A Study of Superstructure Hf6Ta2O17 Ceramics for Electrochemical Energy Storage Applications

Yufeng Xue,Yi Cao,Piao Ruan,Munan Lu,Fenhua Chen,Weijian Han,Wenfeng Qiu

DOI: https://doi.org/10.1039/d2se01497a

IF: 6.813

2023-01-01

Sustainable Energy & Fuels

Abstract:Introducing oxygen vacancies into the superstructure HTO ceramic to improve its electrochemical energy storage performance.

What problem does this paper attempt to address?

Understanding Thermochemical Energy Storage Performance of Ba1-Sr CoO3- Perovskite System: A Computational and Experimental Study

Peng Yuan,Haoran Xu,Zeyu Ning,Gang Xiao

DOI: https://doi.org/10.1016/j.est.2023.106695

IF: 9.4

2023-01-01

Journal of Energy Storage

Abstract:Concentrated solar power coupled with thermochemical energy storage (TCES) has emerged as an effective approach for renewable energy utilization. TCES based on perovskites attracts much attention because of temperature tunability and high flexibility. In this work, the electronic structures are simulated by the density functional theory (DFT) method, revealing the reduction temperatures is related to the formation energy of oxygen vacancy (Evac). The compounds of Ba1-xSrxCoO3-delta with x = 0-1 are synthesized and investigated by experimental methods. According to the results, Ba content improves the redox capacities and reaction kinetics, while Sr content expands the reaction temperatures and enhances the micro morphologies. In addition, all the samples present a greater reversibility after 150 cycles, because the extended pores are beneficial to the oxygen diffusion. Overall, Ba0.5Sr0.5CoO3-delta is suggested as a suitable TCES material with a reaction enthalpy of 202.20 kJ kg-1. This study provides a design principle of composite perovskites for thermochemical energy storage.
Performance Enhancement of Hf-Ta-O Nanofiber Based Energy Storage Materials Using Oxygen-Vacancy and Its Application for Supercapacitor

Yi Cao,Piao Ruan,YuFeng Xue,Yue Cao,Huang He,Wenfeng Qiu

DOI: https://doi.org/10.1016/j.jallcom.2023.170542

IF: 6.2

2023-01-01

Journal of Alloys and Compounds

Abstract:Nowadays, materials that possess high activity and natural oxygen vacancy have garnered significant at-tention as potential electrode materials for supercapacitors. In this study, we successfully prepared the Hf6Ta2O17 (HTO) nanofibres (NFs) with an orthorhombic superlattice structure using the electrospinning technique and sintering process. The characterization results indicate that the HTO NFs synthesized at 750 degrees C show good micro nanostructures and outstanding electrochemical properties. To enhance its energy storage performance, additional oxygen vacancies (OVs) were introduced through a carbothermal treatment under an Ar atmosphere. Although longer reduction reaction times can produce more OVs, the integration of grain boundaries and the growth of grain size caused by large annealing times may limit its electro-chemical performance. Therefore, the HTO NFs treated for 1 h (HTO/C-1) exhibited the maximum Cs of 925 F center dot g-1 at 1 A center dot g-1 with a larger voltage window of 2.1 V. Furthermore, a symmetric supercapacitor fab-ricated by two reduced HTO NFs electrodes and 1 M Na2SO4 solution, recorded as r-HTO NFs//r-HTO NFs. The device demonstrated excellent energy density of 73.3 Wh center dot kg-1 (at power density of 1050 W center dot kg-1) and a long cycling life (81.8% retained after 5000 cycles). These results suggest that the optimized reduction process can provide appropriate oxygen vacancies in HTO NFs, thereby effectively enhancing its perfor-mance.(c) 2023 Elsevier B.V. All rights reserved.
Superior Energy Storage Performance of BiFeO3-BaTiO3-CaHfO3 Lead-Free Ceramics

Jianwei Zhao,Hongtian Li,Yuxiao Du,Xiaoxin Chen,Hailan Qin,Jinming Wang,Tingnan Yan,Shuhui Yu,Yongming Hu,Dawei Wang

