Abstract:The service life of cutting tools significantly affects machining costs. Establishing end-of-life criteria is crucial to mitigate wear effects on part quality, machine integrity, and maximize tool utilization. This is particularly important in machining operations with materials featuring numerous surface defects, as observed in those processed by prior thermal cutting operations, leading to accelerated tool wear rates. This study compares tool life and wear mechanisms in conventional and high-feed turning of low carbon manganese-alloyed steel bushes, previously profiled by plasma thermal cutting. Machinability tests utilized Class P carbide tools with triangular geometry for conventional turning and rhombic geometry for high-feed turning, both coated for enhanced performance. Tool's end-of-life criterion was established per ISO 3685 standard. The machining parameters adopted include a standard cutting depth of 1.5 mm, varying cutting speeds (140, 160, and 200 m/min) and feed rates (0.2; 0.3; 0.4 mm/rev for conventional turning, and 0.5; 0.75; 0.82 mm/rev for high-feed turning). Analysis involved assessing tool wear rates by observing flank wear and analyzing it using scanning electron microscopy and energy-dispersive spectroscopy techniques. Machined surface quality was quantified by roughness measurements. Metallographic characterization of bushes post-cutting indicated thermal cutting effects on the cutting edge's microstructure, microhardness, and residual stress. Machinability test results showed superior wear resistance in the high-feed turning tool (wear rate about 13 % lower). Surface finish evaluation demonstrated that, when isolating the effects of tool geometry and feed rate, the average surface roughness increased at a similar rate with tool wear for both conventional turning and high-feed turning. Identical wear mechanisms were observed: abrasive on the flank and adhesive on the rake face. Thus, the superiority of high-feed turning over conventional turning is established under the evaluated machining conditions.

Cutting mechanics and efficiency of forward and reverse multidirectional turning

Multi-objective modeling and evaluation for energy saving and high efficiency production oriented multidirectional turning considering energy, efficiency, economy and quality

Energy saving and high efficiency production oriented forward-and-reverse multidirectional turning: Energy modeling and application

Turning Part Design for Joint Optimisation of Machining and Transportation Energy Consumption

Optimisation of Cutting Parameters for Improving Energy Efficiency in Machining Process

Multi-objective optimisation for energy saving and high efficiency production oriented multidirectional turning based on improved fireworks algorithm considering energy, efficiency and quality

Pareto Fronts of Machining Parameters for Trade-off among Energy Consumption, Cutting Force and Processing Time

Energy Modeling for Variable Material Removal Rate Machining Process: an End Face Turning Case

Analysis of Multi-Objective Optimization of Machining Allowance Distribution and Parameters for Energy Saving Strategy

Mechanics and Dynamics of Multifunctional Tools

Therblig-based Modeling Methodology for Cutting Power and Its Application in External Turning

The Dynamic Comprehensive Evaluation of the Importance of Cutting Parameters in the Side Milling TC4 Process Using an Integrated End Mill

Comparison of Tool Wear, Surface Roughness, Cutting Forces, Tool Tip Temperature, and Chip Shape during Sustainable Turning of Bearing Steel

Effect of Aspect Weight and Machining Progression on Machinability: Modeling and Machining Case Study

Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel

Cutting Energy Consumption Modeling by Considering Tool Wear and Workpiece Material Properties for Multi-Objective Optimization of Machine Tools

Performance analysis of conventional and high-feed turning tools in machining the thermally affected zone after plasma arc cutting of low carbon manganese-alloyed steel

Evaluation of cutting parameters during dry turning of AISI 304 stainless steel and optimization through a modified WPCA approach

Optimization of Surface Quality and Power Consumption in Machining Hardened AISI 4340 Steel

Mathematical modeling of cutting layer geometry and cutting force in orthogonal turn-milling

Determinant of Dynamics and Interfacial Forces in Ultraprecision Machining of Optical Freeform Surface through Simulation-Based Analysis