Selective oxidation of methanol to green oxygenates on vanadium-aluminum phosphate based catalysts
F. Blanco-Bonilla,R. Estevez,F.J. López-Tenllado,D. Luna,F.M. Bautista
DOI: https://doi.org/10.1016/j.cattod.2024.114517
IF: 5.3
2024-01-13
Catalysis Today
Abstract:The methanol transformation reaction in the presence of oxygen was carried out in the temperature range of 210-310 oC, over vanadium catalysts based on vanadium oxide (V 2 O 5 ) and on vanadium-phosphorus oxide (VPO) calcined at 450 oC in air. Specifically, the vanadium oxide systems with V 2 O 5 loadings below, above or corresponding to the theoretical monolayer (1-34 wt.% of V 2 O 5 ) were obtained by the impregnation of a mesoporous amorphous aluminum phosphate, AlPO 4 , calcined at different temperatures (from 350 oC to 650 oC) with vanadyl oxalate. Additionally, mechanical mixtures of either VPO or V 2 O 5 with AlPO 4 were also employed. Under the experimental conditions employed, with a methanol enriched feed (O 2 /methanol molar ratio=0.6), formaldehyde and dimethoxymethane were the main products obtained with all the catalysts studied. Vanadyl phosphate (VPO) exhibited slightly lower activity than vanadium oxide, formaldehyde being the main product (SFA ≥ 95%). The conversion of both vanadium oxide and vanadyl phosphate appreciably increased when mixed with the AlPO 4 , also promoting the formation of dimethoxymethane. The interaction of the vanadium species with the aluminum phosphate surface took place preferentially through the surface Al-OH groups, the vanadium species with less development being the most active in the formation of formaldehyde and dimethoxymethane, per at-g of vanadium.
chemistry, physical,engineering, chemical, applied