Abstract:A series of Polyaniline (PANI) nanofibers were prepared as conductive filler. The polyvinyl alcohol (PVA)/agarose (AG) double network hydrogel was used as flexible substrate. PANI/PVA/AG conductive hydrogel was prepared by in-situ polymerization of polyaniline nanofibers in PVA/AG double network hydrogel. The electrochemical performance of the PANI/PVA/AG hydrogel electrode material was linked to the fiber morphology of polyaniline. The doping of polyaniline with 0.020 mol/L citric acid demonstrated superior fiber morphology compared to doping with other citric acid concentrations, achieving fiber ratios of 80%. The specific capacitance of the PANI/PVA/AG hydrogel electrode materials doped with 0.020 mol/L citric acid was 285 mF/cm2, while the conductivities was 7.1 S/m. The doping of polyaniline with 0.5 mol/L hydrochloric acid demonstrated superior fiber morphology compared to doping with other hydrochloric acid concentrations, achieving fiber ratios of 65%. The specific capacitance of the PANI/PVA/AG hydrogel electrode materials doped with 0.5 mol/L hydrochloric acid was 249 mF/cm2, while the conductivities was 7.6 S/m. After 500 cycles of charge-discharge, the specific capacitance retention of the material was 73%. Photosensitivity tests indicated that the hydrogel exhibited high sensitivity to shorter wavelengths of blue light (460 nm) and ultraviolet light (380 nm). The hydrogel sensor had a high sensitivity to the strain in the range of 0% to 120%. The Gauge factors (GF) of the hydrogel strain sensor were 1.280, 2.141, 1.907, and 1.261 for strain ranges of 0% to 30%, 30% to 60%, 60% to 90%, and 90% to 120%, respectively. The cyclic strain tensile tests indicated that the relative resistance change rate (ΔR/R0) of the hydrogel sensor demonstrated a certain degree of repeatability and stability within the range of 0% to 100%. Thus, the hydrogel sensor has reliability and stability in the signal transmission process of detecting human movement as a flexible strain sensor. These results suggest that the PANI/PVA/AG conductive hydrogel is a multifunctional composite with good electrochemical storage performance, photosensitivity, and strain sensitivity, which can be applied to applications such as supercapacitors, flexible sensors and electronic wearable devices.

3D Print Polyaniline/Gelatin Hydrogels As Wearable Multifunctional Sensors

Lignosulfonate-doped polyaniline-reinforced poly(vinyl alcohol) hydrogels as highly sensitive, antimicrobial, and UV-resistant multifunctional sensors

Bifunctional polyaniline electroconductive hydrogels with applications in supercapacitor and wearable strain sensors

A Strand Entangled Supramolecular PANI/PAA Hydrogel Enabled Ultra‐Stretchable Strain Sensor

Multifunctional polyaniline nanofibers conductive hydrogel for supercapacitors and flexible sensors

Natural Glycyrrhizic Acid-Tailored Homogeneous Conductive Polyaniline Hydrogel as a Flexible Strain Sensor

Highly Stretchable, Ultra‐Soft, and Fast Self‐Healable Conductive Hydrogels Based on Polyaniline Nanoparticles for Sensitive Flexible Sensors

Lignin-Based Conductive Hydrogels with Plasticity, Recyclability, and Self-Adhesion As Flexible Strain Sensors for Human Motion Monitoring

Highly conductive and sensitive acrylamide-modified carboxymethyl cellulose/polyvinyl alcohol composite hydrogels for flexible sensors

Hybrid nano-microstructured and bioinspired conductive hydrogels with tunable multifunctionality

Dual-network polyacrylamide/carboxymethyl chitosan-grafted-polyaniline conductive hydrogels for wearable strain sensors

Flexible Strain Sensor Based on a Dual Crosslinked Network of PAMgA/GL/PANI Antifreeze Conductive Hydrogel

A transparent, self-adhesive and fully recyclable conductive PVA based hydrogel for wearable strain sensor

Bioinspired 3D Printable, Self-Healable, and Stretchable Hydrogels with Multiple Conductivities for Skin-like Wearable Strain Sensors

Multifunctional sodium lignosulfonate/xanthan gum/sodium alginate/polyacrylamide ionic hydrogels composite as a high-performance wearable strain sensor

3D Printed Silk Fibroin‐Based Hydrogels with Tunable Adhesion and Stretchability for Wearable Sensing

Tannic acid-Fe3+ activated rapid polymerization of ionic conductive hydrogels with high mechanical properties, self-healing, and self-adhesion for flexible wearable sensors

A Flexible Nylon-Spandex Fabric-Supported PVA/PANI Hydrogel Sensor with High Strength and Conductivity

Highly conductive and tough polyacrylamide/sodium alginate hydrogel with uniformly distributed polypyrrole nanospheres for wearable strain sensors

PVA/gelatin/β-CD-based rapid self-healing supramolecular dual-network conductive hydrogel as bidirectional strain sensor

Triple physical cross-linking cellulose nanofibers-based poly(ionic liquid) hydrogel as wearable multifunctional sensors