Abstract:The growing demand for clean and efficient energy sources has been a direct result of the serious effect on the climate and the environment associated with high emissions of pollutants that are mainly produced by fossil fuel-based energy generators. Currently, green technology like proton exchange membrane fuel cells (PEMFC) can produce zero-emissions energy power by primarily using the electrochemical reactions of hydrogen and oxygen to generate electrical energy. Additionally, due to their high activity, Platinum (Pt) nanoparticles (NPs) distributed on a carbon catalyst support are considered the most efficient catalyst materials used in this technology. However, the main drawbacks of this technology are (i) the scarcity of Pt, making it very expensive for widespread fuel cell application and commercialization, and (ii) the susceptibility of the carbon support to corrosion and degradation when operating even at the most typical PEMFC conditions. Carbon corrosion can induce the loss of Pt NPs' active surface area when Pt detaches from the carbon support or agglomerates into larger Pt NPs, leading to premature performance losses in a PEMFC. In this work, we propose a novel approach to prevent carbon corrosion by selectively depositing a corrosion-resistant thin layer (~2 nm) of titanium nitride (TiN) only on the surface of the carbon support while the catalyst centers are left uncoated and accessible for reagent reactions (oxygen O and H + protons). TiN was used as the coating material because of its attractive properties, such as electronic conductivity, enough to enable the free movement of electrons from the current collector toward the catalytic centers. The TiN layer would also act as an anchoring mechanism of Pt NPs, preventing their mobility on the carbon support and subsequent agglomeration. The deposition of TiN layers was carried out at 150°C with a hollow-cathode plasma-assisted atomic layer deposition (HCPA-ALD) reactor and using tetrakis(dimethylamino)titanium (IV) as the metal precursor in Ar/N 2 plasma, from which nitrogen was used as the co-reactant. Before HCPA-ALD, to prevent TiN from depositing on top of the Pt NPs, the surface of Pt NPs was selectively coated with a thin film of oleylamine (OAm), a polymer that would only absorb onto Pt NPs, which is later removed from the catalyst system (after the HCPA-ALD process is finished) by heat treatment at 185°C. Here we will mainly focus on the TiN deposition process and the subsequent transmission electron microscopy (TEM) characterization performed on these nanoparticles, which allows us to prove the successful formation of homogenous coatings and architecture characteristics of these nanoparticles after oleylamine application and TiN deposition. Electrochemical characterization, including cyclic voltammetry (CV) and oxygen reduction reaction (ORR), was performed in a rotating disc electrode (RDE) to further confirm the activity and effectiveness of our designed catalyst. Our preliminary results have shown that highly conformal TiN can be successfully grown onto Pt/C nanoparticles (as powders) by using HCPA-ALD with a custom-made agitator mechanism. The second phase of this research will be focused on inspecting the degradation mechanisms this novel catalyst system experiences after potential cycling in a Membrane Electrode Assembly (MEA).

Theoretical Insights into Electronic Structures and Durability of Single-Atom Pd/TiN Catalysts

In-Situ X-Ray Absorption Fine Structures Study for the Application of the Octahedral Pt-Ni/C Catalyst in Membrane Electrode Assembly

Theoretical Insights into the Energetics and Electronic Properties of MPt12 (M = Fe, Co, Ni, Cu, and Pd) Nanoparticles Supported by N-doped Defective Graphene

Anchoring Highly Dispersed Pt Electrocatalysts on TiOx with Strong Metal-Support Interactions Via an Oxygen Vacancy-Assisted Strategy As Durable Catalysts for the Oxygen Reduction Reaction.

Oxygen Defects Containing TiN Films for the Hydrogen Evolution Reaction: A Robust Thin-Film Electrocatalyst with Outstanding Performance

Pt/TiN–TiO2 Catalyst Preparation and Its Performance in Oxygen Reduction Reaction

Oxygen Vacancy and Nitrogen Doping Collaboratively Boost Performance and Stability of TiO2-supported Pd Catalysts for CO2 Photoreduction: a DFT Study

Strong Interaction between Titanium Carbonitride Embedded in Mesoporous Carbon Nanofibers and Pt Enables Durable Oxygen Reduction

Understanding the Oxygen Reduction Reaction Activity and Oxidative Stability of Pt Supported on Nb-Doped TiO2

Strong Metal-Support Interaction Induced by Oxygen Vacancies to Enhance the Activity and Durability of Pt/TiO2/ Hollow Carbon Nanospheres ORR Catalyst

Nitrogen Doped Titania Stabilized Pt/C Catalyst Via Selective Atomic Layer Deposition for Fuel Cell Oxygen Reduction

Synthesis and Characterization of Platinum on Carbon Nanoparticles Selectively Coated with Titanium Nitride (TiN)

A TiN@C core–shell support for improving Pt catalyst corrosion resistance

Fundamental structural and electronic understanding of palladium catalysts on nitride and oxide supports

Understanding the Oxygen Reduction Reaction Activity and Oxidative Stability of Pt Supported on Nb‐Doped TiO 2

Enhanced Durability of Pt Electrocatalyst with Tantalum Doped Titania As Catalyst Support

TiN as Radical Scavenger in Fe─N─C Aerogel Oxygen Reduction Catalyst for Durable Fuel Cell

Oxygen vacancy induced interaction between Pt and TiO 2 to improve the oxygen reduction performance

Atomic Controlled Shell Thickness on Pt@Pt3Ti Core-Shell Nanoparticles for Efficient and Durable Oxygen Reduction

Interaction Between Palladium Nanoparticles and Surface‐Modified Carbon Nanotubes: Role of Surface Functionalities

Monodisperse Pt Nanoparticles Anchored on N-doped Black TiO2 As High Performance Bifunctional Electrocatalyst