conducted in an automated hollow cylinder apparatus into the undrained anisotropy and cyclic resistance of a saturated marine silt under wave-induced non-proportional loading, which is replicated by simultaneous changeover in magnitudes and directions of the principal stress. Special attention is paid to the influence of cyclic shear mode and stress path, characterized by the cyclic stress ratio (CSR) and the ratio (delta) of the amplitude of deviatoric stress components (i.e. deviator stress and torsional shear stress), on the pore pressure response and deformation characteristics. The cyclic stress path is not a negligible factor for the cyclic resistance of saturated silt in the non-proportional loading, but had significant impact. The CSR can not properly characterize the resistance of silt to cyclic shearing, involving continuous rotation of the principal stress. This observation is considered to be directly associated with the soil fabric anisotropy. Remarkably, for all loading patterns investigated, the pore pressure ratio r(u) is uniquely correlated with the generalized shear strain gamma(g), rather than to the CSR. Consequently, a closed-form expression is proposed to relate gamma(g) and r(u), which can be used to predict the onset of failure as well as the pore pressure at a specific strain. By using the equivalent cyclic stress ratio (ESR) to characterize the cyclic undrained resistance of saturated marine silt (in terms of the number of cycles required to failure, N-L), a virtually unique correlation between ESR and N-L can be established for all the non-proportional loading investigated.

Excess Pore Water Pressure Generation in Saturated Sandy Soils Subjected to Various Cyclic Stress Paths

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Energy-Based Approach to Quantify Cyclic Resistance and Pore Pressure Generation in Anisotropically Consolidated Sand

Pore pressure characteristics of sand subjected to irregular loadings

A Unified Model of Cyclic Shear–Volume Coupling and Excess Pore Water Pressure Generation for Sandy Soils under Various Cyclic Loading Patterns

Excess Pore-Water Pressure Generation in Cyclic Undrained Testing

Cyclic accumulative deformation of sand and its explicit model

Characteristics of Excess Pore Water Pressure of Nanjing Saturated Fine Sand under the Interaction of Wave and Earthquake Loading

An energy-based model for the generation of excess pore water pressure in saturated coral sand

Experimental Research On Behaviors Of Saturated Loose Sand Subjected To Oblique Ellipse Stress Path

Pore Water Pressure Increment Model for Saturated Nanjing Fine Sand Subject to Cyclic Loading

BEHAVIOR OF PORE WATER PRESSURE IN DYNAMIC TRIAXIAL TESTS OF SATURATED SOFT CLAY AND ITS EFFECT ON EFFECTIVE STRESS PATH

Undrained Anisotropy and Cyclic Resistance of Saturated Silt Subjected to Various Patterns of Principal Stress Rotation

Monotonic and Cyclic Characteristics of K0-Consolidated Saturated Soft Clay under a Stress Path Involving a Variable Confining Pressure

Strain and pore pressure development on soft marine clay in triaxial tests with a large number of cycles

Development of pore water pressure in anisotropically consolidated sand under cyclic torsional loading

Permanent Deformation Characteristics of Saturated Sand under Cyclic Loading

Fluctuating Characteristics of Excess Pore Water Pressure in Nanjing Fine Sand under Partially Drained Conditions

Development characteristics of excess pore water pressure in saturated marine coral sand based on shear strain characteristics: An experimental study

Cyclic Resistance of Saturated Silt under Wave-Induced Non-Proportional Loading