DOI: https://doi.org/10.1039/d4ta00022f

IF: 11.9

2024-01-01

Journal of Materials Chemistry A

Abstract:Lead-free ceramics have received considerable research interest because of their environmentally friendly characteristics and superb performance in energy storage applications, which are critical for pulsed power electronic systems. In this work, we sintered a series of (0.90 - x)BiFeO3-xBaTiO(3)-0.10CaHfO(3) lead-free ceramics and comprehensively probed the crystallographic structure, grain morphology, electrical properties, etc., to assess their capability for use in energy storage applications. The 0.50BiFeO(3)-0.40BaTiO(3)-0.10CaHfO(3) ceramic achieved an ultrahigh recoverable energy storage density of 4.70 J cm(-3) and an outstanding energy conversion efficiency of 79% and can be considered an excellent material candidate for use in high-power energy storage devices.
Improved Energy Storage Performance of Ba0.4Sr0.6TiO3 Nanocrystalline Ceramics Prepared by Using Oxalate Co-Precipitation and Spark Plasma Sintering

Yu Hui Huang,Bing Liu,Juan Li,Yong Jun Wu

DOI: https://doi.org/10.1016/j.materresbull.2019.01.029

IF: 5.6

2019-01-01

Materials Research Bulletin

Abstract:The oxalate co-precipitation method was employed to synthesize nanocrystalline Ba0.4Sr0.6TiO3 having an average particle size of 100 nm. The conventional sintering (CS) and spark plasma sintering (SPS) methods were used to fabricate Ba0.4Sr0.6TiO3 ceramics with different microstructures. The SPS sample presented uniformly dense microstructure and ultrafine grains, while abnormal grain growth and some pores were discerned in the CS sample. The differences in microstructure significantly affected the dielectric properties and energy storage performance of the ceramics. The dielectric constant of the SPS sample was high (epsilon' (similar to)1200), its dielectric loss was low (tan delta (similar to)0.003), and the sample presented diffuse phase transition and high breakdown strength (E-b = 260 kV/cm) at room temperature. Compared with the CS sample, the maximum energy storage density and energy storage efficiency of the SPS sample were increased from 0.61 to 1.20 J/cm(3) and 72.6% to 91.6%, respectively. All results revealed that SPS is a powerful technique to produce dense ceramics with high energy storage performance.
Hf6Ta2O17/Ta2O5 composite ceramic: A new eutectic system

Hao Li,Yiping Yu,Bing Fang,Peng Xiao,Song Wang

DOI: https://doi.org/10.1016/j.ceramint.2022.01.230

IF: 5.532

2022-05-01

Ceramics International

Abstract:Eutectic oxides are considered as the most promising candidates applied in extreme environment for long periods, and the pace of exploring new eutectic systems has never stopped. In the present work, Hf6Ta2O17/Ta2O5 eutectic system is firstly prepared by the joint process of solvothermal method and spark plasma sintering (SPS). Eutectic liquid phase produced during the process of SPS fills the closed-pores and promotes the sintering process. Orthorhombic-Hf6Ta2O17 and tetragonal-Ta2O5 of both eutectic and hypereutectic systems show single crystal characteristics and are combined by coherent interface instead of grain boundaries. The clean and flat interface also shows the characteristics of single crystal diffraction without impurities and amorphous phase. Based on the analysis of microstructure, the sintering mechanism is proposed, and the potential application of Hf6Ta2O17/Ta2O5 eutectic system is analyzed.

materials science, ceramics
Improving energy storage performance enabled by composition-induced dielectric behavior in PbHfO3-based ceramics under low electric fields

Wenna Chao,Jigong Hao,Juan Du,Peng Li,Wei Li,Tongqing Yang

DOI: https://doi.org/10.1039/d4tc02538e/v1/review3

IF: 6.4

2024-08-21

Journal of Materials Chemistry C

Abstract:Antiferroelectric ceramics with high energy storage performance at low electric fields appear to be particularly important to meet the requirements of miniaturized devices with a high level of integration. In this work, Ti-doped PbHfO 3 antiferroelectric ceramics were fabricated via a solid-state method. The PbHf 0.99 Ti 0.01 O 3 bulk ceramics exhibit excellent energy storage performance ( W rec = 5.49 J cm −3 at 200 kV cm −1 ) and high property stability (<5% over 20 °C–120 °C and 1–100 Hz), accompanied by the stabilization of the ferroelectric state. Based on the results of XRD refinement and numerical study, we found that the enlarged displacement space of B-site cations accounts for the enhanced polarization at a low electric field. PbHf 0.09 Ti 0.01 O 3 ceramics exhibited giant potential in energy storage applications at low electric fields.

