Abstract:Amorphous zero-valent iron (AZVI) has attracted wide attention due to its high-efficiency reduction ability. However, the effect of different EDA/Fe(II) molar ratios on the physicochemical properties of the synthesized AZVI requires further investigation. Herein, series of AZVI samples were prepared by changing the molar ratio of EDA/Fe(II) to 1/1 (AZVI@1), 2/1 (AZVI@2), 3/1 (AZVI@3), and 4/1 (AZVI@4). When the EDA/Fe(II) ratio increased from 0/1 to 3/1, the Fe proportion on the AZVI surface increased from 26.0 to 35.2% and the reducing ability was enhanced. As for AZVI@4, the surface was severely oxidized to form a large amount of FeO, and the Fe content was only 74.0%. Moreover, the removal ability of Cr(VI) was in the order AZVI@3 > AZVI@2 > AZVI@1 > AZVI@4. The isothermal titration calorimetry results revealed that the increase of the molar ratio of EDA/Fe(II) would lead to the stronger complexation of EDA with Fe(II), which resulted in the gradual decrease of the yield of AZVI@1 to AZVI@4 and the gradual deterioration of water pollution after the synthesis. Therefore, based on the evaluation of all indicators, AZVI@2 was the optimal material, not only because its yield was as high as 88.7% and the secondary water pollution level was low, but most importantly, the removal efficiency of Cr(VI) by AZVI@2 was excellent. Furthermore, the actual Cr(VI) wastewater with the concentration of 14.80 mg/L was treated with AZVI@2, and the removal rate of 97.0% was achieved after only a 30 min reaction. This work clarified the effect of different ratios of EDA/Fe(II) on the physicochemical properties of AZVI, which provided insights for guiding the reasonable synthesis of AZVI and is also conducive to investigating the reaction mechanism of AZVI in Cr(VI) remediation.

Fabricating Amorphous Zero-Valent Iron for Cr(VI) Efficient Reduction: Unveiling the Effect of Ethylenediamine on Physicochemical Properties.

Facile Improvement of Nanoscale Zero-Valent Iron Activity with Exceptional Stability for Reduction of Cr(VI)

Mechanochemical Synthesis of Nitrogen-Modified Microscale Zero-Valent Iron for Efficient Cr(VI) Removal: the Role of Lattice Strain

Physicochemical Effects of Sulfur Precursors on Sulfidated Amorphous Zero-Valent Iron and Its Enhanced Mechanisms for Cr(VI) Removal

Synthesizing Sulfidated Zero-Valent Iron for Enhanced Cr(VI) Removal: Impact of Sulfur Precursors on Physicochemical Properties

Chromium Removal Using Resin Supported Nanoscale Zero-Valent Iron.

Efficient Fe(III)/Fe(II) cycling mediated by -cysteine functionalized zero-valent iron for enhancing Cr(VI) removal

Rationally Engineered Core-Shell Structured Fe0@FeS Towards the Efficacious Synergistic Cr(VI) and Ni(II) Removal

Kaolinite Loaded Amorphous Zero-Valent Iron Enhanced Removal of Cadmium (II) from Aqueous Solution

Efficient Fe(III)/Fe(II) cycling mediated by L-cysteine functionalized zero-valent iron for enhancing Cr(VI) removal.

Improved Electron Efficiency of Zero-Valent Iron towards Cr(VI) Reduction after Sequestering in Al2O3 Microspheres

Highly Active Nanoscale Zero-Valent Iron (nzvi)–fe3o4 Nanocomposites for the Removal of Chromium(vi) from Aqueous Solutions

Activated carbon fiber-supported nano zero-valent iron on Cr(VI) removal

Highly Efficient Removal of Cd(II) in Aqueous Solution by Attapulgite-Loaded Amorphous Zero-Valent Iron

Ethylenediaminetetraacetic acid induces surface erosion of zero-valent iron for enhanced hexavalent chromium removal

Fast and Highly Efficient Removal of Chromate from Aqueous Solution Using Nanoscale Zero-Valent Iron/Activated Carbon (NZVI/AC)

Efficient removal of Cr(VI) by chitosan cross-linked bentonite loaded nano-zero-valent iron composite: Performance and mechanism

Effects of Co-Existing Ions and Natural Organic Matter on Removal of Chromium (vi) from Aqueous Solution by Nanoscale Zero Valent Iron (Nzvi)-Fe3o4 Nanocomposites

Reduction of Aqueous CrVI Using Nanoscale Zero-Valent Iron Dispersed by High Energy Electron Beam Irradiation.

Sulfidized Nanoiron-Loaded Carbon for Efficient Removal of Cr(VI) from Wastewater

One-step strategy for efficient Cr(VI) removal via phytate modified zero-valent iron: Accelerated electron transfer and enhanced coordination effect