Abstract:In the acceptance process of newly developed five-axis machine tools (FAMTs), it is urgent for machine tool builders to understand the main causes of machining defects on S-shaped test piece. This paper proposes a novel causation analysis method based on error spatial morphology of S-shaped test piece to decouple the key geometric error parameters causing contour errors of test piece. Firstly, based on multi-body system (MBS) theory, tool axis surface error model of a FAMT is set up. In order to eliminate the effect of theoretical error on contour error of S-shaped test piece, the optimized tool path is planned based on the three-point tangential method. Then, the NC instruction is calculated, and error spatial model is established to characterize contour error of the test piece by considering tool setting position. As a basis, error spatial morphologies of test piece are drawn and the relationships between geometric error parameters and error spatial morphologies are analyzed. In order to decouple the key geometric error parameters affecting contour error of test piece, the causation analysis method of local error and global error are presented. After repairing the local and global key error parameters of the test piece obtained from these two analysis methods respectively, the local machining errors are reduced by more than 80%, and the global machining error is not beyond the tolerance. Finally, the cutting experiments of S-shaped test piece on the FAMT XKAS2525 × 60 are implemented. Error detection results of the cutting test piece are basically the same as that shown in error spatial morphologies of test piece, which verifies the correctness of error spatial model for the test piece. After compensating the global key error parameters obtained from the causation analysis method of global error in CNC system, the detection results of re-cutting test piece under the same conditions indicate the test piece has very few points that are not within the tolerance range, and detection results after compensation and global repaired results are almost similar, which verifies the feasibility and correctness of the proposed analysis method. Therefore, it is obvious that the presented method bridges between geometric characteristics of S-shaped test piece, geometric errors of machine tool, and machining defects of test piece and provides a comprehensive error analysis method in the acceptance and performance testing of FAMTs by using the S-shaped test piece. Thus, this study is of great significance for improving the accuracy evaluation method and enhancing the design accuracy of FAMTs.

Separating Machining Errors of S-shaped Samples Based on the Comprehensive Error Field of Five-Axis Machine Tools

Volumetric error modeling and decoupled error compensation analysis of five-axis CNC machine tools

Comprehensive analysis and evaluation of the geometric errors of the rotating axis of five-axis double-pendulum machine tools based on S-shaped samples

Identification of Kinematic Errors of Five-Axis Machine Tool Trunnion Axis from Finished Test Piece

F Test-Based Automatic Modeling of Single Geometric Error Component for Error Compensation of Five-Axis Machine Tools

Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement

A New Synthesis Error Modeling and Compensating Algorithm of the Five-axis Machine Tools

Geometric accuracy enhancement of five-axis machine tool based on error analysis

Modeling and analysis of axial thermal error in machining space of double-swing five-axis machine tool

An Approach to Enhancing Machining Accuracy of Five-Axis Machine Tools Based on a New Sensitivity Analysis Method

A method of sensitivity analysis and precision prediction for geometric errors of five-axis machine tools based on multi-body system theory

An Accurate Characterization Method to Tracing the Geometric Defect of the Machined Surface for Complex Five-Axis Machine Tools

A Novel Causation Analysis Method of Machining Defects for Five-Axis Machine Tools Based on Error Spatial Morphology of S-shaped Test Piece

An Approach for Improving Machining Accuracy of Five-Axis Machine Tools

Modeling of Compound Errors for CNC Machine Tools

An Identifying Method with Considering Coupling Relationship of Geometric Errors Parameters of Machine Tools

Study on the Thermally Induced Spindle Angular Errors of a Five-Axis CNC Machine Tool

An efficient method for measuring and identifying geometric and dynamic errors in dual five-axis machine tools

An Error Compensation Method for Multi-Axis Machining Based on the Actual Contour Measurement

A Geometric Error Tracing Method Based on the Monte Carlo Theory of the Five-Axis Gantry Machining Center

Separation and Compensation of Geometric Errors of Rotary Axis in 5-Axis Ultra-Precision Machine Tool by Empirical Mode Decomposition Method