materials science, multidisciplinary,physics, applied
Optimized energy storage performance in (Ba0.8Sr0.2)TiO3-based ceramics via Bi(Zn0.5Hf0.5)O3-doping

Jiajia Ren,Diming Xu,Qianqian Ma,Da Li,Weichen Zhao,Zhentao Wang,Tao Zhou,Wenfeng Liu,Di Zhou

DOI: https://doi.org/10.1039/d4tc00603h

IF: 6.4

2024-03-30

Journal of Materials Chemistry C

Abstract:Because of high voltage resistance and high-power density, traditional ceramic dielectrics have found extensive use in electronic and pulsed power systems. Nevertheless, their subpar energy storage capabilities pose a challenge in meeting the demands of integrated and lightweight power electronic devices. This paper employs compositional design to incorporate a Bi(Zn0.5Hf0.5)O3 (BZH) relaxation component, aiming to enhance the electrical breakdown strength or effective dielectric constant, ultimately increasing the energy storage density. The 0.90(Ba0.8Sr0.2)TiO3-0.10Bi(Zn1/2Hf1/2)O3 ceramics processed by the conventional solid-phase reaction method demonstrate a significant recoverable energy density of 4.20 J/cm3, a exceptional energy storage efficiency of 95.5%, with 450 kV/cm high breakdown strength and impressive charge/discharge performance. This investigation presents a novel framework for enhancing energy storage performance in other material systems.

materials science, multidisciplinary,physics, applied
Oxygen vacancies on the surface of HxWO3−y for enhanced charge storage

Haiyan Wang,Ruxue Fan,Jingyu Miao,Jiayi Chen,Shanjun Mao,Jiang Deng,Yong Wang

DOI: https://doi.org/10.1039/c8ta00981c

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:The dominant role of surface oxygen vacancies (OVs) in improving energy storage is underscored by comparing the OV-mediated charge storage performance of surface and bulk defective HxWO3-y with that of WO3 and bulk defective e-HxWO3-y. It shows that surface OVs are key hot spots for faradaic reactions in HxWO3-y, which promotes the formation of certain W5+ and W4+ during the reduction process.
Optimizing High-Temperature Energy Storage in Tungsten Bronze-Structured Ceramics Via High-Entropy Strategy and Bandgap Engineering

Yangfei Gao,Zizheng Song,Haichao Hu,Junwen Mei,Ruirui Kang,Xiaopei Zhu,Bian Yang,Jinyou Shao,Zibin Chen,Fei Li,Shujun Zhang,Xiaojie Lou

DOI: https://doi.org/10.1038/s41467-024-50252-w

IF: 16.6

2024-01-01

Nature Communications

Abstract:Abstract As a vital material utilized in energy storage capacitors, dielectric ceramics have widespread applications in high-power pulse devices. However, the development of dielectric ceramics with both high energy density and efficiency at high temperatures poses a significant challenge. In this study, we employ high-entropy strategy and band gap engineering to enhance the energy storage performance in tetragonal tungsten bronze-structured dielectric ceramics. The high-entropy strategy fosters cation disorder and disrupts long-range ordering, consequently regulating relaxation behavior. Simultaneously, the reduction in grain size, elevation of conductivity activation energy, and increase in band gap collectively bolster the breakdown electric strength. This cascade effect results in outstanding energy storage performance, ultimately achieving a recoverable energy density of 8.9 J cm−3 and an efficiency of 93% in Ba0.4Sr0.3Ca0.3Nb1.7Ta0.3O6 ceramics, which also exhibit superior temperature stability across a broad temperature range up to 180 °C and excellent cycling reliability up to 105. This research presents an effective method for designing tetragonal tungsten bronze dielectric ceramics with ultra-high comprehensive energy storage performance.
Multi-scale Collaborative Optimization of SrTiO3-based Energy Storage Ceramics with High Performance and Excellent Stability

Lulu Liu,Yang Liu,Jigong Hao,Jianwen Chen,Peng Li,Song Chen,Peng Fu,Wei Li,Jiwei Zhai

