Ion-Exchange Separators Suppressing Self-Discharge in Polymeric Supercapacitors
Kaiping Wang,Lulu Yao,Mehran Jahon,Jiaxi Liu,Matthew Gonzalez,Ping Liu,Vincent Leung,Xinyu Zhang,Tse Nga Ng
DOI: https://doi.org/10.1021/acsenergylett.0c01783
IF: 22
2020-09-29
ACS Energy Letters
Abstract:Supercapacitors offer superior cycle life and high power densities, but as energy storage devices, they are limited by self-discharge processes manifested as large potential decay and leakage current, resulting in loss of stored energy and low charging efficiency. To minimize Faradaic side reactions, this Letter has incorporated a sulfonate ion-exchange resin in separators to trap impurities and thereby suppress self-discharge in supercapacitors with PEDOT as redox electrodes. The versatile separator design is generally applicable to organic and aqueous electrolytes and compatible with a pH range of 0–14, while maintaining the device capacitance and rate performance. Temperature-dependent characteristics were analyzed to identify that the reduction of impurity concentration and diffusion was key to improve potential retention. Compared to devices using commercially available separators, the device here exhibited a lower leakage current and better charging efficiency. It was demonstrated to work with radio frequency energy-harvesting circuits and showed the potential to serve as an energy reservoir for wireless electronic applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.0c01783?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.0c01783</a>.(1) Scanning electron microscopy images; (2) GCD curves and SDC characteristics of supercapacitors based on PP, sPS, and sPS+PP; (3) SDC characteristics after adding different concentrations of transition-metal ions as impurities into the electrolyte; (4) SDC characteristics of sPS in different electrolytes; (5) GCD curves at current density from 1 uA to 100 uA; (6) leakage current comparison with commercial supercapacitors; (7) equipment and circuits for RF charging process; (8) fitting results of the SDC process at different temperatures (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.0c01783/suppl_file/nz0c01783_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry