Abstract:In this paper, the degradation of o-DCB under different gas-phase parameter conditions was investigated using the SDBD-NTP system. The results showed that the increase in initial and oxygen concentrations had opposite effects on the degradation of o-DCB. Among them, the increase of oxygen concentration promoted the degradation of o-DCB. Relative humidity promoted and then inhibited the degradation of o-DCB. The highest degradation efficiency of o-DCB was achieved at RH = 15%, reaching 91% at 29W. In the study of by-products, it was found that O3 and NOx were the main inorganic by-products, and that different oxygen levels and relative humidity conditions had a large effect on the production of O3 and NOx. In all of them, the concentration of O3 decreased with the increase of input power. NOx increased with increasing oxygen concentration, but the increase in relative humidity inhibited the production of NO and N2O and promoted the conversion of NO2. A study of organic by-products revealed this. In the absence of oxygen, a higher number of benzene products appeared. Whereas, with the addition of oxygen, only in the by-products under conditions where no relative humidity was introduced, benzene ring products were predominantly present in the by-products. However, when RH was added, n-hexane was found to be present in the by-products. This may be because the introduction of OH• favors the destruction of the benzene ring. Finally, the possible reaction pathways and reaction mechanisms of o-DCB under different gas-phase parameters are given. It provides a reference for future related scientific research as well as scientific problems in practical applications.

Toluene degradation in air/H2O DBD plasma: A reaction mechanism investigation based on detailed kinetic modeling and emission spectrum analysis.

Removal of Dilute VOCs in Air by Post-Plasma Catalysis over Ag-based Composite Oxide Catalysts

Toluene Decomposition by a Two-stage Hybrid Plasma Catalyst System in Dry Air

VOCs degradation with non-thermal plasma and Ag-MnOx catalysis

Degradation of Thiamethoxam in Water by the Synergy Effect Between the Plasma Discharge and the Tio2 Photocatalysis

Experimental and kinetic modeling study of tar partial oxidative reforming by dielectric barrier discharge plasma using toluene as a model compound

The Roles of Various Plasma Active Species in Toluene Degradation by Non-thermal Plasma and Plasma Catalysis

Characteristics of Back Corona Discharge in a Honeycomb Catalyst and Its Application for Treatment of Volatile Organic Compounds.

Decomposition of gaseous toluene using a continuous flow discharge plasma reactor with new configurations

Performance and mechanism analysis of degradation of toluene by DBD plasma-catalytic method with MnOx/Al2O3 catalyst

Degradation of Benzene by a Falling Film Gas–Liquid Phase DBD Plasma with Persulfate

Double dielectric barrier discharge incorporated with CeO2-Co3O4/γ-Al2O3 catalyst for toluene abatement by a sequential adsorption–discharge plasma catalytic process

Plasma-catalytic oxidation of toluene over MCeZrO x /TiO 2 (M = Cu, Mn, Ni and Co) catalysts using a dielectric barrier discharge reactor

High energy efficient degradation of toluene using a novel double dielectric barrier discharge reactor

Synergetic Effect Between Plasma and Uv for Toluene Conversion in Integrated Combined Plasma Photolysis Reactor with Krcl/Krbr/Xecl/Xe-2 Excilamp

Decomposition of Toluene in A Rotating Glidarc Discharge Reactor

Effect of gas components on the degradation mechanism of o-dichlorobenzene by non-thermal plasma technology with single dielectric barrier discharge

Toluene decomposition by DBD-type plasma combined with metal oxide catalysts supported on ferroelectric materials

Toluene Decomposition by Non-Thermal Plasma Assisted 2d Coox/Al2o3: the Relative Contributions of Specific Energy Density of Plasma, Co 3+ and Oxygen Vacancy

In-plasma Catalytic Degradation of Toluene over Different MnO 2 Polymorphs and Study of Reaction Mechanism

Study on the parameters of non-thermal plasma degradation process based on the combination of simulation and experiment