Abstract:[Purposes]38CrMoAl steel is often used as pistons in a hydraulic pump,its surface performance is especially important for long-life safe working.Wear is the main failure mode of pistons in a hydraulic pump.With surface strengthening treatment,it is able to break through its performance limit and realize high performance and reliable operation of a hydraulic pump.[Methods]In this work,the pattern and performance on the surface of 38CrMoAl steel has been regulated by a duplex treatment of surface texturing(ST)and active screen plasma nitriding(ASPN),aiming to achieve strengthening on its surface.Dimple texture with different shapes were first prepared on 38CrMoAl steel surface by laser processing technology.38CrMoAl steel samples with and without textured surface have been treated by ASPN.A ball-on-disc friction and wear testing machine was employed to investigate the effect of surface texture-active screen plasma nitriding duplex treatment on the tribological behavior of 38CrMoAl steel.[Findings]The results show that ASPN layer is mainly built up by the phases of e-Fe2_3N,γ'-Fe4N and CrN.The ASPN layer is compact,and free of obvious cracks and holes.Meanwhile,it is found that the uniform and continuous ASPN layer consists of a white bright layer and a diffusion layer.The hardness across surface to the inside of the ASPN layer has demonstrated a gradient distribu-tion,where the highest hardness value is detected on the surface,and the hardness decreases as the distance from the surface increases.According to the dry sliding friction results of 38CrMoAl steel related samples against Al2O3 balls,the coefficients of friction of 38CrMoAl steel and ST+ASPN-38CrMoAl steel are 0.40 and 0.36,respectively.The ST+ASPN-38CrMoAl steel pres-ents a 92.5％reduction in mass loss,as compared with 38CrMoAl steel.It can be concluded that surface texturing-active screen plasma nitriding duplex treatment endows the working surface of 38CrMoAl steel with enhanced tribological performance.

Effect of Ultrasonic Nanocrystal Treatment Combined with Nitriding Process on Fretting Wear Behavior of Textured 20crmoh Steel

Effect of Ultrasonic Nanocrystalline Surface Modification Process on Fretting Wear Behavior of Laser Surface Textured 20crmoh Steel

Effect of ultrasonic surface rolling on microstructural evolution and fretting wear resistance of 20CrMoH steel under different quenching temperatures

Study on Fretting Wear Properties of GCr15 Steel Via Ultrasonic Surface Rolling Process

Effects of Ultrasonic Surface Rolling on Fretting Wear Behaviors of a Novel 25crni2mov Steel

Synergistic Effects of a Combined Surface Modification Technology on Rolling Contact Fatigue Behaviors of 20crmoh Steel under Different Contact Stresses

Effect Of Hybrid Surface Treatment Composed Of Plasma Nitriding And W-Cr-Ti-Al-N Coating On Tribological Behavior Of Aisi 316l Steel

Rolling contact fatigue behaviors of 25CrNi2MoV steel combined treated by discrete laser surface hardening and ultrasonic surface rolling

Effect of Salt Bath Nitriding and Reoxidation Composite Texture on Frictional Properties of Valve Steel 4Cr10Si2Mo

Effect of Surface Texture-Active Screen Plasma Nitriding Duplex Treatment on Tribological Behavior of 38crmoal Steel

Effect of ultrasonic nanocrystal surface modification on the fatigue behaviors of plasma-nitrided S45C steel

Enhanced Wear Resistance of 20Cr2Ni4A Steel under Starved Lubrication Conditions via Ultrasonic Surface Burnishing Process

The Effect of Ultrasonic Nanocrystal Surface Modification on Low Temperature Nitriding of Ultra-High Strength Steel

Synergetic effect between the surface treated with ion nitriding and extreme pressure-antiwear additives under boundary lubrication

Surface nanocrystallized structural steel with enhanced tribological properties under different sliding conditions

Effect of two strengthening processes on the fretting wear mechanism of CoCrMo alloy

Synergistic Effects of Ultrasonic Rolling Textures and PTFE‐PPS/SiO2 Coatings on Dry Friction and Wear Properties of GCr15 Steel Surfaces

Surface Texturing-Plasma Nitriding Duplex Treatment for Improving Tribological Performance of AISI 316 Stainless Steel

Study on Improving Fretting Wear Properties of AISI 4135 Steel Via Diverse Surface Modifications under Grease Lubrication

Synergistic effect of surface sinusoidal textures and oxide layer on tribological properties of 40Cr alloy steel

Effects of ultrasonic nanocrystal surface modification on the surface integrity, microstructure, and wear resistance of 300M martensitic ultra-high strength steel