Abstract:This paper presents the experimental development and analytical modelling of cost-effective Optical Fiber Tweezers fabricated from tapered optical fibers. The optical fiber tweezers use a 976 nm pump laser to obtain the multimode effect in conventional silica optical fibers (since it is below the cutoff wavelength). In addition, the taper is performed in the optical fiber using a conventional optical fiber splicing machine, where the diameter of the taper can be controlled by simply changing the taper parameters. The simplified analytical model is performed for the analysis of the intensity and optical power variations of the fiber tip as a function of the axial distance and angle between the fiber tip and the region of interest as well as the attractive (or repulsive) force on the optical field. In this case, 3 optical fiber tweezers were fabricated with different tip diameters and tested as a function of two set of particle specimens, one using polystyrene with 17 μ m diameter and the other with glass particles of 3.2 μ m. Results show that the repulsive forces presented in the force estimation model do not occur as expected, where all optical fiber tweezers presented higher attractive forces than the expected by the analytical model. Such differences can be related to the phototermal effect, which may have led to an unbalanced relation between its sub-effects known as thermophoresis and negative photophoresis. The results also indicated a high dependency of the attractive forces as a function of the optical fiber tip diameter, where the fiber tweezer with smallest diameter presented a fivefold and fourfold increase in the optical force when compared with the fiber tweezer with highest diameter for polymer and glass particles, respectively. Therefore, the proposed approach is a cost-effective method with relatively large control of the optical fiber tip for the optical actuator of micro-scale particles.

Analysis of Trapping Force of Beak-Shaped Optical Tweezers with Annular Core Fibers for Particles

A Focal Spot with Variable Intensity Distribution for Optical Tweezers

Simulation for the trapping force on Mie micro-particles in optical tweezers

Arbitrary Manipulation of Micro-Particles in Three Dimensions by Steering of Multiple Orbital Angular Momentum Modes

Optical tweezers based on near-field optical theory

Investigation of near-field optical tweezers based on the edge effect of extraordinary optical transmission in thin microcavity

Theoretical Research and Comparison of Forces in Optical Tweezers Based on Ray Optics Method and T Matrix Method

Experimental and analytical analysis of tapered optical fiber tweezers

Controllable Multi-Trap Optical Tweezers Based on Low Loss Optical Phase Change and Metalens

Quantitative Study of Conservative Gradient Force and Non-Conservative Scattering Force Exerted on a Spherical Particle in Optical Tweezers

Modelling Optomechanical Responses in Optical Tweezers Beyond Paraxial Limits

Manipulation of yeast cells by a tapered fiber probe and measurement of optical trapping force

Field distribution of optical fiber probe for trapping particle

Enhancing the Applied Force and Range of Axial Optical Tweezers

Optical fiber tweezers: From fabrication to applications

Fractal Conical Lens Optical Tweezers

Optical Trapping with Focused Airy Beams

Theory of Nanometric Optical Tweezers

FDTD Simulation of Optical Force under Non-Ideal Conditions

Shape-induced force fields in optical trapping

Optical trapping of two different microparticles by a double-tapered fiber probe