DOI: https://doi.org/10.1016/j.nanoen.2023.108275

IF: 17.6

2023-01-01

Nano Energy

Abstract:SrTiO3 (ST)-based ceramics are considered as promising candidates for energy storage applications. However, the low polarization intensity in ST-based materials limits their energy storage performance, rendering materials that usually exhibit a low recoverable energy-storage density. In the present study, we have optimized the energy storage performance of ST-based ceramics by using a combined optimization strategy of structural engineering and microstructural regulation. High performance (Sr1-x-y-2 phi NayBixCa phi square(phi))TiO3 (abbreviated as zSNBCT, where square represents the Sr vacancies) ceramics were thereby designed. During composition optimization, the phase state of zSNBCT was adjusted to a critical point where the relaxor ferroelectric-paraelectric phase transition occurred around room temperature. It thus induced a strong relaxation behavior with the formation of ferroelectric polar nano-regions, yielding a high recoverable energy-storage density (W-rec) of similar to 6 J/cm(3) and a high energy-storage efficiency (eta) of similar to 92% under a large breakdown electric field of 440 kV/cm, for z = 0.2 sample. Moreover, the breakdown strength (BDS) of the 0.2SNBCT ceramic was further improved by adopting a two-step sintering and spark plasma sintering approach for the microstructural refinement. Simulation models containing grains and grain boundaries were well established using phase-field simulation and finite element analysis. These simulations came to a similar conclusion for the enhanced BDS. Namely, the fine-grained microstructure significantly hindered the growth of breakdown cracks under an applied electric field. Most importantly, the 0.2SNBCT sample showed excellent frequency stability (1-1000 Hz), thermal stability (20-140 degrees C), and cycling stability (10(5) cycles), rendering it a promising candidate for energy storage systems. Our designed strategy of structural engineering and microstructural regulation may provide a new paradigm for the design of high-performance energy storage ceramics for pulse power applications.
Synthesis of Oxygen Vacancies-Enriched Titanate Nanostructures and Their Potassium Storage Properties Study

Bohao Liang,Guangfu Zu,Yonghui Li,Xinyi Wang,Chunyuan Song,Zhendong Huang,Xiao Huang,Lijun Yang,Shaozhou Li

DOI: https://doi.org/10.1016/j.jallcom.2024.174568

IF: 6.2

2024-01-01

Journal of Alloys and Compounds

Abstract:The commonly adopted high-temperature calcination prior to electrode fabrication decreases the electrochemical activities of titanium-based layered oxides, a class of promising electrode materials with low cost and decent performance, through their microsctructure aggregations and interlayer spacing contractions. Here we present a low temperature method for generating abundant oxygen vacancies in K2Ti2O5 nanostructures (referred to as ov-KTO) as the electrode material to overcome this limitation. The rich vacancy in ov-KTO nanomaterial contributes increased interlayer spacing and heightened electrical conductivity compared to the bulk counterpart. It also causes a significance of redox Ti3+/Ti4+ reaction for ov-KTO in water-in-salt electrolyte. These advancements lead us to construct a high-performance ov-KTO//active carbon assembled aqueous hybrid supercapacitor. The device shows large working voltage window, impressive energy density, long lifespan and wide operation temperature, demonstrating its comparable with the aprotic-electrolyte supercapacitor in performance but being safer and more cost-effective.
Structure Regulation and Performance Optimization Mechanism of Sr0.7Bi0.2TiO3-based Energy Storage Ceramics Based on Charged Defect Design Engineering

Peng Zhao,Jingjing Chen,Kui Chen,Yidi Shen,Yubin Liu,Yongjia Zhang,Yongzhen Wang,Qi An,Bin Tang

