Abstract:Low-rise cold-formed steel (CFS) structures have been used extensively in the low to moderate seismicity zones in many parts of the world. Quite several studies have been conducted focusing on their seismic or wind performance, respectively, neglecting their sensitivity to multi-hazard loading conditions, such as combined strong winds and earthquakes, et al. There is a possibility that strong winds and earthquakes will occur simultaneously based on previous and this paper's studies. However, there is no systematic method for assessing the performance of engineering structures subjected to multi-hazard effects. To fill the above research gaps, this article, drawing upon the research findings of meteorologists and geologists, explicates the mechanisms responsible for the simultaneous occurrence of earthquakes and strong winds. Employing statistical analysis techniques, it explores the probability of concurrent incidents of strong winds and earthquakes through the examination of extensive meteorological and seismic historical data from diverse representative regions. Based on this foundation, establishes a multi-hazard performance assessment method applicable to various structures and hazards and takes two common low-rise CFS structures with and without diagonal struts as the research objects, analyses the dynamic response of both under the combined effects of earthquake and wind loads and completes the performance assessment of CFS structures subject to typical multi-hazard effects. The results are as follows: 1 In various geographical regions, there are instances of strong winds and earthquakes occurring simultaneously. These two distinct forms of disasters exhibit a measurable probability of simultaneous incidence, with this likelihood being notably elevated in particular geographical zones; 2 The multi-hazard performance assessment method proposed herein can effectively take into account the uncertainty of structures and loads, and has good generalizability; 3 For the CFS structures, the effect of earthquake is more significant than that of wind, but with the addition of wind load, the overall dynamic response of the structures is significantly enhanced and the damage probability is significantly increased, and the combined effect of earthquake and wind cannot be ignored; 4 The continuous wind load effect will cause the CFS structures to acquire a greater dynamic response at the end of the earthquake, in other words, a significant increase in the post-earthquake wind effect compared to the pre-earthquake wind; 5 The existence of diagonal struts inside the CFS panels can effectively reduce the dynamic response and damage probability generated by the combined effects of earthquake and wind. The study results can raise researchers' attention to the combined effects of earthquakes and winds and provide a reference for future design methods for multi-hazard resistance of CFS structures.

Fragility assessment and optimum design of a steel–concrete frame structure with hybrid energy-dissipated devices under multi-hazards of earthquake and wind

Performance-Based Seismic Design and Evaluation of Fused Steel Diagrid Frame

Fragility Analysis of RC Frame Structures Subjected to Obliquely Incident Seismic Waves

Multi-hazard performance assessment of low-rise cold-formed steel structures subjected to combined earthquake and wind

Analytical Model for Multi-Hazard Resilient Prefabricated Concrete Frame Considering Earthquake and Column Removal Scenarios

Experimental and analytical fragility assessment of a combined heavy timber–steel‐braced frame through hybrid simulation

Experimental Study of a Novel Multi-Hazard Resistant Prefabricated Concrete Frame Structure

Multi-hazard design of low-damage high-rise steel–timber buildings subjected to wind and earthquake loading

Lifetime multi-hazard fragility analysis of transmission towers under earthquake and wind considering wind-induced fatigue effect

Adaptive Passive-Control for Multi-Stage Seismic Response of High-Rise Braced Frame Using the Frictional-Yielding Compounded BRBs

Performance-based-plastic-design of damage-control steel MRFs equipped with self-centring energy dissipation bays

Fragility functions for low‐damage post‐tensioned timber frames

Probabilistic seismic performance evaluation of composite frames with concrete-filled steel tube columns and buckling-restrained braces

Damage-control design and hybrid tests of a full-scale two-story buckling-restrained braced steel moment frame with sliding gusset connections

Comparative seismic analysis of frames with shape memory alloy slip friction dampers

Effects of Seismic and Progressive Collapse Designs on the Vulnerability of RC Frame Structures

Multivariable fragility surfaces for earthquake-induced damage assessment of buildings integrating structural features

Dynamic performance and cross-level damage criteria of strengthened reinforced concrete frames with VE energy dissipation braces

Hybrid Bayesian-Copula-based damage probability estimation for steel-concrete composite tall buildings under concurrent seismic and wind loads

An Innovative Dual-Level Energy Dissipation System with Friction/Yielding Dampers: Numerical and Theoretical Approaches

Multiperformance optimization design of a hybrid vibration mitigation system for super high‐rise buildings to improve earthquake resistance