Abstract:Nanoparticle dispersions at a minute concentration in salt mixtures have recently been reported to significantly increase their specific heat capacity. However, there is a discrepancy between experimental results reported for the same kind of molten salt-nanoparticle mixtures by different research groups. From our literature survey, we learned that there is no standardized synthesis protocol for preparing molten salt nanofluids. In general, two-step method has been the most widely used in the literature. Nanoparticles and salts are dispersed in an aqueous solution. The mixture is then ultrasonicated to disperse the nanoparticles homogeneously. The mixture is then dried at elevated temperatures to obtain uniformly mixed salt-nanoparticle mixture, which results in a molten salt nanofluid when the mixture is heated above the melting point of the salt mixture. In this method, the duration of the ultrasonication can play an important role in the dispersion of nanoparticles. However, there is no consensus on how much time is required to disperse nanoparticles homogeneously. Literature survey shows that the duration of ultrasonication used to prepare molten salt nanofluids varies from 0.5 h to 5 h. In this study, we assume that the discrepancy reported in the literature could be due to different ultrasonication times used in different studies. We chose the most widely studied molten salt nanofluids, synthesized in different ultrasonication times, compared their specific heat capacity enhancements, and proposed the optimum ultrasonication time to apply for future molten salt nanofluid preparation. Thermogravimetric analysis was performed to study the thermal stability of the pure salts and nanofluids from 100 °C to 600 °C. Nanofluids prepared using 3 h of ultrasonication time showed the highest enhancement of 1.70 kJ/kg°C, which was approximately 15.6 % higher than the pure base salts. The result of the study can be impactful in solar energy industry sector and can be used as a guideline to prepare molten salt nanofluids for their solar thermal energy storage media.

Experimental study on sodium acetate trihydrate/glycerol deep eutectic solvent nanofluids for thermal energy storage

Phase Change Characteristics of Ethylene Glycol Solution-Based Nanofluids for Subzero Thermal Energy Storage

Solidification Behavior of Hybrid Tio2 Nanofluids Containing Nanotubes and Nanoplatelets for Cold Thermal Energy Storage

Non-Isothermal Crystallization of Aqueous Nanofluids with High Aspect-Ratio Carbon Nano-Additives for Cold Thermal Energy Storage

Experimental Study on a Superstable Nano-TiO 2 Deep Eutectic Solvent Nanofluid for Solar Energy Harvesting

Evaluation of Surfactant on Stability and Thermal Performance of Al2O3-ethylene Glycol (EG) Nanofluids

Control of epithelial development.

Nanofluid Heat Capacities

Experimental Study on Thermal Properties and Light-to-Thermal Conversion Performance of Ionic Liquids Based Nanofluids

Al 2 O 3 nanoparticles integration for comprehensive enhancement of eutectic salt thermal performance: Experimental design, molecular dynamics calculations, and system simulation studies

Stable and environmentally benign nanofluids for direct absorption solar collectors based on natural deep eutectic solvents

Improving Thermal Energy Storage in Solar Collectors: A Study of Aluminum Oxide Nanoparticles and Flow Rate Optimization

A synthesis parameter of molten salt nanofluids for solar thermal energy storage applications

Development and thermal characteristics of phase change nanoemulsions for low-temperature thermal energy storage

Experimental Investigation on Preparation and Stability of Al2O3 Nanofluid In Deionized Water and Ethylene Glycol

Study on melting process of latent heat energy storage system by nano-enhanced phase change material under rotation condition

Experimental investigation of nanofluids for heat pipes used in solar photovoltaic panels

Experimental and Simulation Study on Enhancing Thermal Energy Storage and Heat Transfer Performance of Ternary Chloride Eutectic Salt by Doping MgO Nanoparticles

Stability, thermal performance and artificial neural network modeling of viscosity and thermal conductivity of Al<sub>2</sub>O<sub>3</sub>-ethylene glycol nanofluids

Investigation of Thermodynamic Properties and Stability of Metal Oxide (CuO and Al2O3)/Deionized Water Nanofluids for Enhanced Heat Transfer Applications

Experimental Study on Preparation and Physical Properties of Nanofluids