Abstract:Underwater bionic robotics or vehicles using oscillating flexible structures as power sources are attracting considerable attention. In this study, the hydrodynamic effect and fluid–structure coupled vibration of a flexible caudal fin actuated by macro fiber composites(MFC) are investigated. A fluid–structure coupled dynamic equation of the MFC-actuated caudal fin with a variable cross-section is established, and both the internal moment generated by the MFC and the complex-valued hydrodynamic forces are considered. Distributions and evolutions of the flow velocity and pressure in the vicinity of the oscillating caudal fin with different parameters are visualized through comprehensive parametric CFD simulations. Simulation results show that the presence of the gap introduces significant flow reshaping effects to the flow distribution and hydrodynamics. Distributions of the flow velocities and concentrated pressure regions depend highly on the gap width of the forked caudal fin. Then, a revised hydrodynamic function depending on three nondimensional governing parameters is developed, this is, the characteristic oscillating frequency, the width ratio, and the gap-to-width ratio. Formulas for the real and -imaginary parts of the complex-valued hydrodynamic function are developed respectively through the comprehensive CFD framework. Theoretical and experimental results show that the revised hydrodynamic function and developed model are capable of estimating the hydrodynamic effect and underwater dynamic response of the MFC-actuated caudal fin. Compared with the classical hydrodynamic function for the rectangular beam, the expression for the beam overestimates the added mass effect exerted on the caudal fin, and underestimates the hydrodynamic damping effect, thus leading to a smaller estimated resonant frequency and bandwidth, but a higher predicted response peak. These findings are useful for the robotic fish or autonomous underwater vehicles which are propelled by oscillating foils actuated by smart actuators.

Structure Design of A Novel Bionic Water-air Cross-Domain Vehicle

Design and Analysis of Co-axial Twin-Propeller Trans-media Vehicle.

Structure Designation and Dynamic Model Analysis of Folding Wing for Underwater Vehicles

Aerodynamic/Hydrodynamic Investigation of Water Cross-Over for a Bionic Unmanned Aquatic-Aerial Amphibious Vehicle

Design and Implementation of a Gliding Cross-Domain Vehicle

A Variable Wingspan Scroll Telescopic Wing for Multimodal Underwater Vehicles

Hydrodynamic Investigations of a Cross-Domain Vehicle with the Capability of High-Speed Cruising on Water Surface

Experimental Investigation of High Speed Cross-Domain Vehicles with Hydrofoil

TJ-FlyingFish: an Unmanned Morphable Aerial-Aquatic Vehicle System

Hydrodynamic Effect and Fluid-Structure Coupled Vibration of Underwater Flexible Caudal Fin Actuated by Macro Fiber Composites

Numerical Simulation of Water Entry of Two-Dimensional Structures with Complex Geometry Using a CIP-based Model

Survey on the novel hybrid aquatic–aerial amphibious aircraft: Aquatic unmanned aerial vehicle (AquaUAV)

An Aerial–Aquatic Robot with Tunable Tilting Motors Capable of Multimode Motion

Mechanical Design and Fluid Dynamics Simulation of a Reconfigurable Hybrid Aerial Underwater Vehicle

Hydrodynamic Performance Of A Flapping Wing Based Auv-A Numerical Study

Overview of Progress in Development of the Bionic Underwater Propulsion System

Design and field test of a foldable wing unmanned aerial–underwater vehicle

Design of bionic active folding flapping wing vehicle

Strongly coupled fluid–structure interaction analysis of aquatic flapping wings based on flexible multibody dynamics and the modified unsteady vortex lattice method

Conceptual design of a submersible aircraft with morphing technology

Design and Implementation of a Multimodal Tilt‐Rotor Unmanned Aerial‐Aquatic Vehicle