Abstract:Swirl cooling is a promising cooling technology in gas turbine blade leading-edge. However, the swirl strength of coolant decreases rapidly along the swirl chamber, and there exists a low heat transfer zone between two adjacent nozzles. Moreover, the downstream heat transfer is always reduced by the crossflow. To solve this problem, the concept of swirl cooling with crossflow diverter was proposed, and the velocity fields and heat transfer performance were investigated in this paper. Numerical simulations were performed by using 3D steady flow solver of Reynolds-averaged Navier-Stokes equations (RANS). The turbulence model validations were performed against both smooth swirl chamber and circular tube with circumferential ribs, and the validation results pointed out that the SST k-. turbulence model had the highest accuracy in predicting the heat transfer in swirl chamber with diverters. To reveal the mechanism of crossflow suppression and heat transfer enhancement, the simulation results were compared with smooth swirl chamber under different Reynolds numbers. On this basis, the effects of crossflow diverter heights and locations were studied further. The results showed that for smooth swirl chamber, the swirl strength decayed linearly, and the heat transfer coefficients decreased rapidly, thus the high heat transfer zone cannot cover the whole region between these two adjacent nozzles. The circumferential velocity of the jet gradually decreased while the axial velocity increased, and the crossflow formed. Crossflow and downstream nozzle efflux produced interference effect. Because of friction effect, crossflow reduced the circumferential velocity of the downstream jets and made the jet deflect downstream. Thus, the high heat transfer area of the downstream target plane decreased sharply. For swirl chamber with crossflow diverters, the crossflow and downstream jets separated from each other. The ability of the downstream jet to penetrate the mainstream and scour the target surface was strengthened. Therefore, the heat transfer of the target surface near the downstream nozzle was enhanced. Higher Reynolds number contributed to a more obvious crossflow suppression and heat transfer enhancement effect.

Impingement Heat Transfer Enhancement in Crossflow by a Skewed Twisted Rib Pair for Simplified Leading Edge Structure

Heat transfer enhancement of return channel by using rib turbulator for a new impingement cooling scheme

Effects of Circumferential Ribs on Suppressing Cross-Flow and Enhancing Heat Transfer in Swirl Cooling

Heat Transfer Enhancement of Impingement Cooling by Different Crossflow Diverters

Jet Impingement Heat Transfer Enhancement With Different Crossflow Diverter Shapes

Numerical investigation on vane leading edge impingement cooling performance under influences of ribs established between adjacent jets

An Experimental Study of Impingement Heat Transfer on the Surfaces with Micro W-Shaped Ribs

Experimental and Numerical Investigation of Impingement Heat Transfer on the Surface with Micro W-shaped Ribs

Numerical investigation of mist/air impingement cooling on ribbed blade leading-edge surface

Influence of Surface Curvature and Jet-to-surface Spacing on Heat Transfer of Impingement Cooled Turbine Leading Edge with Crossflow and Dimple

Investigation of the roughened target plate to enhance the impingement heat transfer with reduced pressure loss

A comparative study of internal heat transfer enhancement of impingement/effusion cooling roughened by solid rib and slit rib

Impingement Heat Transfer Enhancement in Crossflow by V-Shaped Protrusion Vortex Generator

Jet Impingement Heat Transfer Characteristics with Variable Extended Jet Holes under Strong Crossflow Conditions

Numerical Investigation on Conjugate Heat Transfer of Impingement/effusion Double-Wall Cooling with Different Crossflow Schemes

Impingement cooling experiment of structured surface with micro-W-shaped ribs

Parametric Study on Flow Characteristics and Heat Transfer in Rectangular Channels with Strip Slits in Ribs on One Wall

Heat Transfer Enhancement of Impingement Cooling with Corrugated Target Surface

Heat Transfer Enhancement by V-shaped Protrusions on Jet Plate under Different Crossflow Conditions

Numerical Evaluation of a New Impingement Cooling Scheme with a Separate Return-Channel Applied to Turbine Blade Leading Edge

An Experimental Investigation Of Impingement Heat Transfer In Narrow Space With Full-Height Pin Fins