Innovative Electrochemical Biosensor with Nitrifying Biofilm and Nitrite Oxidation Signal for Comprehensive Toxicity Detection in Tuojiang River.

Jingting Wang,Chong Dong,Qiquan Li,Xu Yang,Daping Li,Lixia Zhang,Yifeng Zhang,Guoqiang Zhan

DOI: https://doi.org/10.1016/j.watres.2023.119757

IF: 12.8

2023-01-01

Water Research

Abstract:Water toxicity detection, as a valuable supplement to conventional water quality measurement, is an important method for evaluating water environmental quality standards. However, the toxicity of composite pollutants is more complicated due to their mixture effects. This study developed a novel, rapid and interference-resistant detection method for water toxicity based on an electrochemical biosensor using peak current from nitrite oxidation as a signal. Toxicants could weaken the characteristic peak current of nitrite to indicate the magnitude of toxicity. The proof-of-concept study was first conducted using a synthetic water sample containing tri-chloroacetic acid (TCAA), and then the results were compared with those of the traditional toxicity colorimetric method (CCK-8 kit) and laser confocal microscopy (CLSM). The accuracy of the biosensor was further verified with water samples containing individual pollutants such as Cd2+ (50-150 mu g/L), Cr6+ (20-80 mu g/L) mixture, triclosan (TCS; 0.1-1.0 mu g/L) and TCAA (10-80 mu g/L), or a mixture of the above. The viability of the sensor was further validated with the actual water sample from the Tuojiang River. The results demonstrated that although the concentration of a single conventional pollutant in water did not exceed the discharge standard for surface water, the comprehensive toxicity of natural water should not be ignored. This method could be a beneficial supplement to conventional water quality detection to understand the characteristics of the water, and thus contribute to the next stage of water treatment.