Abstract:Gallium nitride (GaN) high electron mobility transistors (HEMTs) are promising power devices due to their excellent characteristics. However, GaN HEMTs have vulnerable gates that are susceptible to noise and voltage spikes, limiting their implementation in power converters. This paper presents a GaN HEMTs half-bridge driver with bandgap reference comparator clamping (BGRCC) and dual level shifters (DLS) for high switching frequency automotive applications. The BGRCC scheme can adaptively clamp the bootstrap rail voltage at an appropriate level with acceptable voltage ripples, which guarantees the safety of high-side GaN HEMT. Meanwhile, DLS scheme is applied in both the high- and low-side driving path to effectively drive the GaN HEMTs with low propagation delay and high dv/dt immunity. The proposed driver is fabricated in 0.18 μm high voltage bipolar-complementary metaloxide semiconductor (CMOS)-double-diffused metaloxide semiconductor (DMOS) process and can support 2–10 MHz operating. The functionality and performance are verified by experimental results. A buck converter utilizing this driver with GaN HEMTs can achieve maximum efficiency of 91.58% with quite electromagnetic interference behavior in the 16.5-W output power rating when operating at 2 MHz, which is superior to conventional silicon-based power converters and suitable for automotive applications.

A Fully Integrated Heterogenous Si-CMOS/GaN 500 MHz 6 V-to-18 V Boost Converter Chip

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

Fully Integrated High-Voltage Level Shifts and Drivers for Buck Converters.

A Tri-Slope Gate Driving GaN DC–DC Converter with Spurious Noise Compression and Ringing Suppression for Automotive Applications

A GaN-based MHz Active Clamp Flyback Converter with Adaptive Dual Edge Dead Time Modulation for AC-DC Adapters.

A Buck Converter with Cost-Effective GaN/Si Hybrid Switches and CRM Operation for High-Efficiency and High-Power-Density Applications

A High Frequency High Efficiency GaN Based Bi-Directional 48V/12V Converter with PCB Coupled Inductor for Mild Hybrid Vehicle

MHz Level Two-Stage ZVS DC-DC Converter with Wide Input and Output Voltage Ranges

An 8A 998A/inch<SUP>3</SUP> 90.2% Peak Efficiency 48V-to-1V DC-DC Converter Adopting On-Chip Switch and GaN Hybrid Power Conversion

A 400W, 99.3% Efficient GaN Buck-Boost Converter

Comparison of the performance of Si, SiC, and GaN based switching elements in high gain DC-DC boost converter

AlGaN/GaN Metal-Insulator-Semiconductor (Mis)-Hfets Based DC-DC Boost Converters with Integrated Gate Drivers

High Efficiency High Density 1 MHz 380–12 V DCX with Low FoM Devices

A 400 V Buck Converter integrated with Gate-Drivers and low-voltage Controller in a 25–600 V mixed-mode SiC CMOS technology

A 1-Mhz ZVS Boost DC-DC Converter with Active Clamping Using GaN Power Transistors

Monolithic Heterogeneous Integration of Si(100)/GaN CMOS Inverters and Normally-Off GaN Power Devices for High Switching Frequency and High Power Applications

An Up to 10mhz 6.8% Minimum Duty Ratio GaN Driver with Dual-MOS-Switches Bootstrap and Adaptive Short-Pulse Based High-CMTI Level Shifter Achieving 6.05% Efficiency Improvement

An Extremely High Efficient Three-Level Active Neutral-Point-Clamped Converter Comprising SiC and Si Hybrid Power Stages

Design and Integration of Beyond-10MHz High Switching Frequency DC-DC Converter

A 12-Level Series-Capacitor 48-1V DC–DC Converter With On-Chip Switch and GaN Hybrid Power Conversion

A High Performance Integrated Boost DC-DC Converter for Portable Power Supply