DOI: https://doi.org/10.1016/j.cej.2024.156673

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:The linear-like relaxor ferroelectric Sr0.7Bi0.2TiO3 with regulable microstructure offers a new platform to reveal the essential mechanism of energy storage properties improvement and develop advanced pulse capacitors. Herein, Li with relatively weak volatility accompanied by Bi was introduced in Sr0.7Bi0.2TiO3 to form a charged defect and increase the maximum polarization (Pmax) while avoiding the deterioration of dielectric breakdown strength (BDS). The occupation of Li and the formation of Li-Bi defect dipole polar were analyzed using first principle calculations. A unique local superlattice induced by the lattice distortion was first observed in related systems. The Pmax was enhanced due to the increased size and number of polar structures. The breakdown behaviour and local electric field distribution were analyzed using numerical simulation. The BDS was improved due to the decreased oxygen vacancies, high thermal conductivity and enhanced electrical insulation. The excellent and stable energy storage performance was achieved in different temperatures, frequencies and cycles. Meanwhile, the optimized sample possesses excellent and stable charge-discharge properties, especially fatigue resistance (105 cycles under 25 degrees C and 150 degrees C). After the process optimization, the sample shows a higher energy storage density of 3.44 J/cm3 with a high efficiency of 93.74 % at 345 kV/cm due to the further enhanced BDS. In this work, the performance improvement mechanism was studied in-depth, providing a new strategy for optimizing linear-like lead-free relaxor ferroelectric energy storage properties.
Properties and Microstructure of Ultrafine-Crystalline BaTiO3-based Energy Storage Ceramics

LIU Bai-bo,WANG Xiao-hui,LI Long-tu

DOI: https://doi.org/10.13374/j.issn2095-9389.2017.06.012

2017-01-01

Abstract:Al2 O3 , SiO2 and ZnO were coated around nano-sized BaTiO3 particles by means of aqueous chemical coating. Then, BaTiO3-based energy storage ceramic material with average grain size of 120 nm was fabricated by the two-step sintering method. The coating layer can restrain grain growth and abnormal grain growth, and can enhance significantly the AC breakdown strength of the ma-terial to over 150 kV·cm-1 , while providing energy density of 0. 829 J·cm-3 . Energy-dispersive spectroscopy proves the gathering of doping elements near grain boundaries, thus indicating the existence of a core-shell structure. High-temperature impedance spectrosco-py and fitting results further explain that the energy storage properties were improved. Although the energy density of this ultrafine-crystalline ceramic material is moderate, the advantages of fine grains and low sintering temperature make it possible for the material to be used in multilayer ceramic capacitors, which can increase energy storage by orders of magnitude. This improvement is impossible to achieve with conventional energy storage ceramics.
Bi(Mg0.5Hf0.5)O3-modified SrTiO3 Lead-Free Ceramics for High-Temperature Energy Storage Capacitors

Kong Xi,Yang Letao,Cheng Zhenxiang,Zhang Shujun

DOI: https://doi.org/10.1557/s43578-020-00007-2

2021-01-01

Abstract:A correction to this paper has been published: https://doi.org/10.1557/s43578-021-00216-3
Excellent energy storage density and superior discharge properties of NBT–NN–ST/ x HfO 2 ceramics via 0–3 type heterogeneous structure designing

Meng Shen,Guanghui Zhang,Husheng Wang,Wen Zhou,Yifei Zhang,Qifan Li,Qingfeng Zhang,Shenglin Jiang,Guangzu Zhang,Yong Chen

DOI: https://doi.org/10.1039/d3ta04033j

IF: 11.9

2023-01-01

Journal of Materials Chemistry A

Abstract:We demonstrate 0–3 type heterogeneous NBT–NN–ST/HfO 2 composites to achieve high E b and P max . Some HfO 2 are concentrated in grain boundaries to suppress local electric branches’ development for enhancing E b while others diffuse into lattice to improve bonds’ polarity for maintaining high P max .

materials science, multidisciplinary,chemistry, physical,energy & fuels
Study on properties of Hf6Ta2O17/Ta2O5 system: A potential candidate for environmental barrier coating (EBC)

Hao Li,Yiping Yu,Bing Fang,Peng Xiao,Song Wang

DOI: https://doi.org/10.1016/j.jeurceramsoc.2022.04.034

IF: 5.7

2022-04-01

Journal of the European Ceramic Society

Abstract:Ta2O5 doped Hf6Ta2O17 system (Hf6Ta2O17/Ta2O5) is considered to have potential application prospect in the field of aero-engine. We herein focus on the thermo-physical, mechanical properties and CMAS corrosion resistance of Hf6Ta2O17/Ta2O5 to systematically evaluate the possibility for the application of environmental barrier coating (EBC). By changing the content of Ta2O5, the gradient adjustment of thermal expansion coefficient can be realized while maintaining low thermal conductivity (1.5–2.2 W/(m·K)). The introduction of Ta2O5 significantly reduces the modulus and improves the fracture toughness. Single-phase Hf6Ta2O17 shows excellent corrosion resistance against molten calcium-magnesium-alumina-silicate (CMAS). The crystallization of CaTa2O6 and HfSiO4 is the important factor to prevent further corrosion. The introduction of Ta2O5 weakens the ability to prevent Si penetration and greatly increases the thickness of the corrosion layer. The results highlight the merit of Hf6Ta2O17/Ta2O5 system as potential candidate for multi-layer gradient coating on the surface of ceramic matrix composites.

