Abstract:Secondary aluminum dross from aluminum smelter plants is a hazardous waste with no effective method for realizing its disposal and utilization safely. This research evaluated the potential of preparing novel high-temperature-resistant sulfoaluminate-magnesia aluminum spinel (SAC-MA) cement using secondary aluminum dross, carbide slag, magnesite tailings and desulfurization gypsum as the raw materials for the replacement of natural resources. Furthermore, the leaching toxicity of unroasted and preroasted secondary aluminum dross was analyzed. The mineral phase and microstructure of clinkers and hydration products were also considered and their effect on the mechanical properties and microstructure of the high-temperature-resistant SAC-MA samples was researched. The experimental results showed that roasting detoxification was effective in realizing the safe disposal of secondary aluminum dross and magnesia aluminum spinel, dicalcium silicate and Fe -> Al substitutional ye'elimite formed in the SAC-MA clinker after the sintering using hazardous and industrial solid waste. Improved high temperature resistance of SAC was also observed. High temperature induced the decomposition of ettringite and led to its structural relaxation. Surprisingly, the existence of magnesia aluminum spinel made the structure of ettringite smaller and decreased the decomposition degree of ettringite, as well as improving the high temperature resistance of SAC. Changes in the main skeletal structures of ettringite and AH3 gel were not noticeable, which still had good stability at 200 degrees C for the SAC-MA sample. However, ettringite gradually became amorphous at 200 degrees C for the SAC sample. These results strongly indicated that using hazardous waste, including secondary aluminum dross, as raw materials for preparing SAC-MA was far superior to SAC with regards to high temperature resistance. This study contributed a novel example of converting hazardous and industrial solid waste into high valueadded materials and may open a new approach for synthesizing high temperature-resistant SACMA cement from low-cost feedstocks.

Recycling of Hazardous and Industrial Solid Waste As Raw Materials for Preparing Novel High-Temperature-resistant Sulfoaluminate-Magnesia Aluminum Spinel Cement

A Novel Value-Added Utilization Route for Washed Residue of Secondary Aluminum Dross: Preparing Corundum-Spinel Ceramic Spheres for High-Temperature Heat Storage

Preparation and Properties of a Sulphoaluminate Magnesium-Potassium Phosphate Green Cementitious Composite Material from Industrial Solid Wastes

Thermal co-treatment of aluminum dross and municipal solid waste incineration fly ash: Mineral transformation, crusting prevention, detoxification, and low-carbon cementitious material preparation

Preparation, Microstructure, and Mechanical Properties of Spinel-Corundum-Sialon Composite Materials from Waste Fly Ash and Aluminum Dross

Feasibility of Aluminum Recovery and MgAl2O4 Spinel Synthesis from Secondary Aluminum Dross

Utilization of municipal solid waste incineration fly ash for sulfoaluminate cement clinker production.

Preparation of Calcium Aluminate and Spinel by Hydrolysis and Calcination from Secondary Aluminum Dross

Isothermal foaming-nucleation-crystallization of glass ceramic foams with hierarchical pore structure: A sustainable approach for disposal of secondary aluminum ash

Production of Quasi-Sulfoaluminate Cementitious Materials with Electrolytic Manganese Residue

Research on synergistic disposal and high-value utilization of secondary aluminum dross and spent carbon anode

Co‐utilization of Secondary Aluminum Dross and Ferronickel Slag for Preparation of Cordierite–mullite Insulating Ceramic

Study on Properties of Sulfoaluminate Cement-Based Materials Made from Municipal Solid Waste Incineration Fly Ash

Calcination of sewage sludge-based sulphoaluminate cement clinker: Mineral formation mechanism and heavy metal transition behaviors

Removal of impurities for the synthesis of high-property alumina-spinel ceramic from secondary aluminum dross

Research on the Preparation Parameters and Basic Properties of Premelted Calcium Aluminate Slag Prepared from Secondary Aluminum Dross

A novel route to denitrify, recover chlorines and prepare pre-melted refine slag of 12CaO?7Al<sub>2</sub>O<sub>3</sub> (C<sub>12</sub>A<sub>7</sub>) from secondary aluminum dross (SAD)

Insights into Microstructural Alterations in Alkali-Activated Materials Incorporating Municipal Solid Waste Incineration Fly Ash

Synthesis of high belite sulfoaluminate cement with high volume of mixed solid wastes

Preparation and 3D printing building application of sulfoaluminate cementitious material using industrial solid waste

Assessing the Performance and Sustainability of Ecological Mortar with Municipal Solid Waste Incineration Fly Ash Solidified by Sulphoaluminate Cement