Abstract:An efficient catalytic system was developed to remove various organic pollutants by simultaneously using low-level cobalt ions, calcium carbonate micro -particles and peroxymonosulfate (PMS). A simple base -induced precipitation was used to successfully loaded Co -centered reactive sites onto the surface of CaCO 3 microparticles. Under optimal conditions at 25 degrees C, 10 mg/L methylene blue (MB) could be completely degraded within 10 min with 480 pg/L Co 2 + , 0.4 g/L CaCO 3 microparticles (or 0.4 g/L Co@CaCO 3 ) and 0.1 g/L PMS. The MB degradation followed the pseudo first order kinetics with a rate constant of 0.583 min -1 , being 8.3, 11.5 and 53.0 times that by using Co -OH (0.07 min -1 ), Co 2 + (0.044 min -1 ) and CaCO 3 (0.011 min -1 ) as the catalyst, respectively. It was confirmed that there was a synergistic effect in the catalytic activity between Co species and the CaCO 3 particles but the major contributor was the highly dispersed Co species. When Co 2 + -containing simulated electroplating wastewater was used as the Co 2 + source, not only the added MB was also completely degraded within 5 min in this catalytic system, but also the coexisting heavy metal ions were substantially removed. The presently developed method was applied to simultaneously treat organic wastewater and heavy metals wastewater. The present method was also successfully used to efficiently degrade other organic pollutants including bisphenol A, sulfamethoxazole, rhodamine B, tetrabromobisphenol A, ofloxacin and benzoic acid. A catalytic mechanism was proposed for the PMS activation by Co@CaCO 3 . The surface of CaCO 3 particles favors the adsorption of Co 2 + . More importantly, the surface of CaCO 3 particles provides plentiful surface -OH and -CO 3 2 + , and these surface groups complex with Co 2 + to produce more catalytically active species such as surface [CoOH] - , resulting in rapid Co 2 + / Co 3 + cycling and electron transfer. These interactions cause the observed synergistic effect between Co species and CaCO 3 particles in PMS activation. Due to good cycle stability, strong anti -interference ability and wide universality, the new method will have broad application prospects. (c) 2024 The Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V.

Significant Roles of Surface Functional Groups and Fe/Co Redox Reactions on Peroxymonosulfate Activation by Hydrochar-Supported Cobalt Ferrite for Simultaneous Degradation of Monochlorobenzene and P-Chloroaniline.

Heterogeneous Activation of Peroxymonosulfate by Fe-Co Layered Doubled Hydroxide for Efficient Catalytic Degradation of Rhoadmine B

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Enhancing Peroxymonosulfate Activation by Co-Fe Layered Double Hydroxide Catalysts Via Compositing with Biochar

Hydrothermally assisted synthesis of nano zero-valent iron encapsulated in biomass-derived carbon for peroxymonosulfate activation: The performance and mechanisms for efficient degradation of monochlorobenzene

Facile synthesis of CoFe2O4@BC activated peroxymonosulfate for p-nitrochlorobenzene degradation: Matrix effect and toxicity evaluation

In situ synthesis of CoFe-LDH on biochar for peroxymonosulfate activation toward sulfamethoxazole degradation: Cooperation of radical and non-radical pathways

Cobalt Nanoparticles Supported on Porous Carbon Nanofiber As Efficient Catalyst for Heterogeneous Activation of Peroxymonosulfate Towards the Degradation of Organic Pollutants

Amorphous Co3O4 nanoparticles-decorated biochar as an efficient activator of peroxymonosulfate for the removal of sulfamethazine in aqueous solution

Relying On The Non-Radical Pathways For Selective Degradation Organic Pollutants In Fe And Cu Co-Doped Biochar/Peroxymonosulfate System: The Roles Of Cu, Fe, Defect Sites And Ketonic Group

Bimetallic and Nitrogen Co-Doped Biochar for Peroxymonosulfate (PMS) Activation to Degrade Emerging Contaminants

Degradation of Organic Contaminants in the CoFe2O4/peroxymonosulfate Process: the Overlooked Role of Co(II)-PMS Complex

Activation of peroxymonosulfate by magnetic Fe3S4/biochar composites for the efficient degradation of 2,4,6-trichlorophenol: Synergistic effect and mechanism

Synergistic coupling Co 3 Fe 7 alloy and CoFe 2 O 4 spinel for highly efficient removal of 2,4-dichlorophenol by activating peroxymonosulfate.

Fe and Zn co-doped carbon nanoparticles as peroxymonosulfate activator for efficient 2,4-dichorophenol degradation

Co Nanoparticles Anchored N, B, F Codoped Carbon As an Efficient Peroxymonosulfate Activator for Rapid Catalytic Degradation of Organic Pollutants

Highly efficient activation of peroxymonosulfate by cobalt ferrite anchored in P-doped activated carbon for degradation of 2,4-D: Adsorption and electron transfer mechanism

Efficient Activation of Peroxymonosulfate for Catalytic Degradation of Organic Pollutants by Simultaneously Using Low-Level Cobalt Ions and Calcium Carbonate Micro-Particles

PMS Activation by Magnetic Cobalt-N-doped Carbon Composite for Ultra-Efficient Degradation of Refractory Organic Pollutant: Mechanisms and Identification of Intermediates.

Fe@C Activated Peroxymonosulfate System for Effectively Degrading Emerging Contaminants: Analysis of the Formation and Activation Mechanism of Fe Coordinately Unsaturated Metal Sites

Highly efficient peroxymonosulfate activation by CoFe 2 O 4 @attapulgite–biochar composites: Degradation properties and mechanism insights