materials science, ceramics
Enhanced recoverable energy storage density and efficiency in (1 − x)Ba0.85Ca0.15Zr0.1Ti0.9O3-xSrTiO3-MnO2 lead-free ceramics

Wenjin Yang,Fengzhen Huang,LiHuai Shu,YuLong Yang,Baolian Gong,Xiaomei Lu,Jinsong Zhu

DOI: https://doi.org/10.1039/d2tc00056c

IF: 6.4

2022-01-01

Journal of Materials Chemistry C

Abstract:Realizing enhanced energy storage performance by introducing SrTiO3 (ST) to Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT).
Constructing novel SrTiO3-based composite ceramics with high energy storage performance under moderate electric field

Chunhui Wu,Yongping Pu,Xiang Lu,Yating Ning,Bo Wang,Lei Zhang,Zhemin Chen,Yongqiang Yang

DOI: https://doi.org/10.1016/j.jpowsour.2024.234475

IF: 9.2

2024-06-01

Journal of Power Sources

Abstract:With the awakening of human environmental awareness, the research of lead-free dielectric ceramics is imperative. In this paper, an innovative tactic is proposed to improve the comprehensive energy storage properties of SrTiO3-based ceramics by constructing diphase compounds. The bismuth layer-structured BaBi2Nb2O9 ferroelectric is introduced into the perovskite-structured Sr0.6(Na0.5Bi0.5)0.4TiO3 ceramic through a traditional solid-state method. The breakdown strength is significantly enhanced with the increase of BaBi2Nb2O9, accompanied by the strengthened relaxor behavior. Ultimately, optimal (1-x)Sr0.6(Na0.5Bi0.5)0.4TiO3-xBaBi2Nb2O9 ceramics with x = 0.09 possess outstanding energy storage performance, involving high recoverable energy storage density of W rec ∼ 3.6 J/cm3 under moderate electric field, excellent conversion efficiency of η ∼ 94.3 %, superior stability of temperature (20∼120 °C) and frequency (1∼100 Hz). In addition, rapid discharge rate of t 0.9∼60.6 ns and high power density of 59.45 MW/cm3 at 160 kV/cm are also accomplished. This work certifies the possibility of establishing composite ceramics to design high energy storage materials.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Flexible Hf6Ta2O17@ Acidified Carbon Nanotube Composite Films with Enhanced Interfacial Interaction for High-Performance Supercapacitors

Yufeng Xue,Piao Ruan,Li Zhu,Yi Cao,Wenhao Fu,Jinqing Huang,Wenfeng Qiu

DOI: https://doi.org/10.1016/j.ceramint.2023.04.036

IF: 5.532

2023-01-01

Ceramics International

Abstract:Recently, various transition metal oxides (TMOs) have been introduced to modify carbon nanotubes (CNTs), demonstrating great potential for high energy storage performance. Herein, we designed a novel flexible composite film based on Hf6Ta2O17 (HTO) and CNTs to leverage their complementary advantages. HTO nanocrystals were prepared by the polymer derived ceramics (PDC) method, which could be uniformly distributed and firmly embedded on the surface of carboxy functionalized single-wall carbon nanotubes (SWCNTs). More importantly, we developed a new way to enhance the interfacial interaction between the TMOs and the carbon materials to optimize the energy storage performance of the resulting composites. Finally, the composite supercapacitor showed the maximum specific capacitance of 5862.5 mF cm-2 at the current density of 5 mA cm-2 with a potential window of 2 V, which was much higher than those obtained from the two materials alone. Furthermore, the synergistic effect was confirmed to efficiently reduce the work function of the composite as well as the energy required by the electronic transition. Our results implied that the composite materials based on TMO and carbon materials (e.g. nanotubes or graphene), including the flexible HTO@ acidified carbon nanotube composite film, holds real promise for the applications as promising energy storage materials.
Structure and the enhanced ferromagnetism in single phase Sr4Fe5CoO13-δ ceramic

