Development and Field Performance Evaluation of Hole-Fertilizing Planter and Dynamic Alignment Control System for Precision Planting of Corn

Jin Gao,Fan Zhang,Junxiong Zhang,Hang Zhou,Ting Yuan

DOI: https://doi.org/10.1007/s11119-023-09988-6

IF: 5.767

2023-01-01

Precision Agriculture

Abstract:The hole fertilization is an effective means of saving fertilizer and increasing yields by applying the fertilizer needed for crop growth to a certain area below the seed during the seed fertilizing stage. In response to the current issues of low fertilizer utilization and soil non-point source pollution caused by strip fertilization, a hole-fertilizing corn planter was designed, which mainly consists of the hole-fertilizing unit, electro-driven seeding unit, and speed measuring device. A dynamic alignment control system with low cost was developed for intermittent fertilization and seeding as well as for precise alignment of the seed and fertilizer. By analyzing the movement process of the seed and fertilizer, a dynamic alignment algorithm was developed to dynamically adjust the alignment and precisely control the placement. In addition, a novel image-based fertilizer detection method was used to study the fertilizer distribution in the soil and evaluate the operating performance of the prototype in the field. Field trials were conducted to investigate the seeding quality, hole-fertilizing effect, and alignment precision of the seed and fertilizer at different operating speeds. Results indicate that (1) the feed index ( $${I}_{qf}$$ ), miss index ( $${I}_{miss}$$ ), and multiple index ( $${I}_{mult}$$ ) are 91.9%, 6.8%, and 1.3%, respectively. (2) 85.4% of the fertilizer distances are greater than 60 mm in the soil, and the amount of fertilizer applied increases progressively with increasing soil depth. (3) The mean value of the offset distances is 28.1 mm, and 94% of the offset distances are less than 50 mm. Moreover, the offset distance increases as the operating speed rises.