Abstract:Abstract Guar gum and its derivatives based-gels crosslinked with boron have been utilized in hydraulic fracturing for decades. However, these gels have a noticeable limit-large polymer loading which causes problems including large quantity of residues and low regained permeability. Besides, to achieve optimal thermal stability, conventional boron crosslinker must be utilized at high pH. To overcome the above limitation of conventional boron crosslinker, we proposed highly efficient nano boron crosslinker for low polymer loading fracturing fluids. Boron-modified nanoparticles were synthesized by two-step surface modification as nano boron crosslinker (NBC). First, (3-Aminopropyl) triethoxysilane was coated onto the silica nanoparticles surface obtaining amino-modified nanoparticles JT-1. Second, Organic boron (OBC) was coated onto JT-1 resulting in boron-modified nanoparticles (NBC). Characterization was given using FTIR spectroscopy to prove the presence of surface modifier and transmission electron microscopy (TEM) to study the particle size. The effect of pH and mass ratio of JT-1 and OBC on rheological properties of hydroxypropyl guar (HPG) gels crosslinked with NBC was investigated. The microstructures of NBC crosslinked-gels was visualized via Scanning Electron Microscope (SEM). The results of FTIR spectroscopy illustrate the presence of amino on the surface of JT-1 and OBC was bounded onto the surface of JT-1 by B-N. The particle size of NBC ranges from 20 to 40 nm. NBC crosslinked0.3 wt.% gels exhibit a unique rheological performance at 100°C. The viscosity of OBC crosslinked-gels shows a tendency of first increase and then fall as pH ranges from 7 to 14 and peak viscosity was achieved at pH 10. Whereas, viscosity of NBC crosslinked-0.3 wt.% gels increased continuously from 44.72 mPa•s to 327.8 mPa•s as pH rises from 7 to 14. The remaining viscosity (viscosity after shearing at 170s−1 for 60 min) at 100 °Cof NBC-crosslinked 0.3 wt.% HPG gels remains higher than 50 mPa•s at pH 8 -14, indicating that NBC crosslinked-gels possessed great thermal stability at low polymer loading over a wide pH range. The difference between microstructures of NBC crosslinked-gels at different pH may be responsible for the effect of pH on the thermal stability of NBC crosslinked-gels. Gels crosslinked at higher pH gave a more coiled 3D microstructures with considerably higher structure density compared with those crosslinked at pH 7. The hydraulic fracturing fluid system crosslinked with surface modified nano boron crosslinker showed great thermal stability at low polymer loading (0.3 wt.%) over wide pH range (8-14). Due to its unique crosslinking properties with HPG, nano boron crosslinker may provide an excellent solution to the limits of conventional boron crosslinked gels.

Study of Crosslinker Size on the Rheological Properties of Borate Crosslinked Guar Gum.

Synthesis and Crosslinking Mechanism of Colloidal Graphene Oxide Crosslinker for Crosslinking Low-Concentration Hydroxypropyl Guar Gum Fracturing Fluids

Mechanism Analysis of Enhancing the Temperature and Shear Resistance of Hydroxypropyl Guar Gum Fracturing Fluid by Boron-Functionalized Nanosilica Colloidal Crosslinker

Influence of Organoboron Cross-Linker and Reservoir Characteristics on Filtration and Reservoir Residual of Guar Gum Fracturing Fluid in Low-Permeability Shale Gas Reservoirs

Experimental investigation on the high-pressure sand suspension and adsorption capacity of guar gum fracturing fluid in low-permeability shale reservoirs: factor analysis and mechanism disclosure

Synthesis and Properties of Organoboron Functionalized Nanocellulose for Crosslinking Low Polymer Fracturing Fluid System.

Modification of Low Molecular Weight Guar Gum with Etherifying Agent

A Study of Relation Between Suspension Behavior and Microstructure and Viscoelastic Property of Guar Gum Fracturing Fluid

Rheological Properties of the Regenerable Gel Systems of Low Molecular Weight Carboxymethyl Guar Gum

Highly Efficient Nano Boron Crosslinker for Low-Polymer Loading Fracturing Fluid System

Rheological Properties of the Low Molecular Weight Cationic Guar Gum Cross-Linked Gel Systems

Coupled Computational and Laboratory Investigations of Interface Interactions between Binary Polymers, Hydroxypropyl Guar, and Potassium Formate for Crosslinked Hydraulic Fracturing Fluids

Rheological Behaviors of Fluorinated Hydrophobically Associating Cationic Guar Gum Fracturing Gel

Comparative Studies on Hydraulic Fracturing Fluids for High-Temperature and High-Salt Oil Reservoirs: Synthetic Polymer Versus Guar Gum

Characterizing the crosslinking process of borate and hydroxypropyl guar gum by diffusing wave spectroscopy

Technology research of the recycled low molecular guar gum f racturing fluid

Preparation and Antifiltration Performance of Organic Zirconium Crosslinker for Guar Gum‐Fracturing Fluid

Rheological Study on Regenerable Low Molecular Weight Carboxymethyl-Hydroxypropyl Guar Gum Gel

Study of Fracturing Fluid on Gel Breaking Performance and Damage to fracture conductivity

Sulfonation Modification of Guar Gum and Its Performance As a Fracturing Fluids Thickener

Quantitative characterization of the crosslinking degree of hydroxypropyl guar gum fracturing fluid by low-field NMR