Shuai Huang,Kang Zhu,Jun Huang,Jiwen Yang,Jianlin Wang,Zhengping Fu,Ranran Peng,Yalin Lu

DOI: https://doi.org/10.1016/j.ceramint.2022.03.271

IF: 5.532

2022-01-01

Ceramics International

Abstract:Oxides with superstructure have attracted special attention for their great tolerance in structure and composition regulation, which enables them to have great potential in energy conversion devices, electromagnetic regulation devices, spintronic devices, and so on. Here, we successfully prepared a superstructure oxide Sr4Fe5CoO13-δ via combustion method. X-ray photoelectron spectroscopy (XPS) and soft X-ray absorption spectra (XAS) analysis suggest that Co dopant could improve the amount of oxygen vacancies in oxides. Unlike the thermal activated electrical conducting behavior of Sr4Fe6O13-δ, Sr4Fe5CoO13-δ demonstrates an electrical behavior in line with the Mott's variable range hopping (VRH) model at low temperatures, implying the localization of electrons. Sr4Fe5CoO13-δ shows a ferromagnetic property with a high Curie temperature of 771 K, which should be attributed to the new formed Dzyaloshinskii-Moriya (D-M) interaction of Fe–O–Co, the increased lattice distortion and the increased amount of oxygen vacancies induced by Co dopant. These properties render it a broadened working temperature range and may contribute to explore high temperature spintronic devices.

A Study of Superstructure Hf6Ta2O17 Ceramics for Electrochemical Energy Storage Applications

Understanding Thermochemical Energy Storage Performance of Ba1-Sr CoO3- Perovskite System: A Computational and Experimental Study

Performance Enhancement of Hf-Ta-O Nanofiber Based Energy Storage Materials Using Oxygen-Vacancy and Its Application for Supercapacitor

Superior Energy Storage Performance of BiFeO3-BaTiO3-CaHfO3 Lead-Free Ceramics

Improved Energy Storage Performance of Ba0.4Sr0.6TiO3 Nanocrystalline Ceramics Prepared by Using Oxalate Co-Precipitation and Spark Plasma Sintering

Hf6Ta2O17/Ta2O5 composite ceramic: A new eutectic system

Improving energy storage performance enabled by composition-induced dielectric behavior in PbHfO3-based ceramics under low electric fields

Optimized energy storage performance in (Ba0.8Sr0.2)TiO3-based ceramics via Bi(Zn0.5Hf0.5)O3-doping

Oxygen vacancies on the surface of HxWO3−y for enhanced charge storage

Optimizing High-Temperature Energy Storage in Tungsten Bronze-Structured Ceramics Via High-Entropy Strategy and Bandgap Engineering

Multi-scale Collaborative Optimization of SrTiO3-based Energy Storage Ceramics with High Performance and Excellent Stability

Synthesis of Oxygen Vacancies-Enriched Titanate Nanostructures and Their Potassium Storage Properties Study

Structure Regulation and Performance Optimization Mechanism of Sr0.7Bi0.2TiO3-based Energy Storage Ceramics Based on Charged Defect Design Engineering

Properties and Microstructure of Ultrafine-Crystalline BaTiO3-based Energy Storage Ceramics

Bi(Mg0.5Hf0.5)O3-modified SrTiO3 Lead-Free Ceramics for High-Temperature Energy Storage Capacitors

Excellent energy storage density and superior discharge properties of NBT–NN–ST/ x HfO 2 ceramics via 0–3 type heterogeneous structure designing

Study on properties of Hf6Ta2O17/Ta2O5 system: A potential candidate for environmental barrier coating (EBC)

Enhanced recoverable energy storage density and efficiency in (1 − <i>x</i>)Ba<sub>0.85</sub>Ca<sub>0.15</sub>Zr<sub>0.1</sub>Ti<sub>0.9</sub>O<sub>3</sub>-<i>x</i>SrTiO<sub>3</sub>-MnO<sub>2</sub> lead-free ceramics

Constructing novel SrTiO3-based composite ceramics with high energy storage performance under moderate electric field

Flexible Hf6Ta2O17@ Acidified Carbon Nanotube Composite Films with Enhanced Interfacial Interaction for High-Performance Supercapacitors

Structure and the enhanced ferromagnetism in single phase Sr4Fe5CoO13-δ ceramic