Abstract:Hydrogen peroxide (H2O2) is a green oxidant that widely used in environmental remediation and chemical industries, hence the exploration of suitable modified cathode for the cost-effective electrochemical synthesis of H2O2 is of great importance. In this work, tert-butyl-anthraquinone (TBAQ) was attempted to modify four kinds of typical carbon materials (carbon aerogel, carbon nanotube (CNT), carbon black and graphene-doped carbon black) to fabricate gas diffusion electrode (GDE) to improve H2O2 production for potential use in electro-Fenton process. It was found that CNT-GDE containing 2% TBAQ had the highest H2O2 production (150.6 mg/L) with a high current efficiency (95%) and low energy consumption (2.43 kWh/(kg H2O2)) among four carbon materials because of the redox of TBAQ and more active sites (C–C sp3 carbon and oxygen-containing functional groups). The effects of TBAQ addition amount, current and initial pH on H2O2 performance were investigated. The presence of TBAQ could improve oxygen reduction activity, H2O2 selectivity and hydrophobicity to improve H2O2 production. Suitable current (50 mA) and initial pH benefited the enhancement in H2O2 production. The CNT-GDE containing 2% TBAQ showed better H2O2 production performance with good stability when comparing with literature, indicating promising for electro-Fenton application.

Ce-doped SBA-15 Supported Pd Catalyst for Efficient Hydrogenation of 2-Ethyl-anthraquinone

Insight into the Promotional Effect of CE Doped in (feconicrmn)3o4 High Entropy Oxides for Solvent-Free Aerobic Oxidation of Benzyl Alcohol

Pd/CeO2 Interface with Abundant Oxygen Vacancies for Alkaline Hydrogen Evolution/Oxidation Reaction

Selective Hydrogenation of 2-Ethylanthraquinone over an Environmentally Benign Ni_B/SBA-15 Catalyst Prepared by a Novel Reductant–impregnation Method

Regulation of the Selective Hydrogenation Performance of Sulfur-Doped Carbon-Supported Palladium on Chloronitrobenzene

Pd/NiO/Al Array Catalyst for 2-Ethylanthraquinone Hydrogenation: Synergistic Effect Between Pd and NiO/Al Support

Boosting the catalytic performance of core-shell structured Ru@Pd/SBA-15 in 2-ethyl-anthraquinone hydrogenation by tuning d -band center

Study on Catalytic Oxidation of Oleic Acid by Ce-SBA-15 Modified Molecular Sieve

Catalytic Hydrogenation of 2-Ethylanthraquinone Using an in Situ Synthesized Pd Catalyst

One-pot synthesis of 2-ethylanthraquinone from phthalic anhydride and ethylbenzene over a Sc-modified Hβ catalyst

Mofs-derived CuCeOx Supported on H-zeolite Socony Mobile-5 for Catalytic Oxidation of 1,2-Dichlorobenzene

Pd nanoparticles anchored and stabilized on N-doped boehmite@C with enhanced catalytic performance in 2-ethyl-9,10 anthraquinone hydrogenation

Reaction Mechanism of Anthraquinone Hydrogenation over Pd Based Monometallic and Bimetallic Catalyst

Enhanced catalytic oxidation of diluted ethylene oxide on Pt/CeO<sub>2</sub> catalyst under low temperature

Atomically Dispersed Palladium Catalyst for Chemoselective Hydrogenation of Quinolines

Synthesis, Characterization of Bimetallic Ce–Fe-SBA-15 and Its Catalytic Performance in the Phenol Hydroxylation

Self-assembled Pd/CeO2 Catalysts by a Facile Redox Approach for High-Efficiency Hydrogenation of Levulinic Acid into Gamma-Valerolactone

Improving the yield of hydrogen peroxide on gas diffusion electrode modified with tert-butyl-anthraquinone on different carbon support

Facile Synthesis of P25@Pd Core-Shell Catalyst with Ultrathin Pd Shell and Improved Catalytic Performance in Heterogeneous Enantioselective Hydrogenation of Acetophenone

STUDY ON PREPARATION AND HYDROGENATION OF ANTHRAQUINONE OVER MESOPOROUS CARBON SUPPORTED PALLADIUM CATALYSTS

The Geometric and Electronic Effects of Ceria on Promoting PdZn Catalyst for Enhanced Acetylene Semi‐Hydrogenation