Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Underwater Adhesion and Curing of Superhydrophobic Coatings for Facile Antifouling Applications in Seawater

A robust, room-temperature curable and molecular-level superhydrophobic coating with excellent antibacterial and antifouling properties

Seawater-Induced Healable Underwater Superoleophobic Antifouling Coatings

Water-assisted strong underwater adhesion via interfacial water removal and self-adaptive gelation

Preparation of Durable Superhydrophobic Coatings Based on Discrete Adhesives

Coacervate-Based Instant and Repeatable Underwater Adhesive with Anticancer and Antibacterial Properties

Seaweed-inspired Underwater Anti-Oil-fouling and Anti-Fogging Coating with Mechanical Durability

Facile Fabrication of Superhydrophobic and Underwater Superoleophobic Coatings

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Durable, Self-Cleaning and Anti-Fouling Superhydrophobic Coating Based on Double Epoxy Layer

Seawater-Responsive Sio2 Nanoparticles For In Situ Generation Of Zwitterionic Polydimethylsiloxane Antifouling Coatings With Underwater Superoleophobicity

Seawater-triggered Self-Renewable Amphiphilic Coatings with Low Water Swelling and Excellent Biofilm Prevention Properties

An underwater stable superhydrophobic surface for robust ultra-long-lasting biofouling resistance

Fabrication of Robust and Repairable Superhydrophobic Coatings by an Immersion Method

A Waterborne Coating System for Preparing Robust, Self‐healing, Superamphiphobic Surfaces

Large-scale Fabrication of Waterborne Superamphiphobic Coatings for Flexible Applications

Hydrogel Antifouling Coating with Highly Adhesive Ability Via Lipophilic Monomer

Waterborne Superamphiphobic Coatings with Network Structure for Enhancing Mechanical Durability

An underwater, self-sensing, conductive composite coating with controllable wettability and adhesion behavior

Reversible, ultra-strong underwater adhesive based on supramolecular interaction for instant liquid leakage sealing and robust tissue adhesion

Fabrication of a photothermal self-repairable antifouling coating for achieving enhanced superamphiphobic durability